WHITEHOUSE D J. Surface metrology[J]. Measurement Science and Technology , 1997, 8(9): 955-972.

刘斌, 冯其波, 匡萃方.表面粗糙度测量方法综述[J].光学仪器, 2004, 26(5): 54-58.

LIU B, FENG Q B, KUANG C F. Survey of measurement methods for surf ace roughness[J]. Optical Instruments , 2004, 26(5): 54-5 8. (in Chinese)

蒋向前, Blunt L.三维表面测量的发展[J].工程设计, 2000, 7(4): 98-100.

JIANG X Q, BLUNT L. Advance in the three-dimensional surface metrology[J]. Engineering Design , 2000, 7(4): 98-100. (in Chinese)

ISO 25178-2 (2010). Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters. International Organization of Standardization[S].

DE GRIEVE D J, KALISZER H, ROWE G W. A normal wear process examined by measurements of surface topography[J]. Ann. CIRP , 1970, 18(4): 585-592.

CHIFFRE L D, NIELSEN H S. A digital system for surface roughness analysis of plane and cylindrical parts[J]. Precision engineering , 1987, 9(2): 59-64.

SHERRINGTON I, SMITH E H. Modern measurement techniques in surface metrology: part Ⅱ; optical instruments[J]. Wear , 1988, 125(3): 289-308.

DONG W P, SULLIVAN P J, STOUT K J. Comprehensive study of parameters for characterizing three-dimensional surface topography Ⅱ: Statistical properties of parameter variation[J]. Wear, 1993, 167(1): 9-21.

LEARCH R, GIUSCA C, HENNING A, et al .. ISO Definition of Resolution for Surface Topography Measuring Instruments [M]// OSTEN W. Berlin: Springer, 2014: 405-410.

NGUYEN A T, LEE BUTLER D. Correlation of grinding wheel topography and grinding performance: A study from a viewpoint of three-dimensional surface characterization[J]. Journal of Materials Processing Technology, 2008, 208(1-3):14-23.

ISO. ISO 25178-6: 2010. Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture. International Organization of Standardization[S]. Geneva: International Organization for Standardization, 2010.

中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. GB/T 33523.6-2017产品几何技术规范(GPS)表面结构区域法第6部分: 表面结构测量方法的分类[S].北京: 中国标准出版社, 2017.

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Standardization Administration of China. GB/T 33523.6-2017 Geometrical Product Specifications (GPS)-surface texture: areal-part 6: Classification of methods for measuring surface texture [S]. Beijing: Standards Press of China, 2017. (in Chinese)

李伯奎.触针式三维粗糙度测量仪的开发及应用[J].润滑与密封, 2006(4):140-142.

LI B K. Development and application of the roughness measuring instrument of stylus and three-dimensional[J]. Lubrication Engineering , 2006(4):140-142. (in Chinese)

李成贵, 董申. 3D表面粗糙度的测量方法分析[J].航空精密制造技术, 1999, 32(2): 36-40.

LI CH G, DONG SH. Length calculation method of welded rod blanks roughness[J]. Aviation Precision Manufacturing Technology , 1999, 32(2): 36-40. (in Chinese)

ABBOTT E J, FIRESTONE F A. Apparatus for determining roughness of surfaces: U.S. Patent 2, 048, 154[P]. 1936-7-21.

唐文彦, 张军, 李慧鹏.触针法测量表面粗糙度的发展及现状[C]//中国机械工程学会先进制造技术与齿轮学术会议, 2000. http://www.cnki.com.cn/Article/CJFDTotal-XXGY200011021.htm

TANG W Y, ZHANG J, LI H P. The development and current situation of surface roughness measured by contact method[C]// The Academic conference of Advanced Manufacturing Technology and gear of China Mechanical Engineering Society , 2000.(in Chinese)

WHITEHOUSE D J. Comparison between stylus and optical methods for measuring surfaces[J]. CIRP Annals, 1988, 37(2): 649-653.

STEDMAN M, LINDSEY K. Limits of surface measurement by stylus instruments[J]. SPIE , 1989, 1009: 56-62.

杨杰, 卢静, 王俊, 等.触针式三维粗糙度仪的设计[J].机械设计与制造, 2013(5): 29-31.

YANG J, LU J, WANG J, et al .. The design of three-dimensional roughmeter[J]. Machinery Design & Manufacture , 2013(5): 29-31.(in Chinese)

张也晗, 崔彤, 张扬, 等.表面粗糙度三维测量和评定的研究[J].计量与测试技术, 2012, 39(11): 31-32, 34.

