双工件台宏微交接系统设计及实验

吴剑威; 袁勇; 崔继文; 刘永猛; 谭久彬

doi:10.3788/OPE.20152306.1673

您当前的位置：

首页 >

文章列表页 >

双工件台宏微交接系统设计及实验

微纳技术与精密机械 | 更新时间：2020-08-13

- 双工件台宏微交接系统设计及实验
- Design and test of macro-micro coupling system for dual-stage lithography
- 光学精密工程 2015年23卷第6期页码：1673-1680
- 作者机构：
  
  哈尔滨工业大学超精密光电仪器工程研究所,黑龙江哈尔滨,150080
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目(No.51205090)();中国博士后科学基金资助项目(No.2014M551231)();黑龙江省博士后科学基金资助项目(No.LBH-Z
- DOI：10.3788/OPE.20152306.1673
  中图分类号： TN305.7
- 收稿日期：2014-11-20，
  
  修回日期：2015-01-10，
  
  纸质出版日期：2015-06-25
- 稿件说明：
移动端阅览
吴剑威, 袁勇, 崔继文等. 双工件台宏微交接系统设计及实验[J]. 光学精密工程, 2015,23(6): 1673-1680

WU Jian-wei, YUAN Yong, CUI Ji-wen etc. Design and test of macro-micro coupling system for dual-stage lithography[J]. Editorial Office of Optics and Precision Engineering, 2015,23(6): 1673-1680
吴剑威, 袁勇, 崔继文等. 双工件台宏微交接系统设计及实验[J]. 光学精密工程, 2015,23(6): 1673-1680 DOI： 10.3788/OPE.20152306.1673.

WU Jian-wei, YUAN Yong, CUI Ji-wen etc. Design and test of macro-micro coupling system for dual-stage lithography[J]. Editorial Office of Optics and Precision Engineering, 2015,23(6): 1673-1680 DOI： 10.3788/OPE.20152306.1673.

摘要

为了减少光刻机双工件台换台的时间

保证宏动系统与微动台的可靠连接

设计了一种双工件台快速宏微交接系统.基于柔性杠杆机构设计系统的快速抓卡装置以保证结构的紧凑性

并对其锁紧力进行了分析;设计的抓卡装置中的柔性机构包括柔性杠杆及下夹板回复单元

采用有限元方法对其进行了分析.设计了快速抓卡装置的充放气回路;为了保证抓卡装置锁紧时的速度和安全性

气动系统可实现抓卡装置锁紧的3个动态过程

从而完成抓紧装置的缓冲锁紧.最后

搭建了抓卡装置下夹板运动测量实验平台和锁紧力测量实验平台.实验结果表明:抓卡装置下夹板的运动行程大于2 mm

能够保证宏动系统和微动台交接过程的安全性.抓卡装置的开启时间为350 ms

快速缓冲锁紧时间为850 ms

可承载的

向驱动力大于700 N.该系统满足双工件台工作及换台过程对可靠性和快速性的要求.

Abstract

To reduce the swap time of wafer stage in a dual-stage lithography

and to guarantee the connection reliability between a long stroke system and the wafer stage

a macro-micro coupling system of dual-stage lithography was designed. On the basis of compliance mechanical theory

the fast gripper of coupling system was designed to realize the compactedness of the system

and its locking force was analyzed. A flexible mechanism of the fast gripper was designed

including a flexible lever and a clamp reset unit

then they were analyzed by finite element method. The pneumatic system in the fast gripper was designed. To guarantee the rapidity and safety in the locking process of coupling device

the pneumatic system could realize three dynamic locking process

and complete the buffer locking of the fast gripper. Finally

the experiments of clamp motion test and the clamping force test were performed. Experimental results indicate that the stroke of the clamp is greater than 2 mm

which meets the safety needs of stroke system and wafer stage. Moreover

the opening time and fast buffer closing time of the clamp coupling mechanism are 350 ms and 850 ms respectively

and can bear

direction driving force more than 700 N. The coupling system ensures the reliability of the working process and rapidity of wafer stage swap process.

关键词

Keywords

references

BROERS A N. Resolution, overlay, and field size for lithography systems [J].Electron Devices Meeting, 1981, 28(11): 1268-1278.

