飞秒激光切割与微细电阻滑焊组合制备三维金属微结构

徐斌; 伍晓宇; 凌世全; 吴世云; 罗烽; 杜晨林; 孙秀泉

doi:10.3788/OPE.20122008.1811

您当前的位置：

首页 >

文章列表页 >

飞秒激光切割与微细电阻滑焊组合制备三维金属微结构

微纳技术与精密机械 | 更新时间：2020-08-12

- 飞秒激光切割与微细电阻滑焊组合制备三维金属微结构
- Fabrication of 3D metal micro-structure based on fs laser cutting and micro electric resistance slip welding
- 光学精密工程 2012年20卷第8期页码：1811-1823
- 作者机构：
  
  1. 深圳大学机电与控制工程学院深圳市模具先进制造技术重点实验室,广东深圳,518060
  2. 深圳大学电子科学与技术学院深圳市激光工程重点实验室,广东深圳,518060
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目(No.51175348)();深港创新圈计划资助项目(No.ZYB200907090135A)();广东省教育厅重点实验室开放基金资助项目(N
- DOI：10.3788/OPE.20122008.1811
  中图分类号： TG661
- 收稿日期：2012-04-11，
  
  修回日期：2012-05-14，
  
  纸质出版日期：2012-08-10
- 稿件说明：
移动端阅览
徐斌, 伍晓宇, 凌世全, 吴世云, 罗烽, 杜晨林, 孙秀泉. 飞秒激光切割与微细电阻滑焊组合制备三维金属微结构[J]. 光学精密工程, 2012,(8): 1811-1823

XU Bin, WU Xiao-yu, LING Shi-quan, WU Shi-yun, LUO Feng, DU Chen-lin, SUN Xiu-quan. Fabrication of 3D metal micro-structure based on fs laser cutting and micro electric resistance slip welding[J]. Editorial Office of Optics and Precision Engineering, 2012,(8): 1811-1823
徐斌, 伍晓宇, 凌世全, 吴世云, 罗烽, 杜晨林, 孙秀泉. 飞秒激光切割与微细电阻滑焊组合制备三维金属微结构[J]. 光学精密工程, 2012,(8): 1811-1823 DOI： 10.3788/OPE.20122008.1811.

XU Bin, WU Xiao-yu, LING Shi-quan, WU Shi-yun, LUO Feng, DU Chen-lin, SUN Xiu-quan. Fabrication of 3D metal micro-structure based on fs laser cutting and micro electric resistance slip welding[J]. Editorial Office of Optics and Precision Engineering, 2012,(8): 1811-1823 DOI： 10.3788/OPE.20122008.1811.

摘要

提出了一种采用飞秒激光切割结合微细电阻滑焊制备3D金属微结构的工艺方法(微型化双工位金属箔叠层制造法

(Micro-DLOM))

并通过制备具有复杂形状的3D微型腔模具验证了该工艺方法的可行性。首先

以厚度为10 μm的0Cr18Ni9不锈钢箔为基材

在110 mW的飞秒激光功率、100 μm/s的切割速度和0.75 μm的切割补偿量下获得二维微结构

并分析了激光功率和切割速度对切割精度的影响;然后

利用微细电阻滑焊对多层二维微结构进行热扩散焊接

通过多层二维微结构的叠加拟合形成具有曲面特征的微型腔

并对焊接区进行了X射线衍射(XRD)分析。分析发现:微细电阻滑焊所产生的热量仅使焊接区主要物相的相对含量发生了变化

而没有使该区域产生新的物相。与UV-LIGA工艺相比

本工艺可以加工具有自由曲面特征的三维微结构

并且单层钢箔越薄

成形精度越高;与飞秒激光分层平面扫描烧蚀工艺相比

本工艺仅需切割每层二维结构的轮廓

提高了成形效率;与微细电火花加工工艺相比

虽然所成形的微型腔表面粗糙度相对较差

但却省去了制备微电极的工艺步骤

并且不存在微电极工作过程中的损耗问题

所以可以加工深宽比不受限制的微模具。

Abstract

On the basis of femtosecond laser cutting and micro electric resistance slip welding

a forming process named Micro Double-staged Laminated Object Manufacturing(Micro-DLOM) was proposed to fabricate a complex 3D micro-structure

and the feasibility of the forming process was demonstrated by fabrication of a complex 3D micro-cavity mold. Firstly