ZHANG Y H, CUI T, ZHANG Y, et al .. Research of surface roughness three-dimensional measurement and evaluation[J]. Metrology & Measurement Technique , 2012, 39(11): 31-32, 34.(in Chinese)

BRUNING J H, HERRIOTT D R, GALLAGHER J E, et al .. Digital wavefront measuring interferometer for testing optical surfaces and lenses[J]. Applied optics , 1974, 13(11): 2693-2703.

常素萍.基于白光干涉轮廓尺寸与形貌非接触测量方法和系统[D].武汉: 华中科技大学, 2007. http://cdmd.cnki.com.cn/Article/CDMD-10487-2009033200.htm

CHANG S P. The Surface Shape and Profile Dimension Measurement Method and System Based on White-light Interferometric Technology [D]. Wuhan: Huazhong University of Science and Technology, 2007. (in Chinese)

WYANT J C, KOLIOPOULOS C L, BHUSHAN B, et al .. Development of a three-dimensional noncontact digital optical profiler[J]. Journal of Tribology , 1986, 108(1): 1-8.

KOLIOPOULOS C L. Interferometric Optical Phase Measurement Techniques [D]. Tucson: The University of Arizona, 1981.

WYANT J C, KOLIOPOULOS C L, BHUSHAN B, et al .. An optical profilometer for surface characterization of magnetic media[J]. ASLE transactions, 1984, 27(2): 101-113.

童晓蕾, 李玉和, 林浩山, 等.超精表面三维形貌相移干涉检测实验研究[J].电子测量与仪器学报, 2009, 23(12): 65-69.

TONG X L, LI Y H, LIN H SH, et al .. Research on phase-shifting interferometry contrast three-dimensional topography of ultra precision surface[J]. Journal of Electronic Measurement and lnstrument , 2009, 23(12): 65-69. (in Chinese)

KINO G S, CHIM S S C. Mirau correlation microscope[J]. Applied Optics , 1990, 29(26): 3775-3783.

DRESEL T, HÄUSLER G, VENZKE H. Three-dimensional sensing of rough surfaces by coherence radar[J]. Applied Optics , 1992, 31(7): 919-925.

HAEUSLER G, NEUMANN J. Coherence radar: an accurate 3D sensor for rough surfaces[J]. SPIE , 1993, 1822: 200-205.

CABER P J. Interferometric profiler for rough surfaces[J]. Applied Optics , 1993, 32(19): 3438-3441.

LEACH R K, BROWN L, JIANG X, et al .. Guide to the measurement of smooth surface topography using coherence scanning interferometry[R]. Measurement good Practice Guide No. 108. Hampton Road, Teddington, Middlesex: National Physical Laboratory, 2008: 17.

陈竹, 姜宏振, 刘旭, 等.数字全息术用于光学元件表面缺陷形貌测量[J].光学 精密工程, 2017, 25(3):576-583.

CHEN ZH, JIANG H ZH, LIU X, et al .. Measurement of surface defects of optical elements using digital holography[J]. Opt. Precision Eng ., 2017, 25(3):576-583. (in Chinese)

GABOR D. A new microscopic principle[J]. Nature , 1948, 161(4098): 777-778.

陈刚, 周文静, 胡祯, 等.表面粗糙度数字全息检测[J].应用光学, 2014, 35(6): 1040-1047.

CHEN G, ZHOU W J, HU ZH, et al .. Surface roughness measurement based on digital holography[J]. Journal of Applied Optics , 2014, 35(6): 1040-1047. (in Chinese)

COLOMB T, KVHN J, DEPEURSINGE C, et al .. Several micron-range measurements with sub-nanometric resolution by the use of dual-wavelength digital holography and vertical scanning[J]. SPIE , 2009, 7389: 73891H.

KIM M K. Digital Holographic Microscopy [M]. New York: Springer, 2011: 209-235.

MINSKY M. Confocal patent focal scanning microscope: US, 3013467[P]. 1957.

DAVIDOVITS P, EGGER M D. Scanning laser microscope for biological investigations[J]. Applied optics , 1971, 10(7): 1615-1619.

WINDECKER R, FLEISCHER M, TIZIANI H J. Low-coherence fiber-optic sensor with a large numerical aperture for topographic measurements[J]. Applied optics , 1998, 37(19): 4080-4083.

YANG L S, WANG G Y, WANG J G, et al .. Surface profilometry with a fibre optical confocal scanning microscope[J]. Measurement Science and Technology , 2000, 11(12): 1786-1791.

