激光选区烧结超高分子量聚乙烯工艺及性能

肖泽锋; 杨永强; 宋长辉; 郑潇剑; 余家阔

doi:10.3788/OPE.20162403.0502

您当前的位置：

首页 >

文章列表页 >

激光选区烧结超高分子量聚乙烯工艺及性能

现代应用光学 | 更新时间：2020-08-13

- 激光选区烧结超高分子量聚乙烯工艺及性能
- Process and properties of selective laser sintering ultrahigh molecular weight polyethylene
- 光学精密工程 2016年24卷第3期页码：502-510
- 作者机构：
  
  1. 华南理工大学机械与汽车工程学院,广东广州,510640
  2. 北京大学第三医院运动医学研究所北京,100083
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目(No.81327001)();北京市科技计划资助项目(No.Z131100005213004)();中国博士后基金(No.2015M57090
- DOI：10.3788/OPE.20162403.0502
  中图分类号： TB32;TN249
- 收稿日期：2015-10-16，
  
  修回日期：2015-12-07，
  
  纸质出版日期：2016-03-25
- 稿件说明：
移动端阅览
肖泽锋, 杨永强, 宋长辉等. 激光选区烧结超高分子量聚乙烯工艺及性能[J]. 光学精密工程, 2016,24(3): 502-510

XIAO Ze-feng, YANG Yong-qiang, SONG Chang-hui etc. Process and properties of selective laser sintering ultrahigh molecular weight polyethylene[J]. Editorial Office of Optics and Precision Engineering, 2016,24(3): 502-510
肖泽锋, 杨永强, 宋长辉等. 激光选区烧结超高分子量聚乙烯工艺及性能[J]. 光学精密工程, 2016,24(3): 502-510 DOI： 10.3788/OPE.20162403.0502.

XIAO Ze-feng, YANG Yong-qiang, SONG Chang-hui etc. Process and properties of selective laser sintering ultrahigh molecular weight polyethylene[J]. Editorial Office of Optics and Precision Engineering, 2016,24(3): 502-510 DOI： 10.3788/OPE.20162403.0502.

摘要

研究了激光选区烧结(SLS)成型工艺中不同工艺参数以及后续热处理工艺对超高分子量聚乙烯(UHMWPE)材料成型性能的影响。通过调整扫描间距、激光功率、扫描速度等不同工艺参数

描述了SLS成型UHMWPE零件的致密度、拉伸强度以及断裂伸长率

并对热处理前后的SLS成型UHMWPE零件的力学性能进行了比较。结果显示

致密度、拉伸强度、断裂伸长率总体上与激光功率呈正相关关系

与扫描间距、扫描速度呈负相关关系。经热处理后

SLS成型UHMWPE零件的力学性能有明显提高

致密度达到95.12%

抗拉强度达到24.08 MPa

断裂伸长率达到334.82 MPa。实验结果表明:SLS成型UHMWPE零件与模塑成型UHMWPE零件性能尚有差距

仅优化成型工艺不足以得到理想性能

但经热处理后

零件性能基本满足使用要求。

Abstract

The effects of different processing parameters in Selective Laser Sintering(SLS) and subsequent heat treatment on the mechanical properties of Ultrahigh Molecular Weight Polyethylene(UHMWPE) specimens were investigated. By adjusting the different processing parameters

such as scanning space

scanning speed and laser power

the density

tensile strength and breaking elongation of UHMWPE specimens fabricated by SLS were described

then the mechanical properties of the UHMWPE specimens with and without heat treatments were compared. The experimental result demonstrates that the relative density

tensile strength and the breaking elongation have a positive correlation with the laser power and have a negative correlation with the scanning space and scanning speed. After heat treating

the mechanical properties of the UHMWPE specimens are improved obviously and the relative density

tensile strength and the breaking elongation are 95.12%

24.08 MPa

and 334.82 MPa respectively. These results suggest that the mechanical properties of UHMWPE specimens fabricated by SLS is weaker than that fabricated by molding. Process optimization can not get the ideal performance

but the mechanical property can be enhanced to meet the requirements after heat treatment.

关键词

Keywords

references

RAJABI K E, HAMID B. Determination of optimum SLA process parameters of H-shaped parts[J]. J. Mech. Sci. Technol., 2013, 27(3):857-863.

BOSCHETTO A, VENIALI F. Intricate shape prototypes obtained by FDM[J]. Int. J. Mater. Form., 2010, 3(S1):1099-1102.

WEISENSEL L, TRAVITZKY N, SIEBER H. et al.. Laminated object manufacturing(LOM) of SiSiC composites[J]. Adv. Eng. Mater., 2004, 6(11):899-903.

