1m口径红外测量系统的辐射定标

李宁; 张云峰; 刘春香; 曹立华; 郭立红

doi:10.3788/OPE.20142208.2054

您当前的位置：

首页 >

文章列表页 >

1m口径红外测量系统的辐射定标

现代应用光学 | 更新时间：2020-08-13

- 1m口径红外测量系统的辐射定标
- Calibration of 1 m aperture infrared theodolite
- 光学精密工程 2014年22卷第8期页码：2054-2060
- 作者机构：
  
  中国科学院长春光学精密机械与物理研究所,吉林长春,中国,130033
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目（No.61036015）()
- DOI：10.3788/OPE.20142208.2054
  中图分类号： TH703;TN216
- 收稿日期：2013-08-05，
  
  修回日期：2013-10-07，
  
  纸质出版日期：2014-08-25
- 稿件说明：
移动端阅览
李宁, 张云峰, 刘春香等. 1m口径红外测量系统的辐射定标[J]. 光学精密工程, 2014,22(8): 2054-2060

LI Ning, ZHANG Yun-feng, LIU Chun-xiang etc. Calibration of 1 m aperture infrared theodolite[J]. Editorial Office of Optics and Precision Engineering, 2014,22(8): 2054-2060
李宁, 张云峰, 刘春香等. 1m口径红外测量系统的辐射定标[J]. 光学精密工程, 2014,22(8): 2054-2060 DOI： 10.3788/OPE.20142208.2054.

LI Ning, ZHANG Yun-feng, LIU Chun-xiang etc. Calibration of 1 m aperture infrared theodolite[J]. Editorial Office of Optics and Precision Engineering, 2014,22(8): 2054-2060 DOI： 10.3788/OPE.20142208.2054.

摘要

为了测量空中目标的红外辐射特性，设计了一套1 m口径红外测量系统的辐射定标装置。给出了红外测量系统辐射定标的数学模型，以腔型黑体和平行光管组合作为标准辐射源，建立了1 m口径红外测量系统的辐射定标系统。考虑该红外测量系统的光谱响应具有选择性，若采用传统辐射定标方法易产生原理误差，故提出了一种基于光栅单色仪和标准辐射计的相对光谱标定方法。给出了该标定方法的数学模型并进行了相对光谱标定。最后，在外场以黑体作为模拟目标进行了辐射特性测量实验。结果表明，应用本文提出的辐射定标方法，1 m口径红外测量系统的辐射特性测量误差最大值为9.5%，比传统方法平均减少了约8.7%，可满足实际项目指标要求，非常适合外场辐射定标的应用。

Abstract

To measure infrared radiation characteristics of air targets

the calibration system for a 1 m aperture infrared measurement system was designed. A mathematic model of calibration for the infrared measurement system was given and a radiometric calibration system was established by combinations of a cavity blackbody and a collimator as the standard radiation source. Because the spectral response of the infrared measuring system is selective

the calibration principle based on conventional radiometric calibration method has theoretical errors and reduces the precision of radiometric calibration. To solve the problem

a relative spectral calibration method based on a monochromator and a standard radiometer was proposed. The mathematical model was given and a relative spectral calibration was performed. Finally

the experiments on radiation characteristic measurement were performed in the field by using the blackbody as a simulated target. The results show that the measurement max error from the 1 m aperture infrared radiation characteristic measurement system is 9.5% and improves by an average of 8.7% as compared with that of the conventional method. These show that the proposed method meets the requirements of practical applications and is suitable for the radiometric calibration in the out-fields.

关键词

Keywords

references

杨林华,肖庆生,蒋山平. 红外遥感器辐射定标技术概述[J]. 航天器环境工程,2013,30(1):34-39. YANG L H,XIAO Q SH,JIANG SH P.An overview of the radiometric calibration facility for infrared sensors[J].Spacecraft Environment Engineering, 2013,30(1):34-39. (in Chinese)

张鑫,贾宏光. 大相对孔径红外消热差物镜设计[J]. 中国光学,2011,4(4):374-379. ZHANG X,JIA H G. Optical design of infrared athermalized objective with large relative aperture[J]. Chinese Optics. 2011,4(4):374-379.(in Chinese)

李宁, 杨词银, 曹立华, 等. 3~5 μm红外焦平面阵列的辐射定标[J]. 光学精密工程, 2011, 19(10): 2319-2325. LI N, YANG C Y, CAO L H, et al.. Radiance calibration for 3~5 μm infrared focal plane array[J].Opt. Precision Eng., 2011, 19(10): 2319-2325. (in Chinese)

唐嘉,高昕. 靶场红外辐射特性测量系统标定方法研究 [J]. 红外与激光工程,2006,35(S1):266-270. TANG J,GAO X.Calibration method for infrared radiation characteristics measuring system of test range[J]. Infrared and Laser Engineering, 2006, 35(S1):266-270. (in Chinese)

CHANG P, LI CH R, LI T M. Kinematic calibration and forecast error compensation of a 2-DOF planar parallel manipulator[J]. Chinese Journal of Mechanical Engineering, 2011,24(6):992-998.

修吉宏,黄浦,李军,等. 大面阵彩色CCD航测相机的辐射定标[J]. 光学精密工程,2012,20(6):1365-1373. XIU J H,HUANG P,LI J,et al..Radiometric calibration of large area array color CCD aerial mapping camera[J]. Opt. Precision Eng., 2012,20(6):1365-1373. (in Chinese)

王锐, 王淑荣,郭劲,等. 高精度紫外标准探测器的定标[J]. 光学精密工程, 2012, 20(8): 1696-1703. WANG R, WANG SH R,GUO J,et al.. Calibration of high accuracy UV standard detector [J]. Opt. Precision Eng., 2012, 20(8): 1696-1703. (in Chinese)

YU L, LIN G Y, CHEN B. Study on the absolute spectral irradiation calibration method for far ultraviolet spectrometer in remote sensing[J]. Spectroscopy and Spectral Analysis, 2013,33(1):246-249.

张晓龙,刘英,孙强. 高精度非制冷长波红外热像仪的辐射定标[J]. 中国光学,2012,5(3):235-241. ZHANG X L, LIU Y, SUN Q. Radiometric calibration of uncooled long-wave infrared thermal imager with high-precison[J]. Chinese Optics, 2012,5(3):235-241.(in Chinese)

曹立华, 李宁, 杨词银, 等. 3~5 μm红外探测器的辐射定标[J]. 红外与激光工程, 2012, 41(4):858-864. CAO L H, LI N, YANG C Y, et al.. Radiance calibration for 3-5 μm infrared detector[J]. Infrared and Laser Engineering, 2012, 41(4):858-864. (in Chinese)

杨词银,张建萍,曹立华. 基于实时标校的目标红外辐射测量新方法[J]. 红外与毫米波学报,2011,30(3):284-288. YANG C Y, ZHANG J P, CAO L H. Infrared radiation measurement based on real-time correction[J]. J. Infrared Millim. Wave,2011, 30(3):284-288. (in Chinese)

浏览量

315

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

应用内外定标修正实现红外测量系统辐射定标

InGaAs光电阴极的Cs/NF₃激活

天问一号高分相机成像噪声分析与抑制

医用显微成像光谱仪的光谱定标技术

极紫外波段空间相机的辐射定标