ARTIGAS R. Imaging confocal microscopy [M]// LEACH R. Optical Measurement of Surface Topography . Berlin, Heidelberg: Springer, 2011: 237-286.

XIAO G Q, CORLE T R, KINO G S. Real-time confocal scanning optical microscope[J]. Applied physics letters , 1988, 53(8): 716-718.

JORDAN H J, BRODMANN R, GRIGAT M, et al .. Quality assurance of HARMS and MOEMS surface structures using confocal white light microscopy[J]. SPIE, 2001, 4440: 51-58.

COHEN-SABBAN J, GAILLARD-GROLEAS J, CREPIN P J. Quasi-confocal extended field surface sensing[J]. SPIE, 2001, 4449: 178-183.

MOLESINI G, PEDRINI G, POGGI P, et al .. Focus-wavelength encoded optical profilometer[J]. Optics Communications , 1984, 49(4): 229-233.

BROWNE M A, AKINYEMI O, BOYDE A. Confocal surface profiling utilizing chromatic aberration[J]. Scanning , 1992, 14(3): 145-153.

MIURA K, OKADA M, TAMAKI J. Three-dimensional measurement of wheel surface topography with a laser beam probe[J]. Advances in Abrasive Technology, 2000, 3: 303-308.

MITSUI K. In-process sensors for surface roughness and their applications[J]. Precision Engineering , 1986, 8(4):212-220.

MASHIMO K, KITABAYASHI S, TANIMURA Y. Optical & noncontact measuring instrument for 3-D shape[J]. Journal of the Japan Society for Precision Engineering, 1993, 59(7):1091-1096.

YANG CH L, PU ZH B, ZHAO H J. Diffraction analysis and evaluation of a focus-error detection scheme for an optical profilometer[J]. SPIE, 2000:180-184.

FUKATSU H, YANAGI K. Development of an optical stylus displacement sensor for surface profiling instruments[J]. Microsystem Technologies, 2005, 11(8-10):582-589.

MIURA K, NOSE A. Point Autofocus Instruments[M]// LEACH R. Optical Measurement of Surface Topography . Berlin Heidelberg: Springer, 2011.

VON HELMHOLTZ H. Mechanism of Accommodation [M]// SOUTHALL J P C. Helmholtz's Treatise on Physiological Optics , New York: Optical Society of America, 1924.

DANZL R, HELMLI F, SCHERER S. Focus variation-a robust technology for high resolution optical 3D surface metrology[J]. Strojniski Vestnik/Journal of Mechanical Engineering, 2011, 57(3): 245-256.

HÄUSLER G, HECKEL W. Light sectioning with large depth and high resolution[J]. Applied Optics , 1988, 27(24): 5165-5169.

陈晓荣, 蔡萍, 施文康.光学非接触三维形貌测量技术新进展[J].光学 精密工程, 2002, 10(5):528- 532.

CHEN X R, CAI P, SHI W K. The latest development of optical non-contact 3D profile measurement[J]. Opt. Precision Eng ., 2002, 10(5):528-532. (in Chinese)

SCHMALTZ G. Technische Oberflächenkunde [M]. Berlin, Heidelberg: Springer, 1936.

ABOUELATTA O B. 3D surface roughness measurement using a light sectioning vision system[C]. Proceedings of World Congress on Engineering, International Association of Engineers , 2010: 698-703.

金守峰, 陈蓉, 范荻, 等.机加工表面粗糙度的光切显微成像测量方法与试验研究[J].制造业自动化, 2016, 38(4): 15-19.

JIN SH F, CHEN R, FAN D, et al .. Measurement and experiment of light-section microscope images on machined surface roughness[J]. Manufacturing Automation, 2016, 38(4): 15-19.(in Chinese)

崔凤奎, 宋战波, 王晓强, 等.三维表面粗糙度激光三角法测量原理研究[J].矿山机械, 2010, 38(14): 30-33.

CUI F K, SONG ZH B, WANG X Q, et al .. Study on principle of laser triangulation used for measurement of 3D surface roughness[J]. Mining & Processing Equipment, 2010, 38(14): 30-33. (in Chinese)

卢晋人, 黄元庆.激光三角法测量表面形貌[J].厦门大学学报:自然科学版, 2004, 43(1):50-53.

