离子束抛光高陡度离轴非球面的去除函数修正

唐瓦; 邓伟杰; 李锐钢; 郑立功; 张学军

doi:10.3788/OPE.20152306.1572

您当前的位置：

首页 >

文章列表页 >

离子束抛光高陡度离轴非球面的去除函数修正

现代应用光学 | 更新时间：2020-08-13

- 离子束抛光高陡度离轴非球面的去除函数修正
- Correction of removal function of ion beam figuring highly steep off-axis asphere
- 光学精密工程 2015年23卷第6期页码：1572-1579
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所,吉林长春,中国,130033
  2. 中国科学院大学北京,中国,100049
- 作者简介：
- 基金信息：
  
  国家973重点基础研究发展计划资助项目(No.2011CB013205)();国家自然科学基金重点项目(No.61036015)()
- DOI：10.3788/OPE.20152306.1572
  中图分类号： TQ171.6+8
- 收稿日期：2014-05-08，
  
  修回日期：2014-07-01，
  
  纸质出版日期：2015-06-25
- 稿件说明：
移动端阅览
唐瓦, 邓伟杰, 李锐钢等. 离子束抛光高陡度离轴非球面的去除函数修正[J]. 光学精密工程, 2015,23(6): 1572-1579

TANG Wa, DENG Wei-jie, LI Rui-gang etc. Correction of removal function of ion beam figuring highly steep off-axis asphere[J]. Editorial Office of Optics and Precision Engineering, 2015,23(6): 1572-1579
唐瓦, 邓伟杰, 李锐钢等. 离子束抛光高陡度离轴非球面的去除函数修正[J]. 光学精密工程, 2015,23(6): 1572-1579 DOI： 10.3788/OPE.20152306.1572.

TANG Wa, DENG Wei-jie, LI Rui-gang etc. Correction of removal function of ion beam figuring highly steep off-axis asphere[J]. Editorial Office of Optics and Precision Engineering, 2015,23(6): 1572-1579 DOI： 10.3788/OPE.20152306.1572.

摘要

研究了三轴离子束系统抛光大口径高陡度离轴非球面过程中镜面曲率变化对离子束抛光去除函数的影响.提出了利用修正矩阵修正各驻留点处的去除函数信息

进而实现对高陡度离轴非球面高精度抛光的方法.该方法通过对离轴非球面进行坐标转换来降低陡度变化对去除函数的影响;基于Sigmund溅射理论分析离子束抛光非球面材料的去除率

建立离子束抛光非球面去除函数模型

计算了材料去除率在非球面各驻留点处的变化.最后

根据投影原理计算在各驻留点处去除函数的半宽

得到以驻留点矩阵为基础的去除函数修正矩阵

从而掌握每一个驻留点处的去除函数信息

然后根据计算机控制光学表面成形(CCOS)原理解得加工驻留时间分布.选取口径为900 mm×680 mm

离轴量为350 mm 的离轴体育场型非球面镜进行了抛光实验

实验显示抛光后非球面镜面形精度的RMS值由32.041 nm达到11.566 nm

收敛率达 2.77

对实际加工具有指导意义.

Abstract

The effect of curvature change of a mirror surface on the removal function of ion beam figuring was explored. A new higher precision figuring method for a highly steep off-axis asphere was proposed by using a correction matrix to calculate the removal function in different dwell points. The coordinate transformation for the off-axis asphere was used to decrease the effect of steep change on the removal function

the material removal rate of ion beam figuring asphere was analyzed based on Sigmund sputtering theory and a mathematics model of the removal function of the ion beam figuring asphere was established to calculate the variation of the material removal rate in different well points. The FWHMs (full wave and half maximum) of removal functions on different dwell points were calculated based on projection theory. Then the correction matrix for removal function was obtained based on the dwell point matrix

by which the information of removal function on every dwell points was calculated. Furthermore

the dwell time could be computed by Computer Controlled Optical Surfacing(CCOS) theory. At last

the experiments were performed by combing with a simulation. A silicon off-axis sphere mirror with a size of 900 mm×680 mm and an off-axis magnitude of 350 mm was figured. Obtained the RMS value of profile accuracy for the off-axis asphere mirror changes from 32.041 nm to 11.566 nm and the rate of convergence is up to 2.77. The experimental result demonstrates that the correction matrix for removal function of ion beam figuring satisfies the requirement of optical fabrication.

