抗高过载微流体惯性开关

黄刘; 聂伟荣; 王晓锋; 沈腾

doi:10.3788/OPE.20162403.0526

您当前的位置：

首页 >

文章列表页 >

抗高过载微流体惯性开关

微纳技术与精密机械 | 更新时间：2020-08-13

- 抗高过载微流体惯性开关
- A microfluidic inertial switch with response characteristics to high acceleration
- 光学精密工程 2016年24卷第3期页码：526-532
- 作者机构：
  
  南京理工大学机械工程学院,江苏南京,中国,210094
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目(No.51475245)()
- DOI：10.3788/OPE.20162403.0526
  中图分类号： TH824.4;TM564
- 收稿日期：2015-08-18，
  
  修回日期：2015-11-12，
  
  纸质出版日期：2016-03-25
- 稿件说明：
移动端阅览
黄刘, 聂伟荣, 王晓锋等. 抗高过载微流体惯性开关[J]. 光学精密工程, 2016,24(3): 526-532

HUANG Liu, NIE Wei-rong*, WANG Xiao-feng etc. A microfluidic inertial switch with response characteristics to high acceleration[J]. Editorial Office of Optics and Precision Engineering, 2016,24(3): 526-532
黄刘, 聂伟荣, 王晓锋等. 抗高过载微流体惯性开关[J]. 光学精密工程, 2016,24(3): 526-532 DOI： 10.3788/OPE.20162403.0526.

HUANG Liu, NIE Wei-rong*, WANG Xiao-feng etc. A microfluidic inertial switch with response characteristics to high acceleration[J]. Editorial Office of Optics and Precision Engineering, 2016,24(3): 526-532 DOI： 10.3788/OPE.20162403.0526.

摘要

基于微连通器结构

提出了一种使用盐水(NaCl溶液)作为工作流体且具有高的抗过载能力的微流体惯性开关。分析了液滴的分离机理

设计了开关的流道结构。然后

对开关进行了理论分析

建立了开关模型。最后

利用流体动力学仿真和样机实验相结合的方法

对开关结构和功能进行了验证。验证结果显示:在幅值为30000

阶跃型加速度作用下

开关的工作流体仍未发生分离

加速度的幅值与开关响应时间相关。另外

开关样机能够使盐水液面形成高度差

样机的静态加速度阈值为134.6

~152.3

非常接近其理论计算的加速度阈值142.7

。得到的结果表明

采用的微连通器结构能够极大地增强微流体惯性开关的抗液体分离能力

能够对加速度幅值进行区分

并实现闭锁功能

同时显示了高的抗过载能力。

Abstract

On the basis of micro communicating vessels

a novel microfluidic inertial switch with excellent response characteristics to a high acceleration over 30000

was proposed. Brine was selected as the working-fluid due to its conductivity and non-toxicity. The mechanism of droplet separation was discussed

and the channel structure of the switch was designed. Then

the working principle of the switch was theoretically analyzed and modeled. Finally

by the combination of Computational Fluid Dynamics(CFD) simulation technology and a prototype experiment

the structure and functions of the switch were verified. The results show that fluid dispersion problem has been avoided even under the 30000

high step acceleration

and the bigger acceleration amplitude leads to the shorter response time. By the review of the experiment results

the height difference of the two liquid-gas interfaces of the brine can be realized at the initial state and the static acceleration threshold of the prototype is between 134.6

to 152.3

which is agreed well with its theoretical counting acceleration threshold 142.7

. The experiments indicate that the micro communicating vessels efficiently improve the anti-dispersion ability of the microfluidic inertial switch. It separates the acceleration amplitude and shows good latching function and higher response characteristics to the high acceleration.

关键词

Keywords

references

KIM J W, SHEN W J, KIM CH J, et al.. A micromechanical switch with electrosstatically driven liquid-mental droplet[J]. Sensors and Actuators A, 2002,(97-98):672-679.

SIMON J, SAFFER S, KIM CH J. A liquid-filled microrelay with a moving mercury microdrop[J]. Journal of Micro-electro-mechanical Systems, 1997(6):208-216.

YOO K H, KIM J W. A novel configurable mems inertial switch using microscale liquid-mental dropletp[C]. IEEE, 2009:793-796.

YOO K H, PARK U, KIM J W. Development and characterization of a nover configurable MEMS inertial switch using a microscale liquid-mental droplet in a microstructured channel[J]. Sensors and Actuators A, 2011, 166:234-240.

LIU T T, SU W, YANG T, et al.. Evaluation of the threshold trimming method for micro inertial fluidic switch based on electrowetting technology[J]. AIP Advances, 2014, 4:03712.

LIU T T, SU W, YANG T, et al.. Vibration interference analysis and verification of micro-fluidic inertial switch[J]. AIP Advances, 2014, 4:031313.

KIM J-W, KIM CH-J. Nanostructured surfaces for dramatic reduction of flow resistance in droplet-based microfluidics[C]. IEEE, 2002:479-482.

FENG Y Y, ZHOU ZH Y, YE X Y, et al.. Passive valves based on hydrophobic microfluidics[J]. Sensors and Actuators A, 2003, 108:138-143.

CHO H S, KIM H-Y, KANG J Y, et al.. How the capillary burst microvalve works[J]. Journal of Colloid and Interface Science, 2007, 306:379-385.

CHEN J M, HUANG P-C, LIN M-G. Analysis and experiment of capillary valves for microfluidics on a rotating disk[J]. Microfluid Nanofluid, 2008, 4(5):427-437.

杜新, 张平, 刘永顺, 等. 基于PDMS和玻璃材料的毛细管被动阀临界压力分析[J]. 光学精密工程, 2011, 19(8):1852-1858.DU X, ZHANG P, LIU Y SH, et al.. Burst pressure of capillary burst valve base on glass and PDMS[J]. Opt. Precision Eng., 2011, 19(8):1852-1858.(in Chinese)

陈花卫, 杨涛, 蔺怡, 等. 基于毛细管阀的微流体惯性开关建模与仿真[J]. 微纳电子技术, 2010, 47(12):742-747.CHENG H W, YANG T, LIN Y, et al.. Modeling and simulation of micro-fluid inertial switches based on the capillary valve[J]. MEMS Device & Technology, 2010, 47(12):742-747.(in Chinese)

蔺怡, 杨涛, 刘婷婷, 等. 惯性微流体开关阈值特性与响应历程的数值仿真[J]. 机械设计与研究, 2012, 28(1):90-94.LIN Y, YANG T, LIU T T, et al.. Numerical simulation on threshold characteristics and response process of micro-fluidic inertial switch[J]. Machine Design and Research, 2012, 28(1):90-94.(in Chinese)

浏览量

109

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

高阈值长脉宽响应的微流体惯性开关