LU J R, HUANG Y Q. Laser triangulation method for surface measurement[J]. Journal of Xiamen University: Natural Science , 2004, 43(1):50-53. (in Chinese)

吴剑锋, 王文, 陈子辰.激光三角法测量误差分析与精度提高研究[J].机电工程, 2003, 20(5): 89-91.

WU J F, WANG W, CHEN Z CH. Study on the analysis for error in triangular laser measurement and the method of improving accuracy[J]. Mechanical & Electrical Engineering Magazine, 2003, 20(5): 89-91.(in Chinese)

常城, 张志峰.激光三角法测量的误差研究[J].中国科技信息, 2006 (23): 61-62, 64.

CHANG CH, ZHANG ZH F. Study on the error in triangular laser measurement[J]. China Science and Technology Information, 2006 (23): 61-62, 64.(in Chinese)

LONARDO P M, TRUMPOLD H, DE CHIFFRE L. Progress in 3D surface microtopography characterization[J]. CIRP Annals, 1996, 45(2): 589-598.

COLOMB T, KRIVEC S, HUTTER H, et al .. Digital holographic reflectometry[J]. Optics Express , 2010, 18(4):3719-3731.

MYSHKIN N K, GRIGORIEV A Y, CHIZHIKS A, et al .. Surface roughness and texture analysis in microscale[J]. Wear , 2003, 254(10): 1001-1009.

THIAN S C H, FENG W, WONG Y S, et al .. Dimensional measurement of 3D microstruture based on white light interferometer[C]// Proceedings of the 4th International Symposium on Instrumentation and Science and Technology , Chinese Society for Measurement, CIS, 2006: 1435.

YOUNG R D. Surface microtopography[J]. Physics Today , 1971, 24(11): 42.

SUGANUMA T. Measurement of surface topography using SEM with two secondary electron detectors[J]. Journal of Electron Microscopy , 1985, 34(4): 328-337.

BINNIG G, ROHRER H, GERBER C, et al .. Tunneling through a controllable vacuum gap[J]. Applied Physics Letters , 1982, 40(2): 178-180.

朱星.扫描近场光学显微镜[J].现代科学仪器, 1996(4):7-9.

ZHU X. Scanning near-field optical microscopy[J]. Modern Scientific Instruments , 1996(4):7-9.(in Chinese)

DVRIG U, POHL D W, ROHNER F. Near-field optical-scanning microscopy[J]. Journal of Applied Physics , 1986, 59(10):3318 - 3327.

BINNIG G, QUATE C F, GERBERr C. Atomic force microscope[J]. Physical Review Letters , 1986, 56(9): 930-933.

DE OLIVEIRA R R L, ALBUQUERQUE D A C, CRUZ T G S, et al .. Measurement of the nanoscale roughness by atomic force microscopy: basic principles and applications [M]// BELLITTO V. Atomic Force Microscopy-Imaging, Measuring and Manipulating Surfaces at the Atomic Scale. InTech, 2012.

MATHIA T G, PAWLUS P, WIECZOROWSKI M. Recent trends in surface metrology[J]. Wear , 2011, 271(3-4): 494-508.

周明宝, 林大键, 郭履容, 等.微结构表面形貌的测量[J].光学 精密工程, 1999, 7(3):7-13.

ZHOU M B, LIN D J, GUO L R, et al .. Measurement of microstructures topography[J]. Opt. Precision Eng ., 1999, 7(3):7-13. (in Chinese)

HAIDAR Y, DE FORNEL F, ZEROUKI C, et al .. Study of the roughness and optical near field of mass surface by using a SNOM with shear-force regulation[J]. SPIE, 2004, 5458:171-182.

NEMOTO K, YANAGI K, AKETAGAWA M, et al ..Development of a roughness measurement standard with irregular surface topography for improving 3D surface texture measurement[J]. Measurement Science and Technology , 2009, 20(8): 084023.

CONROY M, ARMSTRONG J. A comparison of surface metrology techniques[J]. Journal of Physics: Conference Series, 2005, 13(3): 458.

李剑白, 李达成, 李小芸, 等.原子力显微镜测试光学超光滑表面微轮廓的研究[J].光学学报, 2000, 20(11):1533-1537.

LI J B, LI D CH, LI X Y, et al .. Study on testing method for microprofile of optical supersmooth surface[J]. Acta Optica Sinica , 2000, 20(11):1533-1537. (in Chinese)

STOUT K J, SULLIVAN P J, DONG W P, et al .. The Development of Methods for the Characterisation of Roughness in Three Dimensions [M]. Birmingham: ECSC-EEC-EAEC, 1993.