关键词

Keywords

references

张峰. 高精度离轴凸非球面反射镜的加工及检测[J]. 光学精密工程, 2010, 18(12): 2557-2563. ZHANG F. Fabrication and testing of precise off-axis convex aspheric mirror[J].Opt. Precision Eng., 2010, 18(12): 2557-2563.(in Chinese)

DEMMLER M, ZEUNER M, LUCA A, et al.. Ion beam figuring of silicon aspheres [J].SPIE, 2011,7934: 793416-793416-6.

戴一帆, 周林, 解旭辉, 等. 离子束修形技术[J]. 应用光学, 2011, 32(4): 753. DAI Y F, ZHOU L, XIE X H, et al.. Ion beam figuring technology [J]. Journal of Applied Optics, 2011, 32(4): 753.(in Chinese)

WILSON S R, REICHER D W, MCNEIL J R. Surface figuring using neutral ion beams [C].32nd Annual Technical Symposium, International Society for Optics and Photonics, 1989: 74-81.

WILSON S R, MCNEIL J R. Neutral ion beam figuring of large optical surfaces [C].31st Annual Technical Symposium, International Society for Optics and Photonics, 1987: 320-324.

HAENSEL T, NICKEL A, SCHINDLER A. Ion beam figuring of strongly curved surfaces with a (x, y, z) linear three-axes system [C].Optical Fabrication and Testing, Optical Society of America, 2008,10(19):JWD6.

DAI Y, LIAO W, ZHOU L, et al.. Ion beam figuring of high-slope surfaces based on figure error compensation algorithm [J]. Applied Optics, 2010, 49(34): 6630-6636.

SIGMUND P. Elements of Sputtering Theory [M]. Pan Stanford Publishing, 2009:5-7.

BRADLEY R M, HARPER J M E. Theory of ripple topography induced by ion bombardment [J]. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1988, 6(4): 2390-2395.

焦长君, 李圣怡, 王登峰, 等. 离子束加工光学镜面的材料去除特性[J]. 光学精密工程, 2007, 15(10): 1250-1256. JIAO CH J, LI SH Y, WANG D F, et al.. Material removal property in ion figuring process for optical components [J]. Opt. Precision Eng., 2007, 15(10): 1250-1256.(in Chinese)

李锐钢, 郑立功, 张峰, 等. 大口径高陡度离轴非球面精磨阶段的数控加工[J]. 光学精密工程, 2007, 15(5): 633-639. LI R G, ZHENG L G, ZHANG F, et al.. Computer controlled manufacturing during fine grinding stage of highly steep off-axis asphere with large aperture[J]. Opt. Precision Eng., 2007, 15(5): 633-639.(in Chinese)

廖文林,戴一帆,周林. 离子束抛光加工矩形离轴非球面镜[J]. 国防科技大学学报,2011,23(1):100-104. LIAO W L,DAI Y F, ZHOU L. Ion beam figuring for rectangular off axis aspheric mirror [J]. Journal of National University of Defense Technology,2011,23(1):100-104.(in Chinese)

LIAO W L,DAI Y F, XIE X H, et al.. Mathematical modeling and application of removal functions during deterministic ion beam figuring of optical surfaces. Part 1: Mathematical modeling [J]. Applied Optics, 2014,53(19): 4266-4274.

周林, 戴一帆, 解旭辉, 等. 光学镜面离子束加工的可达性[J]. 光学精密工程, 2007, 15(2): 160-166. ZHOU L, DAI Y F, XIE X H, et al.. Machining reachability in ion beam figuring [J]. Opt. Precision Eng., 2007, 15(2): 160-166.(in Chinese)

浏览量

239

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

磁流变抛光系统去除函数的原点位置标定

离子束抛光去除函数计算与抛光实验

机器人抛光M-ZnS去除函数建模与工艺参数优化

多光谱硫化锌光学窗口离子束抛光工艺研究及参数优化

平面光学元件中频误差的磁流变加工控制