基于混合镜组模型的变焦镜头设计

张金凯; 陈晓波; 邵海燕; 王晓慧; 孙选

doi:10.3788/OPE.20182601.0038

您当前的位置：

首页 >

文章列表页 >

基于混合镜组模型的变焦镜头设计

现代应用光学 | 更新时间：2020-08-13

- 基于混合镜组模型的变焦镜头设计
- Zoom lens design using mixed lens modules
- 光学精密工程 2018年26卷第1期页码：38-47
- 作者机构：
  
  1.济南大学机械工程学院, 山东济南 250022
  2.上海交通大学机械与动力工程学院, 上海 200240
- 作者简介：
  
  [ "张金凯(1986-), 男, 山东德州人, 博士, 讲师, 2008年于山东大学获得学士学位, 2011年于中国科学院长春光机所获得硕士学位, 2015年于上海交通大学获得博士学位, 主要从事光学设计、光学检测、精密测量以及机器视觉等方面的研究。E-mail:youjianer@sohu.com" ]
  [ "陈晓波(1979-), 男, 博士, 助理研究员, 2001年、2009年于上海交通大学分别获得学士、博士学位, 2002年于上海交通大学获得工商管理第二学士学位, 2003年于美国密西根大学获得硕士学位, 2012年于上海交通大学师资博后出站, 主要从事三维视觉测量等方面的研究。E-mail:xiaoboc@sjtu.edu.cn" ]
- 基金信息：
  
  国家973重点基础研究发展计划资助项目(2014CB046604);国家重大科技专项资助项目(2014ZX04015-021);国家自然科学基金资助项目(51105255);国家自然科学基金资助项目(51205251);济南大学博士科研基金资助项目(XBS1641);济南大学博士科研基金资助项目(XBS1640);山东省联合专项资助项目(ZR2016EL14)
- DOI：10.3788/OPE.20182601.0038
  中图分类号： TH74
- 收稿日期：2017-04-21，
  
  录用日期：2017-6-1，
  
  纸质出版日期：2018-01-25
- 稿件说明：
移动端阅览
张金凯, 陈晓波, 邵海燕, 等. 基于混合镜组模型的变焦镜头设计[J]. 光学精密工程, 2018,26(1):38-47.

Jin-kai ZHANG, Xiao-bo CHEN, Hai-yan SHAO, et al. Zoom lens design using mixed lens modules[J]. Optics and precision engineering, 2018, 26(1): 38-47.
张金凯, 陈晓波, 邵海燕, 等. 基于混合镜组模型的变焦镜头设计[J]. 光学精密工程, 2018,26(1):38-47. DOI： 10.3788/OPE.20182601.0038.

Jin-kai ZHANG, Xiao-bo CHEN, Hai-yan SHAO, et al. Zoom lens design using mixed lens modules[J]. Optics and precision engineering, 2018, 26(1): 38-47. DOI： 10.3788/OPE.20182601.0038.

摘要

为了优化变焦镜头的设计过程，本文提出了基于混合镜组模型的变焦镜头设计方法，包括近轴设计，镜组模型确定以及基于混合镜组模型的像差设计。近轴设计阶段采用了高斯括号和矩阵光学，可以很方便地构建镜组间隔和镜组焦距之间的关系。镜组模型确定阶段是根据现有镜头专利训练了一个镜组分类模型，它可以根据镜组近轴数据将镜组分为薄透镜模型或者厚透镜模型。像差设计阶段综合了薄镜组模型像差设计和厚镜组模型像差设计。镜组分类模型成功地将80%以上的镜组进行了分类。最后采用基于混合镜组模型设计方法设计了一个物方远心的变焦镜头。结果表明，该镜头具有良好的设计初值，基于混合镜组模型的变焦镜头设计方法能减少像差变量数量，准确、方便地完成像差设计。

Abstract

To facilitate zoom lens design

a systematic zoom lens design approach

based on mixed lens modules

is proposed in this paper

which consists of paraxial lens design

lens type determination

and aberration design. During paraxial lens design

Gaussian brackets and matrix optics are adopted

with which the relationship between component interval distances and component focal lengths can be easily determined. A lens module classification model is trained

with which the lens type can be determined from its thin lens parameters. More than 80% of the lens components have been successfully classified by the classification model. Mixed lens modules

namely thin lens modules and thick lens modules

are applied for aberration design of lens components

with which the component aberrations can be easily balanced and some practical considerations

such as interval distances between lens elements and components collisions

can be handled simultaneously. At last

an example is provided

which shows the detailed procedure of zoom lens design using mixed lens modules.

