精密定位系统的摩擦力建模与补偿

马立; 王敬萍; 李丰甜; 曾佑轩; 刘志龙

doi:10.3788/OPE.20192701.0121

您当前的位置：

首页 >

文章列表页 >

精密定位系统的摩擦力建模与补偿

微纳技术与精密机械 | 更新时间：2020-08-13

- 精密定位系统的摩擦力建模与补偿
- Friction modeling and compensation of precision position system
- 光学精密工程 2019年27卷第1期页码：121-128
- 作者机构：
  
  国家自然科学基金资助项目(No.61573238)；上海市自然科学基金资助项目(No.13ZR1415800)；上海市教育委员会科研创新基金资助项目(No.14YZ008)
- 作者简介：
  
  [ "马立(1979-)，女，黑龙江人，研究员，博士生导师，2007年于哈尔滨工业大学获得博士学位，现为上海大学机电工程与自动化学院教师，主要研究方向为微操作机器人技术。E-mail:malian@shu.edu.cn" ]
  [ "王敬萍(1994-)，女，上海人，硕士研究生，2016年于上海大学获得学士学位，主要研究方向为精密定位平台的控制与摩擦补偿。E-mail:1244780834@qq.com" ]
- 基金信息：
  
  国家自然科学基金(61573238);上海市自然科学基金资助项目(13ZR1415800);上海市教育委员会科研创新项目(14YZ008)
- DOI：10.3788/OPE.20192701.0121
  中图分类号： TP273; TH117
- 收稿日期：2018-05-02，
  
  录用日期：2018-6-21，
  
  纸质出版日期：2019-01-25
- 稿件说明：
移动端阅览
马立, 王敬萍, 李丰甜, 等. 精密定位系统的摩擦力建模与补偿[J]. 光学精密工程, 2019,27(1):121-128.

Li MA, Jing-ping WANG, Feng-tian LI, et al. Friction modeling and compensation of precision position system[J]. Optics and precision engineering, 2019, 27(1): 121-128.
马立, 王敬萍, 李丰甜, 等. 精密定位系统的摩擦力建模与补偿[J]. 光学精密工程, 2019,27(1):121-128. DOI： 10.3788/OPE.20192701.0121.

Li MA, Jing-ping WANG, Feng-tian LI, et al. Friction modeling and compensation of precision position system[J]. Optics and precision engineering, 2019, 27(1): 121-128. DOI： 10.3788/OPE.20192701.0121.

摘要

为了提高由直线电机驱动的精密定位系统的定位精度，建立了优化Stribeck摩擦模型，对摩擦力这一影响定位精度的主要因素进行补偿。首先，对于传统的Stribeck摩擦模型进行优化，采用改进的最小二乘算法对模型参数进行辨识。然后，对所建立的摩擦模型补偿算法进行仿真并与扰动观测器的补偿算法进行比较，发现前者速度比后者速度在补偿后提高了4.33%，对摩擦力具有更好的补偿效果。最后，在大行程二维精密定位平台上进行验证，根据平台能够达到的最大速度定义0.005 m/s为低速运动，0.05 m/s为高速运动，在这两种速度下进行实验，并与基于库仑摩擦前馈补偿模型比较。实验结果表明：精密定位平台在速度为0.005 m/s的低速运动时，优化模型的跟随误差减小了67.67%；在速度为0.05 m/s的高速运动时，优化模型的跟随误差减小了51.63%，验证了优化Stribeck摩擦模型补偿算法的有效性。本文提出的优化Stribeck摩擦模型可用于提高由直线电机驱动的精密定位系统的定位精度。

Abstract

To improve the positioning accuracy of a precise positioning system driven by a linear motor

the optimized Stribeck friction model was established that compensates for the main factors affecting the positioning accuracy of friction. First

the traditional Stribeck friction model was optimized. Second

the improved least square algorithm was used to identify the model parameters. Third

the friction model compensation algorithm was simulated and compared with the disturbance observer compensation algorithm. It is found that the speed of the former is 4.33% higher than that of the latter

and the friction compensation has a better compensation effect. Finally

the experiment was carried out on a two-dimensional precision positioning platform with large stroke according to the maximum speed of the platform; low and high speeds were defined as 0.005 and 0.05 m/s

respectively. Experiments were performed at these two speeds and compared with the Coulomb friction feed forward compensation model. The experimental results indicate that for the precision positioning platform at a low speed of 0.005 m/s

the proposed model tracking error is reduced by 67.67%; for a high-speed movement of 0.05 m/s

the proposed model tracking error is reduced by 51.63%

which verifies the validity of the improved Stribeck friction model compensation algorithm. The improved Stribeck friction model proposed in this paper can be used to improve the positioning accuracy of a precision positioning system driven by a linear motor.

