并联测量机柔性动力学建模与误差耦合

赵磊; 赵新华; 周海波; 王收军; 牛兴华

doi:10.3788/OPE.20162410.2471

您当前的位置：

首页 >

文章列表页 >

并联测量机柔性动力学建模与误差耦合

微纳技术与精密机械 | 更新时间：2020-07-07

- 并联测量机柔性动力学建模与误差耦合
- Flexible dynamic modeling and error coupling of parallel measuring machine
- 光学精密工程 2016年24卷第10期页码：2471-2479
- 作者机构：
  
  1.天津理工大学机械工程学院天津市先进机电系统设计与智能控制重点实验室, 天津 300384
  2.佳木斯大学机械工程学院, 佳木斯 154007
- 作者简介：
  
  [ "林辽源人,博士,讲师,2012年于天津大学获得博士学位,主要研究方向智能三坐标测量和机电一体化技术。E-mail:leizhaotjut@163.com;赵新华(1962-),男,博士,教授,2000年于天津大学获得博士学位,主要研究方向为机器人技术和机电一体化技术。Email:xinhuazhao@tjut.edu.cn" ]
- 基金信息：
  
  国家自然科学基金资助项目(No.51275353，No.51275209);天津市应用基础与前沿技术研究计划重点项目(No.14JCZDJC39100);天津市高等学校科技发展基金资助项目(No.20140401)
- DOI：10.3788/OPE.20162410.2471
  中图分类号： TP242.6;TH112
- 收稿日期：2016-05-10，
  
  录用日期：2016-6-21，
  
  纸质出版日期：2016-10
- 稿件说明：
移动端阅览
赵磊, 赵新华, 周海波, 等. 并联测量机柔性动力学建模与误差耦合[J]. 光学精密工程, 2016,24(10):2471-2479.

Lei ZHAO, Xin-hua ZHAO, Hai-bo ZHOU, et al. Flexible dynamic modeling and error coupling of parallel measuring machine[J]. Optics and precision engineering, 2016, 24(10): 2471-2479.
赵磊, 赵新华, 周海波, 等. 并联测量机柔性动力学建模与误差耦合[J]. 光学精密工程, 2016,24(10):2471-2479. DOI： 10.3788/OPE.20162410.2471.

Lei ZHAO, Xin-hua ZHAO, Hai-bo ZHOU, et al. Flexible dynamic modeling and error coupling of parallel measuring machine[J]. Optics and precision engineering, 2016, 24(10): 2471-2479. DOI： 10.3788/OPE.20162410.2471.

摘要

为解决目前高速机构存在的高速与高精度之间的矛盾，研究了高速并联测量机的柔性问题。应用弹性梁运动学理论和Galerkin模态截断法推导了一维弹性梁运动学变形位移模型；以欧拉-贝努利梁为假设，应用Hamilton原理建立了考虑中线变形的柔性结构耦合动力学模型。最后，基于中线耦合动力学模型，测试了不同速度下弹性振动产生的误差，提出了通过调节黏滞摩擦系数来降低振动耦合误差，进而提高测量精度的方法。基于仿真实验验证了提出方法的有效性和可行性。结果表明：在忽略结构误差前提下，角速度为300 rad/s时产生的横向一阶振动耦合误差最大值为28.6

m；合理调整黏滞摩擦在0.4~0.5时，振动耦合误差降低至15

m以内，相比调整前误差降低了13.6

m。提出的方法为进一步解决高速与高精度之间的矛盾和研究高阶弹性振动与精度的耦合机理提供了理论基础。

Abstract

To solve the contradiction between speed and precision for a high speed mechanism

the flexible problem of a 3-RR-P parallel measuring machine was researched. On the basis of the elastic beam kinematics theory and Galerkin modal truncation method

a kinematics deformation model of one-dimensional elastic beam was established. Then

a flexible rod was assumed to be Euler-Bernoulli beam

the flexible structure coupling dynamics model considering the deformation of midline was built based on Hamilton principle. Finally

the measuring error generated by vibration of elastic beam was tested at different speeds based on midline coupling dynamics model. A method to reduce vibration coupling error by adjusting reasonably the viscous friction coefficient was proposed to improve the test accuracy. Experiment results show that the max lateral one-order coupling error is 28.6

m when angular velocity comes to 300 rad/s in ignoring structure errors. Moreover

when viscous friction coefficient is adjusted to be 0.4-0.5

the vibration coupling error is reduced to less than 15

reducing by 13.6

m as compared to that of the previous adjustment. These data have been verified to be effective and feasible for solving the contradiction between high speed and high precision. It offers a foundation for research on the coupling principle between high order elastic vibration and accuracy.

