应用旋转法实现大口径非球面反射镜零重力面形加工

孟晓辉; 王永刚; 李文卿; 陈建丞; 周于鸣; 张继友

doi:10.3788/OPE.20192712.2517

您当前的位置：

首页 >

文章列表页 >

应用旋转法实现大口径非球面反射镜零重力面形加工

现代应用光学 | 更新时间：2020-07-09

- 应用旋转法实现大口径非球面反射镜零重力面形加工
- Fabrication of zero-gravity surface for large-aperture aspherical mirror by using rotationally method
- 光学精密工程 2019年27卷第12期页码：2517-2524
- 作者机构：
  
  北京空间机电研究所国防科技工业光学超精密加工技术创新中心(先进制造类)，北京 100094
- 作者简介：
  
  [ "孟晓辉(1985-)，男，河北灵寿人，高级工程师，2010年于中科院南京天文光学技术研究所获得硕士学位，主要从事光学超精密制造及检测等工作的研究。E-mail：mrmeng_508@163.com" ]
  [ "王永刚(1982－)，男，江苏盐城人，研究员，2010年于中科院长春光机所获得博士学位，主要从事大口径空间反射镜超精密制造及高精度测试技术的研究。E-mail：vangernh@126.com" ]
- 基金信息：
  
  国防十三五技术基础科研计划资助项目(JSZL2017203B009)
- DOI：10.3788/OPE.20192712.2517
  中图分类号： TH706
- 收稿日期：2019-07-12，
  
  录用日期：2019-9-10，
  
  纸质出版日期：2019-12-25
- 稿件说明：
移动端阅览
孟晓辉, 王永刚, 李文卿, 等. 应用旋转法实现大口径非球面反射镜零重力面形加工[J]. 光学精密工程, 2019,27(12):2517-2524.

Xiao-hui MENG, Yong-gang WANG, Wen-qing LI, et al. Fabrication of zero-gravity surface for large-aperture aspherical mirror by using rotationally method[J]. Optics and precision engineering, 2019, 27(12): 2517-2524.
孟晓辉, 王永刚, 李文卿, 等. 应用旋转法实现大口径非球面反射镜零重力面形加工[J]. 光学精密工程, 2019,27(12):2517-2524. DOI： 10.3788/OPE.20192712.2517.

Xiao-hui MENG, Yong-gang WANG, Wen-qing LI, et al. Fabrication of zero-gravity surface for large-aperture aspherical mirror by using rotationally method[J]. Optics and precision engineering, 2019, 27(12): 2517-2524. DOI： 10.3788/OPE.20192712.2517.

摘要

为了在地面制造环境下实现大口径空间非球面反射镜的零重力面形加工，建立了基于重力卸载的高精度旋转检测工艺方法。首先对

次等间隔旋转法的基本原理进行了介绍，并结合一块

1 290 mm ULE材料的非球面反射镜加工实例，分别给出了旋转法实施环节中的旋转角度和偏心误差控制方法，实际角度误差和偏心误差分别优于0.1°和0.1 mm。然后，在低精度阶段采用了3次旋转法对检测结果进行处理，主镜面形精度快速收敛至0.029

-RMS；同时由于应用旋转法而导致镜面上的对称性误差累积放大，进行了针对性去除，面形精度进一步收敛至0.023

-RMS。最后，采用了6次旋转法对检测结果进行处理并指导光学加工，反射镜6个方向下的实测面形精度为0.012

-RMS，去除重力变形误差后面形精度达到了0.010

-RMS，该面形可以认为是卫星入轨后零重力空间环境下的反射镜面形。文中所述加工工艺方法不仅适用于米级口径，还适用于更大口径空间非球面反射镜零重力面形的高精度加工。

Abstract

To acquire the zero-gravity surface figure error of an aspherical mirror in a ground fabricating environment

a high-precision rotation method based on gravity compensation technology was established. First

the basic principle of the

equal interval rotation method is introduced. Second

combined with an aspheric ultra low expansion (ULE) mirror with a diameter of

1 290 mm processing

the rotation angle and off-center control methods are given

respectively

and the angle error and off-center error are better than 0.1° and 0.1 mm

respectively. Third

in the low-precision stage

the rotation result is processed by three-position rotations and the surface accuracy of the mirror quickly converges to 0.029

-RMS. At the same time

the symmetry error on the mirror surface is cumulatively amplified due to the application of the rotation method. After removal

the surface accuracy further converges to 0.023

-root mean square (RMS). Finally

the six-position rotations are used to guide the optical manufacturing. The surface figure error of the mirror in the six directions is 0.012

-RMS and 0.010

-RMS by removing the gravity deformation error

which allows it to be considered as a zero-gravity mirror in the space environment after the satellite is in orbit. The method described in the studyis not only applicable to the fabrication of one meter-level mirrors

but also to larger space aspheric mirrors with the goals of a zero-gravity surface figure error.

