回转形体点云的旋转轴线自动提取

李明磊; 王力

doi:10.3788/OPE.20182605.1219

您当前的位置：

首页 >

文章列表页 >

回转形体点云的旋转轴线自动提取

信息科学 | 更新时间：2020-08-13

- 回转形体点云的旋转轴线自动提取
- Automatic extraction of rotation axis line from 3D scanned point cloud of rotational symmetric object
- 光学精密工程 2018年26卷第5期页码：1219-1230
- 作者机构：
  
  信息工程大学导航与空天目标工程学院, 河南郑州 450001
- 作者简介：
  
  [ "李明磊(1989-), 男, 河南宝丰人, 博士研究生, 2011年、2014年于信息工程大学分别获得学士、硕士学位, 主要从事激光点云数据处理及精密工程测量等方面的研究工作。E-mail:mingleili_xd@163.com" ]
- 基金信息：
  
  国家自然科学基金资助项目(41274014);国家自然科学基金资助项目(41501491)
- DOI：10.3788/OPE.20182605.1219
  中图分类号： P258;TN16
- 收稿日期：2017-08-24，
  
  录用日期：2017-10-8，
  
  纸质出版日期：2018-05-25
- 稿件说明：
移动端阅览
李明磊, 王力. 回转形体点云的旋转轴线自动提取[J]. 光学精密工程, 2018,26(5):1219-1230.

Ming-lei LI, Li WANG. Automatic extraction of rotation axis line from 3D scanned point cloud of rotational symmetric object[J]. Optics and precision engineering, 2018, 26(5): 1219-1230.
李明磊, 王力. 回转形体点云的旋转轴线自动提取[J]. 光学精密工程, 2018,26(5):1219-1230. DOI： 10.3788/OPE.20182605.1219.

Ming-lei LI, Li WANG. Automatic extraction of rotation axis line from 3D scanned point cloud of rotational symmetric object[J]. Optics and precision engineering, 2018, 26(5): 1219-1230. DOI： 10.3788/OPE.20182605.1219.

摘要

固体火箭发动机推力线的测定是航天器精密安装领域的一项关键技术，也是回转形体旋转轴线提取的一种代表性应用。针对现有相关方法存在的结果不够客观、可靠性不高且适应性欠缺等问题，提出了一种基于表面法矢约束的回转形体点云旋转轴自动提取方法。首先，计算形体点云的表面法矢，通过设置最小二乘法矢计算标准差阈值剔除非可靠点集，用以对旋转轴计算结果进行质量保证；然后，选用可靠点作为种子点，依据种子点同纬点集法矢之间的特殊关系对此点集进行筛选，并对提取的同纬点集进行平面拟合和空间圆拟合，得到旋转轴初值；最后，根据点云表面法矢与旋转轴之间的位置关系列出最小二乘平差的目标函数，通过迭代平差求解初值的改正数，从而得到最终的旋转轴提取结果。通过实验测试，利用模拟数据和实测数据对方法的准确度和精密度进行验证。实验结果显示：有效采样间隔点云的旋转轴提取结果偏斜量达到0.01°以内，横移量达到0.02 mm以下，表明提出的方法正确，可以实现对回转形体点云旋转轴线的高可靠性自动提取。

Abstract

Measurement of solid rocket nozzle thrust line is one of a key technique in the field of spacecraft precise installation and is a representative application of rotation axis line extraction of rotational symmetric object. Given that the existing methods have the problems such as nonobjective

poor reliability and low adaptability

an automatic solution for rotation axis extraction from 3D scanned high density of point cloud data was proposed

in which all the surface points and their normal vectors were utilized as constraints. Firstly

the normal vector of each point in point cloud was calculated and unreliable points were eliminated according to the standard deviation value of local planar fitting for normal vector calculation. Then

the initial value of rotation axis was achieved through planar and spherical fitting of reference points which had same latitude with the randomly selected reliable seed point. Finally

refinement result of rotation axis was calculated by solving the objective function listed based on the relationship between normal vectors of each reliable point and the rotation axis. The test experiments were performed

and the accuracy and precision of the method were verified by simulated and measured data. The experimental results indicate that the deflection degree is under 0.003° and the transverse distance is under 0.02 mm

which satisfies the requirements of rotation axis extraction of rotational symmetric object.

关键词

Keywords

references

李广云, 李宗春.工业测量系统原理与应用[M].北京:测绘出版社, 2011.