0Cr18Ni9 stainless steel foils with the thickness of 10 μm were cut by a femtosecond laser to get a 2D microstructure under a femtosecond laser power of 110 mW

a cutting speed of 0.1 mm/s and the cutting compensation quantity of 0.75 μm. Then

the influence of laser power

cutting speed on cutting precision was analysed

and the foils were welded together to get the 3D microstructure.For further study

the weld-zone was analysed by X-ray Diffractometry(XRD) and it was found that the phase of weld zone has not been changed but the content of phase changed. Compared with UV-LIGA

the Micro-DLOM can fabricate the 3D micro-structure with a free-form surface and the unrestricted ratio of depth to width. Moreover

the thinner the stainless steel foils the

the higher the processing accuracy is. Compared with femtosecond laser ablation

the Micro-DLOM only needs to cut every layer’s outline and has a higher forming efficiency. Compared with micro-EDM

the 3D micro-structure fabricated by Micro-DLOM has a large surface roughness

but it needs not fabricate different microelectrode faces and can fabricate the 3D micro-structure with unrestricted ratio of depth to width.

关键词

Keywords

references

YOSHIHIRO H. LIGA process-micromachining technique using synchrotron radiation lithography and some industrial applications [J]. Nuclear Instruments and Methods in Physics Research, 2003(208):21-26.

LERMER F, URBAN A. Challenges, developments and applications of silicon deep reactive ion etching [J]. Microelectronic Engineering, 2003,67-68:349-355.

WENMIN Q. 3D-UV micro-forming: principles and application [J]. Engineering Science and Education Journal, 1999(2):13-19.

DONGKEON L, HARUTAKA M, HIROSHI H. 3D UV-microreplication using cylindrical PDMS mold [J]. Microsyst Technol, 2010(16):1399-1411.

SHIU P P,KNOPF G K,OSTOJIC M. Fabrication of metallic micro-molds by laser and electro-discharge micromachining [J]. Microsyst Technol, 2010(16):477-485.

THIAN S, TANG Y,FUH J Y H, et al.. Formation of micro-moulds via UV lithography of SU8 photoresist and nickel electrodeposition [J]. J. Engineering Manufacture, 2006(220):329-333.

WANG M W. Microceramic injection molding of a multilayer micropatterned micropart [J]. Int. J. Adv. Manuf. Technol, 2010(51):145-153.

ATTIA U M,MARSON S, ALCOCK J R. Micro-injection moulding of polymer microfluidic devices [J]. Microfluid Nanofluid, 2009(7):1-28.

TAKAYUKI S, YOICHI T, TAKAHIRO K, et al.. Micromachining of electroformed nickel mold using thick photoresist microstructure for imprint technology [J]. Microsyst Technol, 2008(14):1359-1365.

黄新龙,熊瑛,陈光炎,等. UV-LIGA技术制作微型螺旋形加速度开关[J]. 光学精密工程,2010,18(5):1152-1157. HUANG X L, XIONG Y, CHEN G Y, et al.. Fabrication of micro spiral acceleration switch using UV-LIGA technology [J]. Opt. Precision Eng., 2010,18(5):1152-1157. (in Chinese)

胡洋洋,朱荻,李寒松,等. UV-LIGA制作超高微细阵列电极技术[J]. 光学精密工程,2010,18(3):670-675. HU Y Y, ZHU D, LI H S, et al.. Fabrication of ultra-high metal micro electrode array using UV-LIGA technology [J]. Opt. Precision Eng., 2010,18(3):670-675. (in Chinese)