关键词

Keywords

references

徐明飞, 黄玮.高数值孔径投影光刻物镜波像差的自动平衡优化[J].光学精密工程, 2015, 23(8):2143-2148.

XU M F, HUANG W. Automatic balancing of wavefront aberrations in high-numerical aperture lithographic lenses[J]. Opt. Precision Eng ., 2015, 23(8):2143-2148. (in Chinese)

TANAKA K. Recent development of zoom lenses[J]. SPIE , 1997, 3129:13-22.

KAZUO T. Zooming-component loci of mechanically compensated zoom lenses[J]. SPIE , 1999, 3729:452-457.

TANAKA K. Zooming components loci of a generally constructed mechanically compensated zoom lens[J]. Optik-International Journal for Light and Electron Optics , 2001, 112(6):232-238.

MIKS A, NOVAK J. Paraxial analysis of four-component zoom lens with fixed distance between focal points[J]. Applied Optics , 2012, 51(21):5231-5235.

YOUNGWORTH R N, BETENSKY E I. Fundamental considerations for zoom lens design[J]. SPIE , 2012, 8488:848806.

KRYSZCZY ŃSKI T. Development of the double-sided telecentric three-component zoom systems by means of matrix optics[J]. SPIE , 2008, 7141:71411Y.

MIKŠ A, NOVÁK J. Design of a double-sided telecentric zoom lens[J]. Applied Optics , 2012, 51(24):5928-5935.

HOPKINS H H. An analytical technique for stable aberration correction in zoom systems[J]. SPIE , 1983, 399:100-135.

SALTER M J. Zoom lens aberration correction algorithm[J]. SPIE , 2001, 4487:76-82.

MIKŠ A. Modification of the formulas for third-order aberration coefficients[J]. Journal of the Optical Society of America A , 2002, 19(9):1867-1871.

MIKS A, NOVAK J, NOVAK P. Zoom lens design[J]. SPIE , 2005, 5962:596233.

MIKŠ, NOVÁK J, NOVÁK P, Method of zoom lens design[J]. Applied Optics , 2008, 47(32):6088-6098.

PAL S. Aberration correction of zoom lenses using evolutionary progra mming[J]. Applied Optics , 2013, 52(23):5724-5732.

ZHANG J K, CHEN X B, XI J T, et al .. Aberration correction of double-sided telecentric zoom lenses using lens modules[J]. Applied Optics , 2014, 53(27):6123-6132.

PARK S C, SHANNON R R. Zoom lens design using lens modules[J]. Optical Engineering , 1996, 35(6):1668-1676.

PARK S C. Zoom system design of 14X using optimized lens modules[J]. SPIE , 1997, 3129:60-67.

BANERJEE S, HAZRA L. Experiments with a genetic algorithm for structural design of cemented doublets with prespecified aberration targets[J]. Applied Optics , 2001, 40(34):6265-6273.

CHATTERJEE S, HAZRA L N. Structural design of cemented triplets by genetic algorithm[J]. Optical Engineering , 2004, 43(2):432-440.

CHATTERJEE S, HAZRA L N. Structural design of a lens component with prespecified aberration targets by evolutionary algorithm[J]. SPIE , 2007, 6668:66680S.

浏览量

499

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

三次样条插值优化渐进多焦点镜片非对称设计

小行星地形探测激光雷达接收光学系统设计

近红外二区宽谱段光学成像系统设计

基于液晶光栅的大视场红外凝视成像系统设计

适用于瞬态条件的多通道序列前光成像系统设计