LI G Y, LI Z CH. Principles and Applications of Industrial Measuring Systems[M]. Beijing:Surveying and Mapping Press, 2011. (in Chinese)

李明磊, 高欣圆, 李广云, 等.地面三维激光扫描仪与外架数码相机间安置参数的高精度标定[J].光学精密工程, 2016, 24(9):2158-2166.

LI M L, GAO X Y, LI G Y, et al .. High accuracy calibration of installation parameters between 3D terrestrial laser scanner and external-installed digital camera[J]. Opt. Precision Eng., 2016, 24(9):2158-2166. (in Chinese)

李明磊, 宗文鹏, 李广云, 等.基于体素生长的点云结构直线段提取[J].光学学报, 2018, 38(1):0112001.

LI M L, ZONG W P, LI G Y, et al .. Extraction of structure line segments from point clouds using voxel-based region growing[J]. Acta Optica Sinica, 2018, 38(1):0112001. (in Chinese)

王世光, 蒋太飞, 田义宏.飞航导弹固体火箭发动机技术进展[J].飞航导弹, 2006(6):47-50.

WANG SH G, JIANG T F, TIAN Y H. Progress of winged missile solid rocket engine technology[J]. Winged Missiles Journal, 2006(6):47-50. (in Chinese)

李学焕, 李俊, 王立新, 等.月球着陆探测器发动机推力线测量及标定[J].火箭推进, 2013, 39(6):85-89.

LI X H, LI J, WANG L X, et al .. Measurement and calibration of thrust line of lunar lander engine[J]. Journal of Rocket Propulsion, 2013, 39(6):85-89. (in Chinese)

KUENTZMANN P. Introduction to solid rocket propulsion[R]. RTO-EN-023, 2004: 27-31.

来平安, 田维平, 余贞勇, 等.固体火箭发动机推力线横移和偏斜模拟计算[J].固体火箭技术, 1999, 22(1):35-38.

LAI P A, TIAN W P, YU ZH Y, et al .. Simulation calculation of the misalignment and deflection of thrust-line of solid rocket motor[J]. Journal of Solid Rocket Technology, 1999, 22(1):35-38. (in Chinese)

费涛, 曲继和, 翟江源, 等.基于磁悬浮试验架的固体火箭发动机侧向力测量研究[J].固体火箭技术, 2005, 28(4):308-311.

FEI T, QU J H, ZHAI J Y, et al .. Measurement research on side force of solid rocket motor based on magnetic suspension test fixture[J]. Journal of Solid Rocket Technology, 2005, 28(4):308-311. (in Chinese)

陈修平. 月面软着陆火箭发动机推力矢量测试系统研究[D]. 大连: 大连理工大学, 2013. http://cdmd.cnki.com.cn/Article/CDMD-10141-1013199883.htm

CHEN X P. Research on thrust vector measurement system for a lunar soft - landing rocket motor [D]. Dalian: Dalian University of Technology, 2013. (in Chinese)

QJ 3237-2005固体火箭发动机几何推力线偏斜和横移测量方法[S]. 2005.

QJ 3237-2005 Measurement method for geometrical thrust deviation and off-set of solid rocket motor[S]. 2005. (in Chinese)

张春富. 基于激光跟踪仪的固体火箭发动机推力线测量技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2007. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=D272523

ZHANG CH F. Study on the measuring technique of thrust line of solid rocket motor with laser tracker [D]. Harbin: Harbin Institute of Technology, 2007. (in Chinese)

王志军. 基于激光雷达测量原理的火箭推力线测量技术研究[D]. 长春: 长春理工大学, 2011. http://cdmd.cnki.com.cn/Article/CDMD-10186-1011232100.htm

WANG ZH J. Research on measurement technology of rocket thrust line based on the measurement principle of laser radar [D]. Changchun: Changchun University of Science and Technology, 2011. (in Chinese)

李伟森, 李蕾, 杜昌达.发动机推力线快速测量方法研究[J].宇航计测技术, 2012, 32(5):56-60.

LI W S, LI L, DU CH D. Research on a fast measurement method of engine thrust line[J]. Journal of Astronautic Metrology and Measurement, 2012, 32(5):56-60. (in Chinese)

LI L J, REN J J, YANG X, et al .. Study on digitized measuring technique of thrust line for rocket nozzle[J]. Precision Instrument and Mechanology, 2014, 3(1):153-158.

