基于机构条件数的30m望远镜三镜Stewart平台

张景旭; 安其昌; 李剑锋; 杨飞

doi:10.3788/OPE.20142204.0890

您当前的位置：

首页 >

文章列表页 >

基于机构条件数的30m望远镜三镜Stewart平台

微纳技术与精密机械 | 更新时间：2020-08-13

- 基于机构条件数的30m望远镜三镜Stewart平台
- Third mirror Stewart platform of TMT based on mechanism condition number
- 光学精密工程 2014年22卷第4期页码：890-896
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所,吉林长春,中国,130033
  2. 中国科学院大学北京,中国,100049
- 作者简介：
- 基金信息：
  
  中国科学院三期创新工程重大专项资助项目()
- DOI：10.3788/OPE.20142204.0890
  中图分类号： TH703;TH743
- 收稿日期：2013-11-07，
  
  修回日期：2013-01-07，
  
  纸质出版日期：2014-04-25
- 稿件说明：
移动端阅览
张景旭, 安其昌, 李剑锋等. 基于机构条件数的30m望远镜三镜Stewart平台[J]. 光学精密工程, 2014,22(4): 890-896

ZHANG Jing-xu, AN Qi-chang, LI Jian-feng etc. Third mirror Stewart platform of TMT based on mechanism condition number[J]. Editorial Office of Optics and Precision Engineering, 2014,22(4): 890-896
张景旭, 安其昌, 李剑锋等. 基于机构条件数的30m望远镜三镜Stewart平台[J]. 光学精密工程, 2014,22(4): 890-896 DOI： 10.3788/OPE.20142204.0890.

ZHANG Jing-xu, AN Qi-chang, LI Jian-feng etc. Third mirror Stewart platform of TMT based on mechanism condition number[J]. Editorial Office of Optics and Precision Engineering, 2014,22(4): 890-896 DOI： 10.3788/OPE.20142204.0890.

摘要

从误差传递的角度研究了30 m望远镜（TMT）三镜大型Stewart平台的转动精度。首先，利用奇异值分析Stewart平台速度雅克比矩阵，得出机构条件数与支腿伸长量的关系。利用条件数与系统误差传递系数的关系推导出TMT三镜特殊运动形式下支腿伸长量误差与平台姿态误差的关系，并使用MATLAB优化平台结构参数得出一组优化解。然后，利用ADAMS对之前的理论推导进行仿真验证。最后，利用已知误差传递模型结合精度实验数据进行实验，辨识得出Stewart支腿伸长误差为均匀分布、动平台转动误差向量模为双峰分布。利用MATLAB进行模拟，模拟结果显示：假设支腿伸长误差为0到1之间均匀分布，动平台转动误差向量模的期望会由优化前的5.345 4×10

-4

变为优化后的4.272 1×10

-4

，优化量约为20%；转动误差分布的两个肩峰相互靠拢且向0点移动。

Abstract

The rotation accuracy of large Stewart platform of a three mirror system in a 30 m telescopy was explored based on the error transfer. Firstly

the singular value method was used to analyze the Stewart platform velocity Jacob matrix

and to obtain the relationship between mechanism condition number and leg elongation. Then

using condition number and system error transfer function

the relationship between the leg elongation error and the platform attitude error was discussed in TMT special kinematical forms

and a group of optimal solution was given out by the MATLAB optimization. After using the ADAMS to validate the theoretical derivation

the known error transfer model combined with precision experiment was used to identify the leg elongation error for evenly distribution and the mobile platform rotation error for bimodal distribution. The MATLAB simulation indicates when the leg elongation error is distributed from 0 to 1 evenly

the expectation of mobile platform rotation error vector norm has reduced from 5.345 4×10

-4

to 4.272 1×10

-4

with optimizing quantity by 20%. It concludes that the error distributions of the two shoulder peaks are close to each other and move to 0 point integratively.

关键词

Keywords

references

王富国, 杨飞, 赵宏超, 等. TMT望远镜三镜系统的研究进展[J]. 中国光学, 2013, 10(6):643-651. WANG F G, YANG F, ZHAO H CH, et al. Progress in TMT M3 system[J]. Chinese Optics. 2013, 10(6):643-651.(in Chinese)

TMT Group. Design Requirements Document for Tertiary Mirror System (M3S) [Z]. TMT.OPT.DRD.07.006.REL29, 2012.

张景旭. 地基大口径望远镜系统结构技术综述[J]. 中国光学, 2012, 5(4):327-336. ZHANG J X. Overview of structure of technologies of large aperture ground based telescope[J].Chinese Optics, 2012, 5(4):327-336.(in Chinese)

程景全. 天文望远镜原理和设计[M]. 北京:中国科学技术出版社, 2003. CHENG J Q. Principles of Astronomical Telescope Design[M]. Beijing:China Science & Technology Press, 2003.(in Chinese)

李维嘉. Stewart运动平台的雅克比矩阵条件数的研究[J]. 华中科技大学学报, 1997, 25(11):33-35. LI W J. Study on the condition number of Jacobian matrix of Stewart platforms[J]. Journal of Huazhong University of Science and Technology, 1997, 25(11):33-35. (in Chinese)

EI-KHASAWNEH B S, FERREIRA P M. Computation of stiffness and stiffness bounds for parallel link manipulators[J]. International Journal of Machine Tools & Manufacture, 1999, 39 (2):321-342.

黄真, 孔令富, 方跃法. 并联机器人机构学理论及控制[M]. 北京:机械工业出版社, 1997. HUANG ZH, KONG L F, FANG Y F. Mechanism Theory and Control of Parallel Manipulators[M]. Beijing:China Machine Press, 1997. (in Chinese)

徐刚, 杨世模. Gough-Stewart平台机构的普适工作空间及其几何求解[J]. 光学精密工程, 2008, 16(4):257-264 XU G, YANG SH M. A kind of workspace with universal characteristics of Gough-Stewart manipulator and its analytical resolution[J]. Opt. Precision Eng., 2008, 16(4):257-264. (in Chinese)

BELY P Y. The Design and Construction of Large Optical Telescopes [M]. Springer-Verlag, 2003.

王槐, 代霜, 张景旭. 大型地平式望远镜的方位轴系支撑结构[J]. 光学精密工程, 2012, 20(7):1509-1516. WANG H, DAI SH, ZHANG J X. Azimuth shafting bearing sturcture in a large alt-azimuth telescope[J]. Opt.Precision Eng., 2012, 20(7):1509-1516.(in Chinese)

张丽敏, 张斌, 杨飞. 主动光学系统力促动器得设计和测试[J]. 光学精密工程, 2012, 20(1):38-44. ZHANG L M, ZHANG B, YANG F, et al. Design and test of force actuator in active optical system[J]. Opt.Precision Eng., 2012, 20(1):38-44.(in Chinese)

浏览量

447

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于Stewart平台的有效载荷低阶模态振动抑制

高带宽两自由度并联柔顺精密定位平台的优化设计与实验

2-DOF并联行程放大机构结构参数优化

二级杠杆式微牛级微力发生机构

基于混合灵敏度的空间望远镜次镜调整机构鲁棒控制