浏览全部资源
扫码关注微信
上海大学 机电工程与自动化学院 智能机械与系统实验室 上海,200072
收稿日期:2014-02-21,
修回日期:2014-04-04,
纸质出版日期:2014-12-25
移动端阅览
沈林勇, 黄晨晨, 钱晋武等. 支链偏置的并联机构工作空间分析及尺度综合[J]. 光学精密工程, 2014,22(12): 3310-3317
SHEN Lin-yong, HUANG Chen-chen, QIAN Jin-wu etc. Workspace analysis and dimensional synthesis on a delta parallel mechanism with branch chain offset[J]. Editorial Office of Optics and Precision Engineering, 2014,22(12): 3310-3317
沈林勇, 黄晨晨, 钱晋武等. 支链偏置的并联机构工作空间分析及尺度综合[J]. 光学精密工程, 2014,22(12): 3310-3317 DOI: 10.3788/OPE.20142212.3310.
SHEN Lin-yong, HUANG Chen-chen, QIAN Jin-wu etc. Workspace analysis and dimensional synthesis on a delta parallel mechanism with branch chain offset[J]. Editorial Office of Optics and Precision Engineering, 2014,22(12): 3310-3317 DOI: 10.3788/OPE.20142212.3310.
以设计结构紧凑、工作空间大的力/触觉反馈器为目标
研究了Delta并联机构的运动学和工作空间特性.在改进Delta机构的基础上
引入支链机构的偏置安装角度α
利用矢量法求解了机构的位置逆解和正解
并通过算例验证了方程求解正、逆解的正确性;根据逆解公式推导出单开链子空间包络体边界方程
绘制分析了驱动杆与摆动杆长短不同时3种情况下的子空间几何形状.然后
详细讨论了α对整体工作空间和机构总体外围尺寸的影响
采用数值法得出了偏置安装角度α与工作空间最大内切球体体积的关系图、偏置角度与整体外围尺寸的关系图
并利用matlab绘制出整体空间截面图.最后
以上述最大内切球体为设计空间
结合雅克比矩阵条件数给出设计实例.验证结果表明
采用该设计方法能够满足对Delta机构的优化设计要求.
To design a force/tactile feedback device with compact construct and a larger workspace
the kinematics analysis and working space algorithm were researched based on the Delta mechanism. Based on the improved Delta mechanism
a chain offset angle alpha was introduced. Positive and inverse kinematics were established by the vector method and their correctness were verified by taking a deduced equation as an example. According to the inverse kinematics formula
the envelope body equation of single-open-chain subspace was deduced and the geometric shape of the subspace was drawn under three situations while the length of drive rod is more than or equals to or less than that of oscillating rod. Then the influence of alpha on the whole workspace and mechanism size was deeply discussed. The relations between the offset angle and the volume of the maximum inscribed sphere
the offset angle and the whole mechanism size were derived using the numerical method. Moreover
the cross section view of the space was plotted by MATLAB. Finally
the maximum inscribed sphere was taken as the design space
and a design example was given by using the Jacobin matrix condition number. The results after verifying show that the designed mechanism meets requirements of optimized design Delta mechanisms.
CLAVEL R. Device for the movement and positioning of an element in space: USA, US 4976582[P]. 1990.
CLAVEL R. Delta, a fast robot with papallel geometry[C]. Proceedings of the 18th International Symposium on Industrial Robot. 1988:91-100.
TSAI L W. Multi-degree-of-freedom mechanism for machine tools and the like: US, 5656905[P]. 1997-08-12.
TSAI L W, WALSH G C, STAMPER R E. Kinematics of a novel three DOF translational platform[C].IEEE International Conference on Robotics and Automation. Minneapolis, Minnesota: IEEE (Robotics & Automation Society)Staff, 1996: 3446-3451.
TSAI L W, JOSHI S. Kinematic analysis of 3-DOF position mechanisms for use in hybrid kinematic machines [J].Journal of Mechanical Design, 2002, 124: 245-253.
王铁军,刘全凯,郝长中. 六自由度并联机器人工作空间分析[J]. 沈阳工业学院学报,1999,18(3):21-25. WANG T J, LIU Q K, HAO CH ZH. Workspace analysis for a six dofs parallel manipulator[J]. Journal of Shenyang Institute of technology, 1999, 18(3):21-25. (in Chinese)
高秀兰,鲁开讲,王娟平. Delta并联机构工作空间解析及尺度综合[J]. 农业机械学报,2008,39(5): 146-149. GAO X L, LU K J,WANG J P. Workspace resolution and dimensional synthesis on delta parallel mechanism [J]. Transactions of the Chinese Society for Agricultural Machinery, 2008, 39(5):146-149. (in Chinese)
梁香宁. Delta机器人运动学建模及仿真[D]. 山西:太原理工大学,2008,5. LIANG X N. Kinemeatic Search and Simulation of Delta Robot[D]. Shanxi: University of Taiyuan for Science and Technology, 2008. (in Chinese)
王霄,韩亚锋,林跃强,等. Delta型并联运动激光切割机床的工作空间分析[J]. 农业机械学报,2007,38(1):154-157. WANG X, HAN Y F, LIN Y Q, et al.. Workspace analysis of a laser cutting machine tool based on delta parallel structure [J]. Transactions of the Chinese Society for Agricultural Machinery, 2007,38(1):154-157. (in Chinese)
程刚,葛世荣,蒋世磊. 3-UCR 并联机构的瞬态运动学研究[J]. 光学 精密工程,2008,16(1): 108-113. CHENG G, GE SH R, JIANG SH L. Research on transient kinematic characteristics of 3-UCR parallel robot [J]. Opt. Precision Eng., 2008,16(1): 108-113.
赵杰,朱延河,蔡鹤皋. Delta型并联机器人运动学正解几何解法[J]. 哈尔滨工业大学学报,2003,35(1):25-27. ZHAO J, ZHU Y H, CAI H G. Geometric solution for direct kinematics of Delta parallel robot[J]. Journal of Harbin Institute of Technology, 2003, 35(1):25-27. (in Chinese)
刘永均,张静,李柏林. 基于条件数的3-RRS并联机器人运动性能优化[J]. 机械设计与研究,2008,06:32-34. LIU Y J, ZHANG J, LI B L. Parameter optimization of the 3-RRS paralled robot based on the condition index[J]. Machine Design and Research, 2008,06:32-34.
GOSSELIN C, ANGELES J. A global performance index for the kinematic optimization of robotic manipulators[J]. Transaction of the ASME, Journal of Mechanical Design, 1991,113(3):220-226.
张彦斌,王慧萍,吴鑫. 完全各向同性3自由度平面并联机构的型综合[J]. 光学 精密工程,2012,20(3): 579-586. ZHANG Y B, WANG H P, WU X. Structure synthesis of fully-isotropic 3-DoF planar parallel manipulators [J]. Opt. Precision Eng., 2012,20(3): 579-586.
石志新,罗玉峰,陈红亮,等. 机器人机构的全域性能指标研究[J]. 机器人,2005,27(5): 420-422. SHI ZH X, LUO Y F, CHEN H L, et al.. On global performance indices of robotic mechanisms[J]. Robot, 2005, 27(5): 420-422. (in Chinese)
0
浏览量
465
下载量
4
CSCD
关联资源
相关文章
相关作者
相关机构