浏览全部资源
扫码关注微信
1. 中国工程物理研究院 激光聚变研究中心,四川 绵阳,621900
2. 中国科学院 西安光学精密机械研究所,陕西 西安,710119
收稿日期:2014-03-13,
修回日期:2014-04-07,
纸质出版日期:2014-12-25
移动端阅览
闫亚东, 何俊华, 王峰等. 全孔径背向散射诊断光学系统[J]. 光学精密工程, 2014,22(12): 3191-3198
YAN Ya-dong, HE Jun-hua, WANG Feng etc. Optical system for full aperture backscatter diagnosis[J]. Editorial Office of Optics and Precision Engineering, 2014,22(12): 3191-3198
闫亚东, 何俊华, 王峰等. 全孔径背向散射诊断光学系统[J]. 光学精密工程, 2014,22(12): 3191-3198 DOI: 10.3788/OPE.20142212.3191.
YAN Ya-dong, HE Jun-hua, WANG Feng etc. Optical system for full aperture backscatter diagnosis[J]. Editorial Office of Optics and Precision Engineering, 2014,22(12): 3191-3198 DOI: 10.3788/OPE.20142212.3191.
基于新的激光聚变驱动装置的需要
设计了全孔径背向散射诊断光学系统并介绍了光学设计中涉及的若干关键技术.采用低反射率的楔形反射镜衰减背向散射光能量
降低后继元件对光学薄膜损伤阈值的要求.通过缩束镜缩小光束口径
减小光学元件尺寸;同时采取折叠光路结构来缩小系统体积.对空间滤波器和光学滤片进行组合
屏蔽了打靶倍频光干扰及不同散射类型的相互串扰.采用光学白板对色散严重的背向散射光进行漫反射匀化
使光谱测量系统获得完整的光谱信息.最后
选取抛物面为空间分布成像目标面
通过分析空间分布成像光束的结构设计了成像镜头.设计的诊断光学系统具有散射时间测量、光谱测量、空间分布成像、能量测量等功能
光学测量模块尺寸为1.9 m×0.9 m×1.5 m.该全孔径背向散射诊断光学系统在新的激光聚变驱动装置中具有潜在的应用价值.
An optical system for full aperture backscatter diagnose was designed for a novel inertial confinement fusion facility. Several key technologies about optical design were discussed. A wedge mirror with low reflectance was used to attenuate the backscatter lights before diagnosis
so the films of optical elements in the diagnostic system were survived after many shots. A telescope optical system was used to reduce the sizes of the beam as well as the sizes of the optical elements
meanwhile the optical path was folded several times by mirrors to shrink the volume of the whole system. The space filter
dichroic filter
optical filters and colored glasses were combined to simultaneously eliminate the stray light. Moreover
a scatter plate was taken to average the signals to ensure the fiber coupler to obtain needed signals including all wavelengths studied. Based on the analysis of imaging beam structures
a lens was designed for the imaging of parabolic mirror
and a camera was used to record the space distribution of scattered lights on the surface of parabolic mirror. The diagnosis system was designed to provide measurements for scattering time
scattering spectrum
near-field imaging
and scattered energy and its whole sizes are 1.9 m×0.9 m×1.5 m. The full aperture backscatter system designed in this paper has potential applications to the new inertial confinement fusion facility.
许琰,赖东显,冯庭桂,等. 黑腔诊断堵口现象的数值模拟[J]. 强激光与粒子束,2001,13(2):173-176. XU Y, LAI D X, FENG T G, et al.. A model to study the transmissivity of diagnostic holes on hohlraum[J]. High Power Laser and Particle Beams, 2001,13(2):173-176. (in Chinese)
郑志坚,陈家斌,丁永坤,等. 强激光斜入射半腔靶能量注入率测量[J]. 强激光与粒子束,2000,12(1):43-47. ZHENG ZH J, CHEN J B, DING Y K, et al.. The laser energy injection efficiency measurement for the half-cavity target[J]. High Power Laser and Particle Beams, 2000,12(1):43-47. (in Chinese)
况龙钰,王传珂,王哲斌,等. 527 nm激光辐照盘受激布里渊散射光角分布[J]. 强激光与粒子束,2007,19(3):413-416. KUANG L Y, WANG CH K, WANG ZH B, et al.. Angular distribution of stimulated Brillouin scattering from interaction of 527 nm laser with Au and Al disk targets[J]. High Power Laser and Particle Beams, 2007,19(3):413-416. (in Chinese)
KIRKWOOD R K,MCCARVILLE T,FROULA D H, et al.. Calibration of initial measurements from the full aperture backscatter system on the National Ignition Facility[J]. Rev. Sci. Instrum., 2004, 75(10):4174-4176.
BOWER D E, MCCARVILLE T J,ALVAREZ S S, et al.. Full aperture backscatter station measurement system on the National Ignition Facility[J]. Rev. Sci. Instrum., 2004, 75(10):4177-4179.
MOODY J D,DATTE P,KRAUTER K, et al.. Backscatter measurements for NIF ignition targets[J]. Rev. Sci. Instrum., 2010, 81(10): 921.1-921.6.