武志鹏, 陈兴林, 李欣,等. 双工件台光刻机换台过程的轨迹规划及控制[J]. 哈尔滨工业大学学报,2013,45(3):7-13. WU ZH P, CHEN X L, LI X, et al.. Trajectory planning and control method for wafer stage exchange process of dual-stage lithography [J].Journal of Harbin Institute of Technology, 2013,45(3):7-13. (in Chinese)

袁琼雁, 王向朝. 国际主流光刻机研发的最新进展[J]. 激光与光电子学进展,2007, 44(1):57-64. YUAN Q Y,WANG X CH. Recent development of international mainstream lithographic tools [J].Laser & Optoelectronics Progress,2007, 44(1): 57-64. (in Chinese)

BOONMAN M, VIN C V D, TEMPELAARS S,et al.. The performance advantages of a dual stage system [J]. Optical Microlithography, 2004: 743.

BOUDEWIJN G S, TOM C, RICHARD C J C, et al.. Performance results of a new generation of 300mm lithography systems [C]. Proceedings of SPIE, 2001, 544-557.

彭袆帆, 袁波, 曹向群. 光刻机技术现状及发展趋势[J]. 光学仪器, 2010, 32(4): 80-85. PENG Y F, YUAN B, CAO X Q. Technical status and developing trend of lithographic tools [J].Optical Instruments,2010, 32(4): 80-85. (in Chinese)

ENOMOTO M, SHIMOAOKI T, NAFUS K, et al.. Investigation of processing performance and requirements for next generation lithography cluster tools[C]. Proceedings of SPIE. Bellingham WA:SPIE, 2011, 7972:79722X1-79722XI1.

何煦, 向阳. 数字横向剪切干涉仪相移技术[J]. 光学精密工程, 2013, 21(9): 2244-2251. HE X,XIANG Y. Phase-shifting technology of digital lateral shearing interferometer [J]. Opt. Precision Eng., 2013,21(9): 2244-2251 (in Chinese)

YIM BUN P K, ENGELBERTUS A F, et al.. Crash prevention in positioning apparatus for use in lithographic projection appratus:US.6498350B2 [P]. 2002.

袁志扬, 李巍, 吴小传. 双工件台夹持机构:中国,CN102487030A [P]. 2010. YUAN ZH Y, LI W, WU X CH.Clamping mechanism of Dual stage,China:CN102487030A [P].2002.

游群. 直线电机驱动的绿色夹具系统研究[D]. 苏州:苏州大学, 2009. YOU Q. Research on the green clamping device system driven by the linear motor [D]. Suzhou: Soochow University, 2009.(in Chinese)

刘丽莉. 减速电机驱动的绿色夹具系统研究[D]. 苏州:苏州大学, 2011. LIU L L. Study on green clamping system driven by gear motor [D]. Suzhou: Soochow University, 2011.(in Chinese)

LOBONTIU N, CULLIN M. In-plane elastic response of two-segment circular-axis symmetric notch flexure hinges: The right circular design [J]. Precision Engineering, 2013, 37: 542-555.

姚建涛, 李立建, 杨维, 等. 直圆柔性球铰柔度矩阵的解析计算[J]. 光学精密工程,2014, 22(7): 1857-1863. YAO J T, LI L J, YANG W, et al.. Analytical calculation of compliance matrix for right-circular flexure spherical hinge [J]. Opt. Precision Eng., 2014, 22(7):1857-1863.(in Chinese)

马立, 谢炜, 刘波, 等. 柔性铰链微定位平台的设计[J]. 光学精密工程, 2014, 22(2): 338-345. MA L, XIE W, LIU B, et al.. Design of micro-positioning stage with flexure hinge [J].Opt. Precision Eng., 2014, 22(2):338-345.(in Chinese)

WANG R Q, ZHOU X Q, ZHU Z W. Development of a novel sort of exponent-sine-shaped flexure hinges [J]. Review of Scientific Instruments, 2013,84(9):1-11.

赵磊, 巩岩, 赵阳. 光刻投影物镜中的透镜X-Y柔性微动调整机构[J]. 光学精密工程,2013, 21(6): 1425-1433. ZHAO L, GONG Y, ZHAO Y. Flexure-based X-Y micro-motion mechanism used in lithographic lens [J]. Opt. Precision Eng., 2013,21(6): 1425-1433. (in Chinese)

浏览量

909

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

适应动态加速度场的压电-液压串联复合激振装置研制

电磁驱动柔顺微定位平台闭环频域逆迭代学习控制

大行程快速反射镜的结构设计及带宽特性

压电位移放大机构的力学解析模型及有限元分析

一种新型柔性直线导向机构及其运动精度分析