数字横向剪切干涉仪相移技术

何煦; 向阳

doi:10.3788/OPE.20132109.2244

您当前的位置：

首页 >

文章列表页 >

数字横向剪切干涉仪相移技术

现代应用光学 | 更新时间：2020-08-12

- 数字横向剪切干涉仪相移技术
- Phase-shifting technology of digital lateral shearing interferometer
- 光学精密工程 2013年21卷第9期页码：2244-2251
- 作者机构：
  
  中国科学院长春光学精密机械与物理研究所，吉林长春 130033,中国
- 作者简介：
- 基金信息：
  
  科技部重大专项基金()
- DOI：10.3788/OPE.20132109.2244
  中图分类号： TH744.3
- 收稿日期：2012-06-08，
  
  修回日期：2012-09-03，
  
  网络出版日期：2013-09-30，
  
  纸质出版日期：2013-09-15
- 稿件说明：
移动端阅览
何煦向阳. 数字横向剪切干涉仪相移技术[J]. 光学精密工程, 2013,21(9): 2244-2251

HE Xu XIANG Yang. Phase-shifting technology of digital lateral shearing interferometer[J]. Editorial Office of Optics and Precision Engineering, 2013,21(9): 2244-2251
何煦向阳. 数字横向剪切干涉仪相移技术[J]. 光学精密工程, 2013,21(9): 2244-2251 DOI： 10.3788/OPE.20132109.2244.

HE Xu XIANG Yang. Phase-shifting technology of digital lateral shearing interferometer[J]. Editorial Office of Optics and Precision Engineering, 2013,21(9): 2244-2251 DOI： 10.3788/OPE.20132109.2244.

摘要

由于相移式横向剪切干涉仪相移单元的分辨率、精度等参数直接影响其测试物镜波像差的精度，本文根据相移式横向剪切干涉测试原理，设计了采用宏微复合运动模式的相移组件，该相移组件可在25 mm行程内实现纳米级的相移运动。重点分析了柔性铰链复合四杆结构微动单元初始设计参数间的数学规律，计算了铰链刚度与弱截面应力，并给出了具体的设计实例。采用有限元分析方法，对设计实例中微动单元的相移量与压电陶瓷（PZT）出力之间的作用规律进行仿真，并分析了相移精度。结果显示，PZT在促动力输出范围内可促动0.1 mm～1 nm的一维相移运动，理论精度优于3.5 nm。微动单元的开环标定测试结果表明，相移微动单元的实际精度优于5 nm。

Abstract

As the resolution

accuracy and other parameters of the phase-shifting unit in a phase-shifting lateral shearing interferometer will directly affect the test accuracy of wavefront aberration for a lithograph objective

a phase-shifting component with macro and micro compound motion modes was designed based on the principle of phase-shifting test for wavefront aberration. It could achieve a phase-shifting resolution of 3 nm in a 25 mm travel range. Moreover

the mathematical relation of initial parameters was analyzed for the micro unit with a flexure hinge composited four linkage structure. The stiffness and weak interfacial stress of the flexure hinge were calculated

and a design example was given. The finite element analysis method was used to simulate the relation between phase-shifting value and the output of piezoelectric ceramic (PZT) and to analyze the phase-shifting accuracy. The results show that the PZT can actuate one-dimensional phase-shifting motion in 0.1 mm-1 nm within its output range

and the theoretical accuracy is better than 3.5 nm. The open-loop calibration test shows that the actual accuracy of micro-motion unit in the phase-shifting component is better than 5 nm.

关键词

Keywords

references

KOTHIYAL M P, DELISLE C. Shearing interferomater for phase shifting interferometry with polarization phase shifter[J]. Applied Optics, 1985，24(24):4439-4442.[2]SONG J B, LEE Y W, LEE Y H. Simple phase-shifting method in a wedge-plate lateral-shearing interferometer [J]. Applied Optics， 2004,43(20):3989-3992.[3]ZHU Y C, ODATE S O, SUGAYA A S, et al.. Method for designing phase-calculation algorithms for two-dimensional grating phase-shifting interferometry[J]. Applied Optics, 2011, 50 (18): 2815-2822.[4]郭彤, 胡春光, 陈津平, 等. 时间相移显微干涉术用于微机电系统的尺寸表征[J]. 纳米技术与精密工程, 2008, 6(1):44-49.GUO T, HU CH G, CHEN J P, et al.. Temporal phase-shifting microscopic interferometry for geometrical characterization of MEMS devices[J]. Nanotechnology and Precision Engineering, 2008, 6(1):44-49. (in Chinese)[5]CARR P. Installation et utilisation du comparateur photoelectrique et interferentiel du Bureau international des poids et mesures[J]. Metrologia, 1966, 2(11):13-23.[6]WYANT J C, CREATH K. Recent advances in interferometric optic testing [J]. Laser Focus/Electro-Optics, 1985, 32(11):118-132.[7]BRUNING J H, HERRIOT D R, GALLAGER J E, et al.. Digital wavefront measuring interferometer for testing optical surfaces and lenses [J]. Applied Optics, 1974, 13(8): 2693-2703.[8]王利娟，刘立人，栾竹,等.相移雅满横向剪切干涉仪[J]. 中国激光,2009,30(5):1156-1159.WANG L J, LIU L R, LUAN ZH, et al.. Phase shifting Jamin lateral shearing interferometer[J]. Chinese Journal of Lasers, 2009,30(5):1156-1159. (in Chinese)[9]孔梅梅, 高志山, 陈磊, 等.基于偏振移相的环路径向剪切干涉[J]. 光学学报, 2010, 30(1):127-131.KONG M M, GAO ZH SH, CHEN L, et al.. Cyslic radia shearing interferometry based on polarization phase-shifting technique [J]. Acta Optica Sinica, 2010, 30(1):127-131. (in Chinese)[10]GOLDBERG K A, NAULLEAU P, BRESLOFF C, et al.. Extreme ultraviolet interferometry: at-wavelength testing of optics for lithography[J]. Optical Engineering, 2008, 47(2):025006-1-025006-4.[11]ZHU Y C, SUGISAKI K, OKADA M, et al.. Wavefront measurement interferometry at the operational wavelength of extreme-ultraviolet lithography [J]. Applied Optics, 2007, 46(11): 6783-6792.[12]卜巾晏, 何广平. 柔性铰链精密定位机构的设计与分析[J]. 机械设计与研究, 2009, 25(3):44-47.BU J Y, HE G P. Design and analysis of position complaint mechanisms[J]. Machine Design and Research, 2009, 25(3):44-47.[13]薛实福,李庆祥. 精密仪器设计[M].北京：清华大学出版社,1991.XUE SH F， LI Q X. Design of Precision Instrument [M]. Beijing: Tsinghua University Press, 1991. (in Chinese)[14]刘鸿文. 材料力学[M].北京：高等教育出版社,1992.LIU H W. Material Mechanics [M]. Beijing: Higher Education Press, 1992. （in Chinese)

浏览量

211

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于光谱共焦探针的Wolter-I型X射线显微镜芯轴高精度检测

非同轴并行彩色共聚焦测量系统表面倾斜角度误差分析及校正

爆炸激波管出口流场特征的纹影诊断与分析

反射镜面辅助的航空机匣三维变形多视角测量

斜视场弱相关散斑图像的离散化匹配