皮卫星及其星箭分离机构的热-结构耦合与间隙设计

谢长雄; 徐月同; 夏晨晖; 陈子辰; 傅建中

doi:10.3788/OPE.20142207.1800

您当前的位置：

首页 >

文章列表页 >

皮卫星及其星箭分离机构的热-结构耦合与间隙设计

微纳技术与精密机械 | 更新时间：2020-08-13

- 皮卫星及其星箭分离机构的热-结构耦合与间隙设计
- Design of clearance fit between pico-satellite and its separation mechanism based on thermal-structure coupling
- 光学精密工程 2014年22卷第7期页码：1800-1807
- 作者机构：
  
  1. 浙江大学机械工程学系,浙江杭州,310027
  2. 衢州学院机械工程学院,浙江衢州,324000
- 作者简介：
- 基金信息：
  
  中国博士后科学基金资助项目（No.20080431306）();中国博士后科学基金特别资助项目（No.20081458）()
- DOI：10.3788/OPE.20142207.1800
  中图分类号： V474
- 收稿日期：2013-12-20，
  
  修回日期：2014-02-01，
  
  纸质出版日期：2014-07-25
- 稿件说明：
移动端阅览
谢长雄, 徐月同, 夏晨晖等. 皮卫星及其星箭分离机构的热-结构耦合与间隙设计[J]. 光学精密工程, 2014,22(7): 1800-1807

XIE Chang-xiong, XU Yue-tong, XIA Chen-hui etc. Design of clearance fit between pico-satellite and its separation mechanism based on thermal-structure coupling[J]. Editorial Office of Optics and Precision Engineering, 2014,22(7): 1800-1807
谢长雄, 徐月同, 夏晨晖等. 皮卫星及其星箭分离机构的热-结构耦合与间隙设计[J]. 光学精密工程, 2014,22(7): 1800-1807 DOI： 10.3788/OPE.20142207.1800.

XIE Chang-xiong, XU Yue-tong, XIA Chen-hui etc. Design of clearance fit between pico-satellite and its separation mechanism based on thermal-structure coupling[J]. Editorial Office of Optics and Precision Engineering, 2014,22(7): 1800-1807 DOI： 10.3788/OPE.20142207.1800.

摘要

对皮卫星与星箭分离机构进行了热结构耦合分析，以便合理地设计皮卫星与导轨面间的配合间隙，确保皮卫星安全可靠分离。在充分考虑皮卫星发射过程中卫星、地球、太阳三者几何关系的基础上，计算了皮卫星及其星箭分离机构在卫星发射过程中所吸收的外热流；通过有限元分析求解了卫星发射过程中的温度场和热变形情况。基于上述工作，设计了皮卫星与导轨间的配合间隙。分析结果显示：受冷黑环境和传导热流影响，卫星与导轨背阴面变形较大，但皮卫星外壳和导轨面总体并未发生大的扭曲形变；在600 N和300 N预紧力作用下，皮卫星与导轨面间的配合间隙最大变化量分别为62.3 m和63 m。根据分析结果合理选择了配合公差。得到的结果表明：皮卫星及其星箭分离机构在高低温试验后能正常分离，在轨星箭分离姿态与仿真结果吻合，实验结果验证了卫星与导轨间配合间隙设计的合理性，可用于指导皮卫星星箭分离机构的结构设计和热控制设计。

Abstract

The thermal-structure coupling for a pico-satellite and its separation mechanism was analyzed to guide a rational design of the fit clearance value between the satellite and guide rail and to ensure safe and reliable satellite separation.On the basis of the geometry relations of the satellite

the earth

and the sun in the process of launching

the internal and external heat flows absorbed by the pico-satellite and its separation mechanism were analyzed.The temperature field and thermal deformation in satellite launching were obtained by finite element analysis.The clearance fit value between the satellite and guide rail was designed on the basis of above analysis.The analysis results show that the maximum deformation occurs on the shady side because of the cold dark environment and conduction heat

and the pico-satellite shell and its guide rail surface are not distorted and deformed seriously.The amount of maximum deformation is 62.3 m when the preload force is 600 N and that is 63 m when the preload force is 300 N.Based on above analysis results

the fit clearance was selected.These results demonstrate that the pico-satellite and its separation mechanism can separate normally under the high and low temperature tests.The on-orbit separation attitude is in agreement with simulation results well.All of these verify that the fit clearance between the satellite and its guide rail is reasonable and it can be used in the structural design and thermal control design of pico-satellite separation mechanisms.