关键词

Keywords

references

ROCHA C R,TONETTO C P,DIAS A. A comparison between the Denavit-Hartenberg and the screw-based methods used in kinematic modeling of robot manipulators[J].Robotics and Computer Integrated Manufacturing.2014(4).

陈修龙,孙先洋,邓昱. 5自由度空间并联机构运动学优化设计[J]. 农业机械学报,2014,06:303-307.

CHEN X L, SUN X Y, DENG Y. Kinematics Optimum Design of a 5-DOF Spatial Parallel Mechanism[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014,06:303-307.

赵磊,赵新华,王收军. 高速平面6杆并联机器人运动学建模与误差分析[J]. 机械设计与制造,2016,3:157-159.

ZHAO L, ZHAO X H, WANG SH J, et al.. Kinematic Modeling and Error Analysis of the Plane Six Pole Parallel Robot in high speed[J]. Machinery Design&Manufacture, 2016,3:157-159.(in Chinese)

LI R J, FAN K CH, HUANG Q X.A long-stroke 3D contact scanning probe for micro/nano coordinate measuring machine[J]. Precision Engineering-journal of the International Societies for Precision Engineering and Nanotechnology, 2016,43:220-229.

张策. 机械动力学[M]. 北京:高等教育出版社,2015,4.

ZHANG C. Mechanical Dynamics[M]. Beijing:Higher Education Press, 2015,4. (in Chinese)

ZHANG Q H, ZHANG X M. Dynamic modeling and analysis of planar 3-RRR flexible parallel robot[J].Journal of Vibration Engineering, 2013,26(2):239-45.

XING H L,BO CH Z R Q. The calibration and error compensation techniques for an Articulated Arm CMM with two parallel rotational axes[J].Measurement,2013,46(1):603-9.

SANTOLARIA J, MAJARENA A C, SAMPER D,et al..Articulated Arm Coordinate Measuring Machine Calibration by Laser Tracker Multi laceration[J].Scientific World Journal,2014.

SUO X G,CHENG L,FU Y J. Calibration and uncertainty evaluation of double parallel-joint coordinate measuring machine[J]. Optics and Precision Engineering,22,5,2014(5).

赵磊,赵新华,王收军,等. 柔性测量臂的RPY建模与误差标定[J]. 光学精密工程, 2016,24(2).365-371.

ZHAO L, ZHAO X H, WANG SH J,et al.. RPY modeling and error calibration of flexible measuring arm[J]. Opt. Precision Eng.,2016,24(2):365-371.(in Chinese)

李松原,胡鹏浩. 并联坐标测量机的结构优化[J]. 光学精密工程,2013(11). LI S Y,HU P H. Structure optimization of parallel CMM[J]. Opt. Precision Eng., 2013(11). (in Chinese)

姜丽忠,赵跃宇. 作大范围运动柔性结构的耦合动力学[M]. 北京:科学出版社,2007,5.

JIANG L ZH, ZHAO Y Y. The Coupling Dynamics of Flexible Structure for a Wide Range of Motion[M]. Beijing:Science Press,2007,5. (in Chinese)

杨辉,洪嘉振,余征跃. 一类刚-柔耦合系统的模态特性与实验研究[J]. 宇航学报,2002,23(3):67-72.

YANG H, HONG J ZH, YU ZH Y. Vibration analysis and experiment investigation for a typical rigid-flexible coupling system[J]. Journal of Astronautics, 2002,23(3):67-72.(in Chinese)

浏览量

440

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据