陶力, 杨再华, 阮国伟, 等.基于激光雷达的卫星发动机精度测量方法[J].航天器环境工程, 2013, 30(3):328-331.

TAO L, YANG Z H, RUAN G W, et al .. Alignment precision measurement method of satellite engine based on laser radar[J]. Spacecraft Environment Engineering, 2013, 30(3):328-331. (in Chinese)

柯映林, 李岸.基于主方向高斯映射的旋转面特征提取[J].浙江大学学报(工学版), 2006, 40(6):942-946.

KE Y L, LI A. Rotational surface extraction based on principal direction Gaussian image from point cloud[J]. Journal of Zhejiang University (Engineering Science), 2006, 40(6):942-946. (in Chinese)

汪子豪.从隧道三维点云中自动截取断面轮廓的方法[J].水利与建筑工程学报, 2015, 13(2):47-52.

WANG Z H. Automatic tunnel section cutting method by using 3D laser scanning point clouds[J]. Journal of Water Resources and Architectural Engineering, 2015, 13(2):47-52. (in Chinese)

蓝秋萍, 洪超, 林欢, 等.从三维点云中自动提取隧道几何特征线[J].测绘工程, 2015, 24(10):1-4, 10.

LAN Q P, HONG CH, LIN H, et al .. Automatical extraction geometric feature lines in the tunnel from 3D point cloud[J]. Engineering of Surveying and Mapping, 2015, 24(10):1-4, 10. (in Chinese)

HAN S, CHO H, KIM S, et al .. Automated and efficient method for extraction of tunnel cross sections using terrestrial laser scanned data[J]. Journal of Computing in Civil Engineering, 2013, 27(3):274-281.

KANG ZH ZH, ZHANG L Q, TUO L, et al .. Continuous extraction of subway tunnel cross sections based on terrestrial point clouds[J]. Remote Sensing, 2014, 6(1):857-879.

托雷, 康志忠, 谢远成, 等.利用三维点云数据的地铁隧道断面连续截取方法研究[J].武汉大学学报·信息科学版, 2013, 38(2):171-175, 185.

TUO L, KANG ZH ZH, XIE Y CH, et al .. Continuously vertical section abstraction for deformation monitoring of subway tunnel based on terrestrial point clouds[J]. Geomatics and Information Science of Wuhan University, 2013, 38(2):171-175, 185. (in Chinese)

朱宁宁.三维激光扫描在地铁隧道形变监测中的应用[J].测绘工程, 2015, 24(5):63-68.

ZHU N N. Application of 3D laser scanning to the subway tunnel deformation monitoring[J]. Engineering of Surveying and Mapping, 2015, 24(5):63-68. (in Chinese)

李珵, 卢小平, 朱宁宁, 等.基于激光点云的隧道断面连续提取与形变分析方法[J].测绘学报, 2015, 44(9):1056-1062.

LI CH, LU X P, ZHU N N, et al .. Continuously extracting section and deformation analysis for subway tunnel based on LiDAR points[J]. Acta Geodaetica et Cartographica Sinica, 2015, 44(9):1056-1062. (in Chinese)

李明磊, 张蕊, 李广云.激光扫描点云法矢精确计算与表面光顺方法[J].计算机辅助设计与图形学学报, 2015, 27(7):1153-1161.

LI M L, ZHANG R, LI G Y. Accurate normal calculating and surface smoothing of laser-scanned point clouds[J]. Journal of Computer-Aided Design & Computer Graphics, 2015, 27(7):1153-1161. (in Chinese)

高欣圆, 李明磊, 王力, 等.旋转形体点云轴线提取制约因素分析[J].测绘与空间地理信息, 2015, 38(2):35-37, 41.

GAO X Y, LI M L, WANG L, et al .. Limitations on axis extraction from point clouds of rotator[J]. Geomatics & Spatial Information Technology, 2015, 38(2):35-37, 41. (in Chinese)

隋立芬, 宋力杰, 柴洪洲.误差理论与测量平差基础[M].北京:测绘出版社, 2010.

SUI L F, SONG L J, CHAI H ZH. Error Theory and Foundation of Surveying Adjustment[M]. Beijing:Surveying and Mapping Press, 2010. (in Chinese)

浏览量

496

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

顾及最优分配和最佳掩码的点云部件分割

局部阈值自适应的地面点云分割

面向点云识别网络的显著图生成

局部相关点平衡的三维激光点云骨架提取

面向三维点云的场景识别方法综述