细胞三维动态培养微器件的设计与制作

刘冲; 刘涛; 魏娟; 江洋; 梅学翠; 李经民

doi:10.3788/OPE.20182607.1672

您当前的位置：

首页 >

文章列表页 >

细胞三维动态培养微器件的设计与制作

微纳技术与精密机械 | 更新时间：2020-08-13

- 细胞三维动态培养微器件的设计与制作
- Design and fabrication of three-dimensional dynamic cell culture micro-devices
- 光学精密工程 2018年26卷第7期页码：1672-1679
- 作者机构：
  
  1.大连理工大学辽宁省微纳米及系统重点实验室, 辽宁大连 116024
  2.厦门大学机电工程系, 福建厦门 361005
- 作者简介：
  
  [ "刘冲(1963-), 男, 四川成都人, 博士, 教授, 博士生导师, 1989年于华中科技大学获得硕士学位, 1993年于华南理工大学获得博士学位, 主要从事微机电工程领域的研究工作。E-mail: chongl@dlut.edu.cn" ]
  [ "李经民(1979-), 男, 辽宁抚顺人, 博士, 教授, 博士生导师, 2010年于大连理工大学获得博士学位, 2012年于博士后出站, 主要从事微机电工程、机电一体化、反求工程等方面的研究。E-mail:jingminl@dlut.edu.cn" ]
- 基金信息：
  
  国家自然科学基金资助项目(51475079);国家自然科学基金资助项目(51375076)
- DOI：10.3788/OPE.20182607.1672
  中图分类号： TB559;TN405
- 收稿日期：2018-01-03，
  
  录用日期：2018-2-15，
  
  纸质出版日期：2018-07-25
- 稿件说明：
移动端阅览
刘冲, 刘涛, 魏娟, 等. 细胞三维动态培养微器件的设计与制作[J]. 光学精密工程, 2018,26(7):1672-1679.

Chong LIU, Tao LIU, Juan WEI, et al. Design and fabrication of three-dimensional dynamic cell culture micro-devices[J]. Optics and precision engineering, 2018, 26(7): 1672-1679.
刘冲, 刘涛, 魏娟, 等. 细胞三维动态培养微器件的设计与制作[J]. 光学精密工程, 2018,26(7):1672-1679. DOI： 10.3788/OPE.20182607.1672.

Chong LIU, Tao LIU, Juan WEI, et al. Design and fabrication of three-dimensional dynamic cell culture micro-devices[J]. Optics and precision engineering, 2018, 26(7): 1672-1679. DOI： 10.3788/OPE.20182607.1672.

摘要

细胞培养是进行细胞研究的基础，为了在细胞体外培养时提供一种近似于体内的微环境，设计了一种可供细胞三维动态培养的微器件。首先设计了用于输运流体的微通道网络，培养池对称布置于微通道网络中，通过一系列"多进多出"型微通道分别与进样口和出样口相连。利用Comsol软件中的层流物理场和多孔介质物理场耦合对培养池内的流场进行仿真，通过比较流场的均一性和稳定性优化微通道网络结构。然后，采用静电直写技术在培养池内集成聚己内酯（PCL）三维支架，构建细胞三维培养空间。最后，封合微器件，检测微器件培养池内的流体流动情况，并进行细胞实验。实验结果表明，"2×2"型微器件培养池内的流体稳定性和均一性较好；PCL三维支架的纤维间距400

m，纤维直径80

m，孔隙率64%，细胞存活率达到90%以上。该细胞三维动态培养微器件更好地模拟了生物体内细胞生存所需的微环境，培养池内的细胞生长良好，满足设计要求。

Abstract

Cell culture is the basis of cell research. In order to provide an approximate microenvironment for cell culture

a micro-device for three-dimensional and dynamic cell culture was designed. First

a micro-channel network was designed for transportation of liquid. The cell culture chamber was symmetrically arranged in the micro-channel network. A series of "multiple input and multiple output" micro-channels were connected with the inlet and outlet of the cell culture chamber. Second

the physical fields of laminar and porous media in the COMSOL software were coupled

which was used to simulate the velocity of the liquid in the cell culture chamber of the micro-device. The network structure of micro-channels was optimized by comparing the homogeneity and stability of the flow field. Third

the electrohydrodynamic direct-writing technology was used to integrate polycaprolactone (PCL) three-dimensional scaffolds in the cell culture chamber

which constructed the three-dimensional culture space. Finally

after the welding of the micro-device

the fluid flow condition in the cell culture chamber of the micro-device was tested

and cell experiments were performed. The results show that the fluid stability and homogeneity in the cell culture chamber of a "2×2" micro-device are appropriate. The fiber spacing of the three-dimensional scaffolds is 400

the diameter is 80

and the porosity is 64%. Besides

the cell survival rate is more than 90%. The micro-device

which can be used for three-dimensional dynamic cell culture

precisely simulates the microenvironment needed for the survival of cells in vivo. Cells in the culturing chamber grew well; therefore

the micro-device can satisfy the design requirements.

关键词

Keywords

references

王洪成, 朱丽, 杨利军, 等.基于微流体脉冲惯性力驱动虾卵细胞的液滴包裹[J].光学精密工程, 2015, 23(10):286-290.

WANG H CH, ZHU L, YANG L J, et al .. Droplet-based encapsulating of shrimp oocyte actuated by microfluidic pulse inertial force[J]. Opt. Precision Eng ., 2015, 23(10):286-290.(in Chinese)

刘海侠, 刘冲, 魏娟, 等.新型网状通道微流控细胞培养芯片设计与制作[J].纳米技术与精密工程, 2017, 15(4):273-279.