王传珂, 蒋小华, 刘慎业, 等. 2 ns,351 nm激光黑腔靶受激Raman散射实验研究[J]. 强激光与粒子束,2006,18(7):1113-1116. WANG CH K, JIANG X H, LIU SH Y,et al.. Stimulated Raman scattering from interaction of 2 ns, 351 nm laser with hohlraum[J]. High Power Laser and Particle Beams, 2006,18(7):1113-1116. (in Chinese)
李志超,张小丁,杨冬,等. 神光Ⅲ原型受激拉曼与受激布里渊散射份额测量[J]. 强激光与粒子束,2010,22(8):1891-1895. WANG CH K, ZHANG X D, YANG D,et al.. Energy fraction measurements of stimulated Brillouin scattering and stimulated Raman scattering on Shenguang Ⅲ prototype laser facility[J]. High Power Laser and Particle Beams, 2010,22(8):1891-1895. (in Chinese)
赵学峰,王传珂,况龙钰,等. 环状PIN阵列测量全口径背向散射光空间分布的实验研究[J]. 核聚变与等离子体物理,2011,31(1):43-47. ZHAO X F, WANG CH K, KUANG L Y,et al.. The experimental method of measurement for spatial distribution of full aperture backscatter light by circular PIN-array[J].Nuclear Fusion and Plasma Physics, 2011,31(1):43-47. (in Chinese)
焦春晔,王峰,蒋小华,等. 神光Ⅲ原型的全孔径背向散射诊断系统[J]. 核电子学与探测技术,2011,31(3):306-311. JIAO CH Y, WANG F, JIANG X H, et al.. Full aperture backscatter diagnosis system on Shenguang prototype laser facility[J]. Nuclear Electronics & Detection Technology, 2011,31(3):306-311. (in Chinese)
杨正华. 近背向散射与全孔径背向散射测量系统的研制[D]. 重庆:重庆大学,2008. YANG ZH H. The study of near backscatter and full-aperture backscatter measurement system[D]. Chongqing: Chongqing university, 2008. (in Chinese)
王传珂, 蒋小华, 王哲斌, 等. 神光Ⅱ激光装置的全口径背向散射测量系统[J]. 强激光与粒子束,2010,22(8):1896-1900. WANG CH K, JIANG X H, WANG ZH B,et al.. Full-aperture backscatter station on Shenguang-Ⅱ laser facility[J]. High Power Laser and Particle Beams, 2010,22(8):1896-1900. (in Chinese)
魏慧月,彭晓世,徐涛,等. 神光Ⅲ原型装置的全孔径背向散射诊断技术[J]. 强激光与粒子束,2012,24(12):2273-2277. WEI H Y, PENG X SH, XU T,et al.. Full aperture backscatter diagnostic system on Shenguang-Ⅲprototype laser facility[J]. High Power Laser and Particle Beams, 2012,24(12):2273-2277. (in Chinese)
王美聪,陈刚,黄湛,等. 神光Ⅲ主机装置编组站稳定性设计[J]. 光学 精密工程,2011,19(11):2664-2670. WANG M C, CHEN G, HUANG ZH, et al.. Stability design of switchyard in SG-Ⅲ facility[J]. Opt. Precision Eng., 2011,19(11):2664-2670.(in Chinese)
宋家宝,李国平. 大型光学望远镜扇形子镜拼接设计及仿真分析[J]. 天文研究与技术,2010,7(4):355-361. SONG J B, LI G P. Design and simulation of splicing of sector-shaped segments of a large optical telescope[J]. Astronomical Research & Technology, 2010,7(4):355-361. (in Chinese)
张容,韩建军,臧友竹,等. 大型太阳模拟器拼接准直镜技术[J]. 航天器环境工程,2005,22(1):50-56. ZHANG R, HAN J J, ZANG Y ZH, et al.. Technology of segmented collimating mirror in a large solar simulator[J]. Spacecraft Environment Engineering, 2005,22(1):50-56. (in Chinese)
杨秉新. 空间相机用碳化硅(SiC)反射镜的研究[J]. 航天返回与遥感,2003,24(1):15-18. YANG B X. Research of SiC reflection mirror for space camera[J]. Spacecraft Recovery & Remote Sensing. 2003,24(1):15-18.(in Chinese)
王贵林,李圣怡,戴一帆. 空间相机SiC反射镜的制作[J]. 机械工程材料,2002,26(8):37-38. WANG G L, LI SH Y, DAI Y F. Fabrication of SiC mirrors applied to space camera[J]. Materials for Mechanical Engineering, 2002,26(8):37-38.(in Chinese)
张学军,李志来,张忠玉. 基于SiC材料的空间相机非球面反射镜结构设计[J]. 红外与激光工程,2007,36(5):577-582. ZHANG X J, LI ZH L, ZHANG ZH Y. Space telecope aspherical mirror structure design based on SiC material[J]. Infrared and Laser Engineering, 2007,36(5):577-582. (in Chinese)
陈伟,丁亚林,惠守文,等. 碳化硅扫描反射镜支撑结构设计[J]. 中国光学,2012,5(2):161-166. CHEN W, DING Y L, HUI SH W, et al.. Design of kinematic mount for SiC scanning reflective mirror[J]. Chinese Optics, 2012,5(2):161-166.(in Chinese)
徐新行,王兵,乔健,等. 快反系统中平面反射镜的轻量化设计[J]. 中国光学,2012,5(1):35-41. XU X H, WANG B, QIAO J, et al.. Lightweight design of mirror in fast-steering mirror system[J]. Chinese Optics, 2012,5(1):35-41.(in Chinese)
0
浏览量
381
下载量
3
CSCD
关联资源
相关文章
相关作者
相关机构