丁利, 李怀学, 王玉岱, 等. 热处理对激光选区熔化成形316不锈钢组织与拉伸性能的影响[J]. 中国激光, 2015(4):187-193.DING L, LI H X, WANG Y D, et al.. Heat treatment on microstructure and tensile strength of 316 stainless steel by selective laser melting[J]. Chinese Journal of Lasers, 2015(4):187-193.(in Chinese)

宋长辉, 杨永强, 张曼慧, 等. 基于数字化3D技术的股骨假体再设计与激光选区熔化制造[J]. 光学精密工程, 2014, 22(8):2117-2126.SONG CH H, YANG Y Q, ZHANG M H, et al.. Redesign and selective laser melting manufacturing of femoral component based on digital 3D technology[J]. Opt. Precision Eng., 2014, 22(8):2117-2126.(in Chinese)

闫岸如, 杨恬恬, 王燕灵, 等. 变能量激光选区熔化IN718镍基超合金的成形工艺及高温机械性能[J]. 光学精密工程, 2015, 23(6):1695-1704.YAN A R, YANG T T, WANG Y L, et al.. Forming process and high-temperature mechanical properties of variable energy laser selective melting manufacturing IN718 superalloy[J]. Opt. Precision Eng., 2015, 23(6):1695-1704.(in Chinese)

樊仁轩. 激光选区烧结高分子材料的加工工艺改善及相应技术研究[D]. 广州:华南理工大学, 2015.FAN R X. The Study on Molding Quality Improvement and Corresponding Technology of High Polymer Material by Selective Laser Sintering[D]. Guangzhou:South China University of Technology, 2015.(in Chinese)

KRUTH J P, WANG X, LAOUI T, et al.. Lasers and materials in selective laser sintering[J]. Assembly Autom., 2003, 23(4):357-371.

SZILVIA E, DERMOT B, STEFAN L, et al.. Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds[J]. Acta Biomater., 2010, 6(7):2511-2517.

GU D D, MEINERS W, WISSENBACH K, et al.. Laser additive manufacturing of metallic components:materials, processes and mechanisms[J]. Int. Mater. Rev., 2012, 57(3):133-164.

李小飞, 朱东彬, 董俊慧. 激光选区烧结及其在精密制造业中的应用[J]. 光学精密工程. 2013, 2(5):1222-1227.LI X F, ZHU D B, DONG J H. Selective laser sintering and its application to precision casting process for ceramic models[J]. Opt. Precision Eng., 2013, 2(5):1222-1227.(in Chinese)

WILLIAM H, MICHELLE G. Solidification in direct metal deposition by LENS processing[J]. JOM-US., 2001, 53(9):30-34.

CHAO G, GE W J, LIN F. Eeffects of scanning parameters on material deposition during electron beam selective melting of Ti-6Al-4V powder[J]. J. Mater. Process Tech., 2015, 217:148-157.

RIVEIRO A, SOTO R, DEL VAL J, et al.. Laser surface modification of ultra-high-molecular-weight polyethylene(UHMWPE) for biomedical applications[J]. Appl. Sure. Sci., 2014, 302:236-242.

KOBAYASHM, KOIDE T, HYON S H. Tribological characteristics of polyethylene glycol(PEG) as a lubricant for wear resistance of ultra-high-molecular-weight polyethylene(UHMWPE) in artificial knee join[J]. J. Mech. Behav. Biomed., 2014, 38:33-38.

RIMELL J T, MARQUIS P M. Selective laser sintering of ultra high molecular weight polyethylene for clinical applications[J]. Journal of Biomedical Materials Research, 2000, 53(4):414-420.

汪艳. 选择性激光烧结高分子材料及其制件性能研究[D]. 武汉:华中科技大学, 2005.WANG Y. Study on the Polymer Materials of Selective Laser Sintering and the Properties of Sintered Parts[D]. Wuhan:Huazhong University of Science and Technology, 2005.(in Chinese)

GOODRIDGE R D, HAGUE R J M, TUCK C J. An empirical study into laser sintering of ultra-high molecular weight polyethylene(UHMWPE)[J]. J. Mater. Process Tech., 2010, 210(1):72-80.

郑潇剑. 激光选区烧结设备改进及人工胫骨垫片设计与制造研究[D]. 广州:华南理工大学, 2015.ZHENG X J. Study on Improvement of Selective Laser Sintering Equipment and Design and Manufacturing of Artificial Tibial Gasket[D]. Guangzhou:South China University of Technology, 2015.(in Chinese)

浏览量

211

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

镍基高温合金喷油孔的飞秒激光精密加工

铝合金表面激光沉积Al_0.8FeCoNiCrCu_x高熵合金组织与耐蚀性能

基于清洗表面形貌的AH32钢激光除锈机制研究

基于清洗表面形貌的AH32钢激光除锈机制

铝合金表面激光沉积AlCrFeCoNiCu高熵合金组织与工艺优化