关键词

Keywords

references

刘振宇, 李龙响, 曾雪峰, 等.大口径非球面反射镜误差分离组合加工技术[J].光学精密工程, 2017, 25(4): 281-287.

LIU ZH Y, LI L X, ZENG XU F, et al .. Fabrication of large aspheric mirror using multi-mode polishing based on error separation [J]. Opt.Precision Eng. , 2017, 25(4): 281-287. (in Chinese)

王小勇.空间光学技术发展与展望[J].航天返回与遥感, 2018, 39(4): 79-86.

WANG X Y. Development and prospect of space optical technology [J]. Spacecraft Recovery & Remote Sensing , 2018, 39(4): 79-86. (in Chinese)

郭疆, 朱磊, 赵继, 等.大口径空间反射镜大容差支撑结构设计与优化[J].光学精密工程, 2019, 27(5): 1138-1145.

GUO J, ZHU L, ZHAO J, et al .. Design and optimize of high tolerance support structure for large aperture space mirror [J]. Opt.Precision Eng. , 2019, 27(5): 1138-1145. (in Chinese)

张珑, 叶璐, 张金平, 等. 1.2 m轻量化空间反射镜的重力支撑变形分离[J].光子学报, 2018, 47(7): 0722002-1-0722002-6.

ZHANG L, YE L, ZHANG J P, et al ..Gravity and support error of separation of 1.2 m lightweight space mirror [J]. Acta Photonica Sinica , 2018, 47(7): 0722002-1-0722002-6. (in Chinese)

宋伟红, 伍凡, 侯溪.基于单次旋转的旋转非对称面形误差绝对检测技术研究[J].光学学报, 2012, 32(8): 0812006_1-0812006-6.

SONG W H, WU F, HOU X. Study on the absolute testing of rotationally asymmetric surface deviation with the method of single rotation [J]. Acta Optica Sinca , 2012, 32(8): 0812006-1-0812006-6. (in Chinese)

CHRIS J E, ROBERT N K. Test optics error removal [J]. Appl.Opt. , 1996, 35(7) : 1015-1021.

KLAUSR R F. Absolute interferometric testing based on reconstruction of rotational shear [J]. Appl.Opt ., 2001, 40(10): 1637-1648.

MARUIZIO V, GIUSEPPE M. Iterative algorithm for three flat tests [J]. Opt.Express , 2007, 15(11): 6809-6816.

PARKS P E. Removal of test optics errors [J]. SPIE , 1978, 153: 56-63.

王昀, 李凌, 谷振宇, 等. "高分四号"卫星相机镜头像质检验技术[J].航天返回与遥感, 2016, 37(4): 80-86.

WANG Y, LI L, GU ZH Y, et al .. Image quality checkout technique for optical camera of GF-4 satellite [J]. Spacecraft Recovery & Remote Sensing , 2016, 37(4): 80-86. (in Chinese)

杨利伟, 李志来, 薛栋林, 等.应用方位反向技术提取反射镜零重力面形[J].中国光学, 2016, 9(5): 606-612.

YANG L W, LI ZH L, XUE D L, et al .. Extracting zero-gravity surface figure of mirror by orientation reversal [J]. Chinese Optics , 2016, 9(5): 606-612. (in Chinese)

张艳微, 苏东奇, 隋永新, 等.基于旋转平均补偿算法的旋转非对称面形绝对检测[J].中国激光, 2014, 41(7): 0708007-1-0708007-6.

ZHANG Y W, SU D Q, SUI Y X, et al .. Absolute testing of rotationally asymmetric surface deviation with the method of rotation-averaging and compensation [J]. Chinese Journal of Lasers , 2014, 41(7): 0708007-1-0708007-6.(in Chinese)

韩冬松, 何昕, 魏仲慧, 等.应用高精度旋转法的干涉仪检测误差校正[J].光学精密工程, 2015, 23(5): 1297-1303.

HAN D S, HE X, WEI ZH H, et.al.. Error correction of interferometer detection with high-accuracy rotation method [J]. Opt.Precision Eng. , 2015, 23(5): 1297-1303. (in Chinese)

浏览量

143

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

眼镜镜片尖边轮廓的五轴数控加工

全口径环形抛光的光学元件面形误差影响因素及其控制

非回转对称次波前退化下的干涉相干成像像差

稳定X轴的刀具圆弧Z向补偿差值迭代法

大离轴量非球面反射镜的加工方法