数控机床热误差补偿最佳转速选择

苗恩铭; 吕玄玄; 苗继超; 党连春

doi:10.3788/OPE.20152311.3176

您当前的位置：

首页 >

文章列表页 >

数控机床热误差补偿最佳转速选择

微纳技术与精密机械 | 更新时间：2020-08-13

- 数控机床热误差补偿最佳转速选择
- Selection of optimum spindle speed to thermal error compensation of machine tools
- 光学精密工程 2015年23卷第11期页码：3176-3182
- 作者机构：
  
  合肥工业大学仪器科学与光电工程学院,安徽合肥,230009
- 作者简介：
- 基金信息：
  
  国家自然科学基金重大项目(No.51490660/51490661)();国家自然科学基金资助项目(No.51175142/E051102)()
- DOI：10.3788/OPE.20152311.3176
  中图分类号： TG659;TH161
- 收稿日期：2015-03-07，
  
  修回日期：2015-04-15，
  
  纸质出版日期：2015-11-25
- 稿件说明：
移动端阅览
苗恩铭, 吕玄玄, 苗继超等. 数控机床热误差补偿最佳转速选择[J]. 光学精密工程, 2015,23(11): 3176-3182

MIAO En-ming, LV Xuan-xuan, MIAO Ji-chao etc. Selection of optimum spindle speed to thermal error compensation of machine tools[J]. Editorial Office of Optics and Precision Engineering, 2015,23(11): 3176-3182
苗恩铭, 吕玄玄, 苗继超等. 数控机床热误差补偿最佳转速选择[J]. 光学精密工程, 2015,23(11): 3176-3182 DOI： 10.3788/OPE.20152311.3176.

MIAO En-ming, LV Xuan-xuan, MIAO Ji-chao etc. Selection of optimum spindle speed to thermal error compensation of machine tools[J]. Editorial Office of Optics and Precision Engineering, 2015,23(11): 3176-3182 DOI： 10.3788/OPE.20152311.3176.

摘要

为提高数控机床热误差补偿模型在实际工程应用中的补偿精度和稳健性

研究了热误差补偿建模时机床最佳转速状态的选择方法。首先

以Leaderway V-450数控加工中心主轴

向为研究对象

控制机床主轴在空转状态下

以图谱和恒定转速两种方式进行了多批次实验。然后

采用模糊聚类结合灰色关联度选择温度敏感点并建立多元线性回归模型。最后

分析不同转速类型下模型的预测效果并对同种转速类型下模型预测效果进行相对评价

从而给出热误差补偿建模时机床最佳转速状态的选择方法。实验结果表明

根据国际标准中不同主轴转速类型建立的热误差补偿模型

对于机床热误差预测效果存在较大差异。根据实际工程应用选择的最佳转速状态建立的补偿模型有较好的预测效果。

Abstract

To improve the compensation accuracy and robustness of a thermal error compensation model for Computer Numerical Control(CNC) machine center in practical engineering applications

a selection method for the optimal speed of CNC machine center was presented. For the

-axis of Leaderway V-450 CNC machining center

several batches of experiments were carried out at a variable speed spectrum and a constant speed by controlling the spindle in an idling condition. Then

fuzzy clustering method combined with the gray correlation was used to select the temperature sensitive point and establish multiple linear regression models. Finally

by analysis of the model predictive effect in different type speeds and comparison of the model predictive effect in the same speed type

a selection method for the optimum spindle speed of CNC center in modeling of thermal error compensation was given. The research results show that thermal error compensation models established by different spindle speed regimes based on the international standard have great differences in the thermal error predictive effect of machine tools. It suggests that the compensation model based on optimum spindle speeds selected by practical engineering application will provide a good prediction effect.

关键词

Keywords

references

RAMESH R, MANNAN M A, POO A N. Error compensation in machine tools-A review, Part Ⅱ:Thermal errors[J]. International Journal of Machine Tools and Manufacture, 2000, 40:1257-1284.

ROBERT B, ARONSON. War against thermal expansion[J]. Manufacturing Engineering,1996,116(6):45-50.

BRYAN J B. International status of thermal error research[J]. Ann CIRP, 1990, 39(2):645-656.

FERREIRA P M, LIU C R. Method for estimating and compensating quasistatic errors of machine tools[J]. Journal of Engineering for Industry, 1993, 115(1):149-159.

YANG S, YUAN J, NI J. Accuracy enhancement of a horizontal machining center by real-time error compensation[J]. Journal of Manufacturing Systems,1996, 15(2):113-124.

YANG H, NI J. Dynamic neural network modeling for nonlinear, nonstationary machine tool thermally induced error[J]. International Journal of Machine Tools & Manufacture, 2005, 45(4):455-465.

李永祥,杨建国. 灰色系统模型在机床热误差建模中的应用[J]. 中国机械工程,2006,23:2439-2442. LI Y X, YANG J G. Application of grey system model to thermal error modeling on machine tools[J]. China Mechanical Engineering, 2006, 23:2439-2442.(in Chinese)

IS0 230-3:2001.Test code for machine tools-Part 3:Determination of thermal effects[S].

JIRI V. Compensation of machine tool thermal deformation in spindle axis direction based on decomposition method[J]. Precision Engineering, 2012, 36:121-127.

XIANG S T, LU H X, YANG J G. Thermal error prediction method for spindles in machine tools based on a hybrid model[J]. Journal of Engineering Manufacture, 2015, 229(1):130-140.

HAN J, WANG L P, WANG H T. A new thermal error modeling method for CNC machine tools[J]. International Journal of Advanced Manufacture Technology, 2012, 62:205-212.

陈征,狄瑞坤. 关于机床热关键点的辨识问题的研究现状分析[J]. 组合机床与自动化加工技术,2004(2):33-34. CHEN ZH, DI R K. Analysis of the research status of identification problems of thermal key points for machine tools[J].Modular Machine Tool & Automatic Manufacturing Technique, 2004(2):33-34.(in Chinese)

MIAO E M, NIU P C, FEI Y T. Selecting temperature-sensitive points and modeling thermal error of machine tools[J]. Journal of the Chinese Society of Mechanical Engineers, 2011, 32(6):559-565.

MIAO E M, GONG Y Y, DANG L CH, et al.. Temperature-sensitive point selection of thermal error model of CNC machining center[J].International Journal of Advanced Manufacture Technology, 2014, 74(5-8):681-691.

苗恩铭,龚亚运,徐祗尚,等. 数控机床热误差补偿模型稳健性比较分析[J]. 机械工程学报,2015, 51(7):130-135. MIAO E M, GONG Y Y, XIU ZH SH, et al.. Comparative analysis of thermal error compensation model robustness of CNC machine tools[J].Journal of Mechanical Engineering, 2015, 51(7):130-135.(in Chinese)

何晓群. 应用多元统计分析[M]. 第1版.北京:中国统计出版社,2010. HE X Q. Application of multivariate statistical analysis[M]. first edition, Beijing:China Statistics Press, 2010.(in Chinese)

费业泰. 误差理论与数据处理[M]. 第6版.北京:机械工业出版社,2010. FEI Y T. Error theory and data handle[M]. sixth edition, Beijing:China Machine Press, 2010.(in Chinese)

浏览量

417

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

支持向量回归机在数控加工中心热误差建模中的应用

基于热传导和卷积神经网络的磨床主轴热误差预测

机床主轴热设计研究综述

数控机床热误差时间序列模型预测稳健性的提升

超精密切削加工表面粗糙度影响因素的实验