关键词

Keywords

references

AHN H S, CHEN Y Q. State-dependent friction force compensation using periodic adaptive learning control[J]. Mechatronics , 2009, 19 (6): 896-904.

ASTROM K J, CANUDAS-DE-WIT C. Revisiting the LuGre friction model stick-slip motion and rate dependence[J]. IEEE Control Systems Magazine , 2008, 28(6): 101-114.

PENNESTR E, ROSSI V, SALVINI P, et al .. Review and comparison of dry friction force models[J]. Nonlinear Dynamics , 2015, 83(4): 1785-1801.

王延忠, 郭超, 贾树王, 等.基于Stribeck摩擦模型的盘式摩擦副稳定性分析[J].中国机械工程, 2017, 28(21):2521-2525.

WANG Y ZH, GUO CH, JIA SH W, et al.. Stability analysis of disc friction pairs based on Stribeck model[J]. China Mechanical Engineering , 2017, 28(21): 2521-2525. (in Chinese)

CONG S, DENG K, SHANG W, et al .. Isolation control for inertially stabilized platform based on nonlinear friction compensation[J]. Nonlinear Dynamics , 2015, 84(3): 1123-1133.

陈浩, 孟健, 安琦.直线电机滑台摩擦特性和摩擦模型[J].华东理工大学学报:自然科学版, 2017, 43(4):571-577.

CHEN H, MENG J, AN Q. Friction characterization and friction model of a linear-moter rolling-guide stage[J]. Journal of East China University of Science and Technology:Natural Science Edition , 2017, 43(4): 571-577. (in Chinese)

KATO H. Characteristic analysis on an extended dahl model for planar two-dimensional motion[J]. Journal of the Japan Society for Precision Engineering , 2017, 83(6):607-612.

于伟, 马佳光, 李锦英, 等.基于LuGre模型实现精密伺服转台摩擦参数辨识及补偿[J].光学精密工程, 2011, 19(11):2736-2743.

YU W, MA J G, LI J Y, et al.. Friction parameter identification and friction compensation for precision servo turning table[J]. Opt. Precision Eng. , 2011, 19(11): 2736-2743. (in Chinese)

晋超琼, 张葆, 李贤涛, 等.基于LuGre模型的航空光电稳定平台的摩擦力矩补偿[J].科学技术与工程, 2016, 16(30): 103-107.

JIN CH Q, ZHANG B, LI X T, et al.. Friction compensation of aerial photoelectrical stabilized platform based on the LuGre model[J]. Science Technology and Engineering , 2016, 16(30): 103-107. (in Chinese)

郭鹏飞, 邓永停, 王帅, 等.基于摩擦模型的反演滑模控制在大型望远镜上的应用[J].光学精密工程, 2017, 25(10):2620-2626.

GUO P F, DENG Y T, WANG SH, et al.. Backstepping sliding mode control of large telescope based on friction model[J]. Opt. Precision Eng. , 2017, 25(10): 2620-2626. (in Chinese)

YEH S S, SU H C. Development of friction identification methods for feed drives of CNC machine tools[J]. The International Journal of Advanced Manufacturing Technology , 2010, 52(1): 263-278.

姜振海, 徐思晨, 谷东伟, 等.基于区间分析理论的摩擦补偿研究[J].光学精密工程, 2017, 25(6):1519-1525.

JIANG ZH H, XU S CH, GU D W, et al.. Research on friction compensation based on interval analysis[J]. Opt. Precision Eng. , 2017, 25(6):1519-1525. (in Chinese)

曾德林, 肖凯, 林竹翀, 等.航空遥感惯性稳定平台LuGre摩擦参数的分步辨识[J].光学精密工程, 2016, 24(5):1148-1158.

ZENG D L, XIAO K, LIN ZH CH, et al.. Sub-step identification of LuGre friction parameters of inertially stabilized platform for airborne remote sensing[J]. Opt. Precision Eng. , 2016, 24(5):1148-1158. (in Chinese)

浏览量

281

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于灰狼算法的模块化关节摩擦辨识和补偿

连续转速状态下卫星反作用飞轮微振动参数识别

利用正交位移测量系统进行六自由度并联机构参数标定

压电驱动器迟滞非线性的分数阶建模及实验验证

压电微定位台的率相关动态迟滞建模及参数辨识