关键词

Keywords

references

余文革,钟先信,李晓毅,等. 皮卫星发展展望[J]. 压电与声光,2004,26(4):289-292. YU W G,ZHONG X X,LI X Y,et al. Prospects of pico-satellite development[J]. Piezoelectrics and Acoustooptics,2004,26(4):289-292. (in Chinese)

NASON I,PING-SUARI J,TWIGGS R. Development of a family of picosatellite deployers based on the cubesat standard. Proceedings of the 2002 IEEE Aerospace Conference,Big Sky,Montana,2002:9-16.

Astro- Und Feinwerktechnik Adlershof Gmbh. Single Pico-Satellite Launcher-SPL. http://www. hellotrade. com/astro-und-feinwerktechnik-adlershof/single-pico-satellite-launcher. html.

Mike Rupprecht. Air Force Military Affiliate Radio System (MARS). http://www. dk3wn. info/sat/afu/sat_marscom. shtmlL.

蒋超,王兆魁,范丽,等. 卫星筒式偏心在轨分离动力学分析[J]. 飞行力学,2010,28(1):76-79. JIANG C,WANG ZH K,FAN L,et al. Dynamics analysis of the constrained and centroid Biased on-orbit satellite separation[J]. Flight Dynamics,2010,28(1):76-79. (in Chinese)

沈晓凤,肖余之,康志宇. 小卫星偏心分离动力学仿真模型的建立与验证[J]. 飞行力学,2012,30(3):258-262. SHEN X F,XIAO Y ZH,KANG ZH Y. Establishment and validation on dynamics simulation model of separation of eccentric sub-satellite[J]. Flight Dynamics,2012,30(3):258-262. (in Chinese)

黄本诚,童靖宇. 空间环境工程学[M] 北京:中国科学技术出版社,2010. HUANG B CH,TONG J Y. Space Environment Engineering[M]. Beijing:China Science and Technology Press,2010. (in Chinese)

韩旭,马军,王忠素,等. 测绘相机在轨空间交会角变化的计算[J]. 光学精密工程,2011,19(12):2862-2869. HAN X,MA J,WANG ZH S,et al. Calculationof change of space intersection angle for mappingcamera[J]. Opt. Precision Eng. ,2011,19(12):2862-2869. (in Chinese)

吴小霞,等. 大口径SiC轻量化主镜热变形得定标[J]. 光学精密工程,2012,20(6) :1243-1249. WU X X,et al. Calibration of thermal distortion for large aperture SiC lightweight mirror[J]. Opt. Precision Eng. ,2012,20(6) :1243-1249. (in Chinese)

许杰,蒋山平,杨林华,等. 卫星结构件常压热变形的数字摄影测量[J]. 光学精密工程,2012,20(12):2667-2673. XU J,JIANG SH P,YANG L H,et al. Digital photogrammetry for thermal deformation of satellite structures in normal environment[J]. Opt. Precision Eng. ,2012,20(12):2667-2673. (in Chinese)

FANG H F,LOU M,HUANG J,et al. Thermal distortion analysis of a three-meter inflatable reflect array antenna. AIAA Paper 2003-1650,American Institute of Aeronautics and Astronautics. New York,2003.

ISHIMURA K,HIGUCHI K. Coupling between structural deformation and attitude motion of large planar space structures suspended by multi-tethers[J]. Acta Astronautica,2007,60(8):691-710.

徐向华,程雪涛,梁新刚. 圆形太阳同步轨道卫星的空间热环境分析[J]. 宇航学报,2012,33(3):399-404. XU X H,CHENG X T,LIANG X G. Analysis on space thermal environment for circular sun·synchronous orbit[J]. Journal of Astronautic,2012,33(3):399-404. (in Chinese)

闵桂荣. 卫星热控制技术[M]. 北京:宇航出版社,1991. MIN G R. Satellite Thermal Control Technology[M]. Beijing:China Astronautic Publishing House,1991. (in Chinese)

XU M,JIANG S Y. An improved thermal model for machine tool bearings[J]. International Journa1 of Machine Tools& Manufacture,2007,47:53-62.

浏览量

119

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

光学遥感器光机结构热变形的高精度测量

空间相机重复展收机构薄膜防护罩设计及分析

基于蜂窝板铺层技术的某光学卫星有效载荷安装面的热变形优化

月基望远镜反射镜转台的热-结构耦合分析及验证

基于热力转换机理仿真圆柱体零件形体边界约束的热变形