明平美,朱荻,周锋,等. 用UV-LIGA技术制造大通孔率镍网[J]. 光学精密工程,2009,17(6):1267-1273. MING P M, ZHU D, ZHOU F,et al.. Fabrication of metal micro-precision sieves with high open areas using UV-LIGA process[J]. Opt. Precision Eng., 2009,17(6):1267-1273. (in Chinese)

庄俭,于同敏,王敏杰,等. UV-LIGA技术在微型模具型腔加工中的应用研究[J]. 哈尔滨工业大学学报, 2009, 41(5):106-109. ZHUANG J, YU T M, WANG M J, et al.. Fabrication of micro-channel cavity using a modified UV-LIGA process[J]. Journal of Harbin Institute of Technology, 2009,41(5):106-109. (in Chinese)

YOON Y K, PARK J H, ALLEN M G. Multidirectional UV lithography for complex 3-D MEMS structures[J]. Journal of microelectromechanical systems, 2006, 15(5):1121-1130.

MANUEL P, ANDY E, STEFFEN W,et al.. Microstructuring of steel and hard metal using femtosecond laser pulses [J]. Physics Procedia, 2011,12:60-66.

杜立群,莫顺培,张余升,等. UV-LIGA和微细电火花加工技术组合制作三维金属微结构[J]. 光学精密工程, 2010,18(2): 363-368. DU L Q, MO SH P, ZHANG Y SH,et al.. Fabrication of 3D metal microstructure based on UV-LIGA and micro-EDM technology [J]. Opt. Precision Eng., 2010,18(2): 363-368. (in Chinese)

赵万生, 李志勇, 王振龙,等. 微三维结构电火花铣削关键技术研究[J]. 微细加工技术,2003,9:49-55. ZHAO W SH, LI ZH Y, WANG ZH L,et al.. Research on key techniques of 3D Micro-EDM milling[J]. Micro-fabrication Technology, 2003,9:49-55. (in Chinese)

王振龙,赵万生,刘光壮. 基于分层制造原理的微细电火花加工技术研究[J]. 机械工程学报,2002,2(38):22-26. WANG ZH L, ZHAO W SH, LIU G ZH. Research on laminated removal micro-EDM [J]. Chinese Journal of Mechanical Engineering, 2002,2(38):22-26. (in Chinese)

李勇,佟浩,郁鼎文,等. 三维微细电火花伺服扫描加工工艺[J]. 纳米技术与精密工程,2008,4(6):307-311. LI Y, TONG H, YU D W,et al.. Servo scanning process of 3D micro EDM[J]. Nanotechnology and Precision Engineering, 2009,4(6):307-311. (in Chinese)

贾振元, 任小涛, 刘巍,等. 大深径比微小孔快速电火花加工系统[J]. 光学精密工程,2009,12(17):3055-3061. JIA ZH Y, REN X T, LIU W,et al.. Rapid EDM systems for micro and small holes with high-aspect- ratio[J]. Opt. Precision Eng., 2009,12(17):3055-3061. (in Chinese)

XU B,WU X Y,LUO F, et al.. Research on the forming mechanism of micro-moulds based on laminated slip-welding of ultra stainless steel foils [J]. Advanced Materials Research, 2011,314-316:1818-1822.

伍晓宇,阮双琛,程蓉,等. 一种金属叠层实体制造快速成形方法:中国,200910105056.2 .2009-01-14. WU X Y, RUAN SH CH, CHENG R,et al.. A metal laminated object Manufacturing of rapid forming methods:China, 200910105056.2 .2009-01-14.(in Chinese)

徐斌,伍晓宇,罗烽,等. 0Cr18Ni9不锈钢箔的飞秒激光烧蚀[J]. 光学精密工程, 2012,20(1):45-51. XU B, WU X Y, LUO F,et al.. Ablation of 0Cr18Ni9 stainless steel films by femtosecond laser[J]. Opt. Precision Eng., 2012,20(1):45-21. (in Chinese)

浏览量

399

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

逐层微细电阻滑焊工艺制备三维微结构