折反式眼底相机光学系统设计

李灿; 宋淑梅; 刘英; 李淳; 李小虎; 孙强

doi:10.3788/OPE.20122008.1710

您当前的位置：

首页 >

文章列表页 >

折反式眼底相机光学系统设计

现代应用光学 | 更新时间：2020-08-12

- 折反式眼底相机光学系统设计
- Design of optical system for catadioptric fundus camera
- 光学精密工程 2012年20卷第8期页码：1710-1717
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所, 吉林长春 130033
  2. 中国科学院研究生院北京,100039
- 作者简介：
- 基金信息：
  
  国家863高技术研究发展计划资助项目(No.2007AA12Z110)();国家自然科学基金资助项目(No.60977001)()
- DOI：10.3788/OPE.20122008.1710
  中图分类号： TH773
- 收稿日期：2012-02-29，
  
  修回日期：2012-03-14，
  
  纸质出版日期：2012-08-10
- 稿件说明：
移动端阅览
李灿, 宋淑梅, 刘英, 李淳, 李小虎, 孙强. 折反式眼底相机光学系统设计[J]. 光学精密工程, 2012,(8): 1710-1717

LI Can, SONG Shu-mei, LIU Ying, LI Chun, LI Xiao-hu, SUN Qiang. Design of optical system for catadioptric fundus camera[J]. Editorial Office of Optics and Precision Engineering, 2012,(8): 1710-1717
李灿, 宋淑梅, 刘英, 李淳, 李小虎, 孙强. 折反式眼底相机光学系统设计[J]. 光学精密工程, 2012,(8): 1710-1717 DOI： 10.3788/OPE.20122008.1710.

LI Can, SONG Shu-mei, LIU Ying, LI Chun, LI Xiao-hu, SUN Qiang. Design of optical system for catadioptric fundus camera[J]. Editorial Office of Optics and Precision Engineering, 2012,(8): 1710-1717 DOI： 10.3788/OPE.20122008.1710.

摘要

为控制传统眼底相机的杂光和鬼像

设计了一款40°视场、48 mm工作距离的折反式眼底相机光学系统。设计了离轴反射式网膜物镜

引入了自由曲面以校正其离轴像差

成像物镜中采用两个自由曲面对网膜物镜的剩余像差进行校正。建立了一种离焦眼模型

用于优化成像光路

消除人眼像差对成像的影响

同时得到不同视度缺陷眼的成像光路。照明光路中使用3个相邻的环形光阑

减少了眼球光学系统反射的杂光。成像光学系统可在-10~+10 m

-1

调焦

物方各视场分辨率为33 lp/mm

系统畸变小于8.5%;照明光学系统在不产生鬼像的前提下

可均匀照明眼底

照度非均匀性在15%以内。实验表明

引入自由曲面的折反式眼底相机

有效地消除了杂光和鬼像

满足大视场和大工作距离的要求。

Abstract

To eliminate the scatter light and central ghost in a classical fundus camera

the optical system of a catadioptric fundus camera with a field of view 40? and a working distance of 48 mm was designed. An off-axial reflecting ophthalmic lens with free form surfaces was designed to correct the off-axial aberrations. Two free-form-surfaces were introduced in the imaging objective system to correct the residual off-axial aberrations of the reflective ophthalmic lens. In the optimization of the imaging system

an eye model with varying defocuses was proposed to eliminate the negative effect of eye aberrations as well as to accommodate the eye with different refractive errors. Three adjacent illumination rings were introduced in the illumination part to avoid the undesirable light reflected by the eye optical system. Experiments show that the accommodation range of the system is between -10 m

-1

and 10 m

-1

the resolution at the object plane is 33 lp/mm across the entire field of view

and the maximum distortion is less than 8.5%.Furthermore

the illumination non-uniformity is less than 15% in the conditions without scatter light and central ghost. The designed catadioptric fundus camera with a free-form-surfaces show a satisfactory large field of view and a large working distance

and removes the undesirable scatter light and central ghost greatly.

关键词

Keywords

references

李淳,孙强,刘英,等. 眼底相机的均匀照明及消杂光干扰设计[J]. 中国光学, 2010,3(4):363-368. LI C,SUN Q,LIU Y, et al.. Design of uniform illumination system of fundus camera and its stray light shield [J]. Chinese Optics,2010,3(4):363-368. (in Chinese)

崔桂华. 眼底照相机光学系统中杂光和鬼像的控制[J]. 光电技术,2006,26(2):139-141. CUI G H. Control of ghost and scatter light internal camera [J].Opt.Technique,2006,(26):139-141.(in Chinese)

DELORI F C, PFLIBSEN K P. Spectral reflectance of the human ocular fundus[J]. Applied Optics,1989,28(6):1065-1077.

DEHOG E,SCHWIEGERLING J. Optimal parameters for retinal illumination and imaging in fundus cameras [J]. Applied Optics, 2008,47(36):6769-6777.

KAZUHIRO M,UTSUNOMIYA. Ophthalmologic apparatus:USA,6585374B2 .2003-7-1 .

BUCHHEISTER J,MUELLER L. Reflex free double pass objective due to reflective free form surfaces[J]. SPIE,2008,7100 (71000N-1):1-10.

SHIBATA N, TORII M. Fundus camera:USA, 6654553 .2003-8-1.

姜洋,孙强,谷立山,等. 折/衍混合自由曲面式头戴显示器光学系统设计[J] . 光学精密工程, 2011,19(3):508-514. JIANGY,SUN Q,GU L SH, et al..Design of optical system of HMD using hybrid refractive/diffractive and free-form surfaces[J]. Opt.Precision Eng., 2011,19(3):508-514.(in Chinese)

赵清亮,郭兵,杨辉,等. 金刚石飞切加工微结构表面的表面粗糙度研究[J]. 光学精密工程,2009,17(10):2512-2519. ZHAO Q L,GUO B,YANG H, et al.. Surfaces roughness study in diamond fly-cutting of micro-structured surface[J].Opt. Precision Eng.,2009,17(10):2512-2519.(in Chinese)

张以谟.应用光学[M]. 北京:电子工业出版社,2008. ZHANG Y M.Applied Optics[M].Beijing:Publishing House of Electronics Industry,2008.(in Chinese)

王肇圻,王尧,全薇. 基于眼模型的非球面眼底荧光相机的设计[J]. 光学精密工程, 2010,18(7):1511-1519. WANG ZH Q,WANG Y, QUAN W.Design of aspheric FFA camera based on eye model[J].Opt.Precision Eng., 2010,18(7):1511-1519.(in Chinese)

王肇圻,许妍. 基于眼模型的数字眼底相机设计[J]. 光学精密工程,2008,16(9):1567-1571. WANG ZH Q,XU Y.Design of digital retina camera based on eye model[J].Opt.Precision Eng., 2008,16(9):1567-1571.(in Chinese)

MOUROULIS P. Visual Instrumentation[M]. New York:McGraw-Hill,1999:106-110, 277-280.

NAOKI I, MAKIHIRO I.Fundus Camera:USA, 2009/0180073A1 .2009-7-16.

DEHOOG E,SCHWIEGERLING J.Fundus camera systems: a comparative analysis[J]. Applied Optics,2009,48(2):221-228.

浏览量

435

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

立体成像眼底相机光学系统设计

三次样条插值优化渐进多焦点镜片非对称设计

小行星地形探测激光雷达接收光学系统设计

近红外二区宽谱段光学成像系统设计

基于液晶光栅的大视场红外凝视成像系统设计