LIU H X, LIU CH, WEI J, et al ..Design and fabrication of a novel microfluidic cell culture chip for mesh channel[J]. Nanotechnology and Precision Engineering , 2017, 15(4):273-279.(in Chinese)

马亚会, 刘冲, 魏娟, 等.稳定微环境微流控细胞培养芯片的设计与制备[J].纳米技术与精密工程, 2016, 14(4):246-250.

MA Y H, LIU CH, WEI J, et al ..Design and fabrication of microfluidic cell culture chipfor stable microenvironment[J]. Nanotechnology and Precision Engineering , 2016, 14(4):246-250.(in Chinese)

刘翀, 徐铭恩, 王玲, 等.基于3D打印细胞培养支架内部血管通道的模拟与构建[J].中国生物医学工程学报, 2017, 36(1):67-74.

LIU CH, XU M E, WANG L, et al ..Simulation and fabrication of vascular network in biological scaffolds based on three-dimensional cell printing technique[J]. Chinese Journal of Biomedical Engineering , 2017, 36(1):67-74.(in Chinese)

PAN T, SONG W J, GAO X D, et al ..3D bio-plotting of gelatin/alginate scaffolds for tissue engineering:influence of crosslinking degree and pore architecture on physicochemical properties[J]. Journal of Materials Science & Technology , 2016, 32:889-900.

WU Y, JYH F H, SUN J, et al . . Fabrication of 3D scaffolds via E-jet printing for tendon tissue repair[C]. ASME 2015 International Manufacturing Science and Engineering Conference , 2015.

林路遥, 林金明.微流控芯片上细胞培养与分析方法研究进展[J].分析科学学报, 2017, 33(5):707-714.

LIN L Y, LIN J M. Development of cell culture and analysis on microfluidic devices[J]. Journal of Analytical Science , 2017, 33(5):707-714.(in Chinese)

施镠佳, 谭映军, 董景新, 等.空间细胞培养芯片系统的弹性膜驱动样品更换[J].光学精密工程, 2015, 23(5):1340-1346.

SHI L J, TAN Y J, DONG J X, et al .. Elastic membrane actuated sample replacement for space cell culture microchips[J]. Opt. Precision Eng ., 2015, 23(5):1340-1346. (in Chinese)

ESCH E W, BAHINSKI A, HUH D. Organs-on-chips at the frontiers of drug discovery[J]. Nature Reviews Drug Discovery , 2015, 14(4):248-260.

王桐. 干细胞微流控芯片的设计、制备、检测与应用研究[D]. 北京: 北京工业大学, 2013. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=Y2447658

WANG T. Research on Design, Fabrication, Detection, Application of Microfluidic Bio-chips for Stem Cells [D]. Beijing: Beijing University of Technology Institute, 2013. (in Chinese)

PAUL J H, PHILIP J L, et al .. Continuous perfusion microfluidic cell culture array for high-throughput cell-based assays[J]. Biotechnol Bioeng , 2005, 89(1):1-8.

LI J M, WEI J, LIU Y C, et al ..A microfluidic design to provide a stable and uniform in vitro microenvironment for cell culture inspired by the redundancy characteristic of leaf areoles[J]. Lab on a Chip , 2017, 17:3921-3933.

范一强, 王玫, 张亚军. 3D打印微流控芯片技术研究进展[J].分析化学, 2016, 14(4):551-561.

FAN Y Q, WANG M, ZHANG Y J. Jun recent progress of 3D printed microfluidics technologies[J]. Chinese Journal of Analytical Chemistry , 2016, 14(4):551-561.(in Chinese)

卢泳庄, 任伊娜, 宫明华, 等.基于3D打印技术的微流控芯片及其初步药效筛选[J].中国药学杂志, 2015, 50(24):2124-2129.

LU Y ZH, REN Y N, GONG M H, et al ..3D-printing microfludicdevice for breast cancer cell culture and pharmacological research[J]. Chin. Pharm. J ., 2015, 50(24):2124-2129.(in Chinese)

KEN-ICHIRO K, YASUMASA M, YOSHIE K, et al ..3D printing of soft lithography mold for rapid production of polydimethyl siloxane-based microfluidic devices for cellstimulation with concentration gradients[J]. Biomed Microdevices , 2015, 10:17-36.

SARA C, GIUSEPPE N, MICHELE T, et al ..Direct writing of microfluidic footpaths by pyro-EHD printing[J]. ACS Applied Materials & Interfaces , 2017, 9:16488-16494.

ZHENG G F, SUN L L, WANG X, et al ..Electrohydrodynamic direct-writing microfiber patternsunder stretching[J]. Applied Physics A , 2016, 122(112):2-9.

刘军山, 张洋洋, 王忠, 等.用于细胞三维培养的集成微柱阵列的微流控芯片设计与验证[J].分析化学, 2016, 45(8):1109-1115.

LIU J SH, ZHANG Y Y, WANG ZH, et al .. Design and validation of a microfluidic chip with micropillar arrays for three-dimensional cell culture[J]. Chinese Journal of Analytical Chemistry , 2016, 45(8):1109-1115.(in Chinese)

马雅丽, 刘文开, 刘冲, 等. UV-LIGA技术在制作细胞培养器微注塑模具型腔中的应用[J].光学精密工程, 2013, 21(5):1229-1233.

MA Y L, LIU W K, LIU CH, et al .. Application of UV-LIGA technology to machining micro-injection mold cavity of cell culture device[J]. Opt. Precision Eng ., 2013, 21(5):1229-1233. (in Chinese)

浏览量

214

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

靶向药物浓度筛选微流控器件的设计与制作

三角形截面微流道中粒子惯性聚焦分离特性

低雷诺数高效类魔方结构微混合器

非对称截面螺旋流道中微粒的惯性聚焦效应

内置周期挡板的T-型微混合器