用于精密坐标传递的二联激光跟踪仪系统

郭迎钢; 赵文斌; 杜涵文; 王志颖

doi:10.3788/OPE.20202801.0030

您当前的位置：

首页 >

文章列表页 >

用于精密坐标传递的二联激光跟踪仪系统

现代应用光学 | 更新时间：2020-08-13

- 用于精密坐标传递的二联激光跟踪仪系统
- Two-laser-tracker system for precise coordinates transmission
- 光学精密工程 2020年28卷第1期页码：30-38
- 作者机构：
  
  1.战略支援部队信息工程大学，河南郑州 450001；
  2.中国科学院上海高等研究院，上海 201800
- 作者简介：
  
  [ "郭迎钢(1992-)，男，甘肃武威人，博士研究生，2014年、2017年于解放军信息工程大学分别获得学士、硕士学位，主要从事精密工程测量，特别是三维工程控制网建立的研究。E-mail:fariel_gyg@163.com" ]
- 基金信息：
  
  国家自然科学基金资助项目(41974216)
- DOI：10.3788/OPE.20202801.0030
  中图分类号： P258
- 收稿日期：2019-07-23，
  
  录用日期：2019-10-22，
  
  纸质出版日期：2020-01-25
- 稿件说明：
移动端阅览
郭迎钢, 赵文斌, 杜涵文, 等. 用于精密坐标传递的二联激光跟踪仪系统[J]. 光学精密工程, 2020,28(1):30-38.

Ying-gang GUO, Wen-bin ZHAO, Han-wen DU, et al. Two-laser-tracker system for precise coordinates transmission[J]. Optics and precision engineering, 2020, 28(1): 30-38.
郭迎钢, 赵文斌, 杜涵文, 等. 用于精密坐标传递的二联激光跟踪仪系统[J]. 光学精密工程, 2020,28(1):30-38. DOI： 10.3788/OPE.20202801.0030.

Ying-gang GUO, Wen-bin ZHAO, Han-wen DU, et al. Two-laser-tracker system for precise coordinates transmission[J]. Optics and precision engineering, 2020, 28(1): 30-38. DOI： 10.3788/OPE.20202801.0030.

摘要

为了实现受限空间内的精密坐标传递，建立了二联激光跟踪仪测量系统，并设计了其施测及数据处理方法。首先，对Leica AT402激光跟踪仪进行改装，在其提手上安装能够放置球棱镜的靶座，并精确标定球棱镜中心与仪器中心的高差，称它为垂向偏心差。然后，两台激光跟踪仪自由设站，双面互瞄对方提手上的球棱镜，并依据垂向偏心差将互瞄观测值改化至仪器中心，得到仪器中心之间的互瞄观测值。两台仪器分别测量可视范围内的目标点，当两台仪器能够观测到足够数量的公共点时，可利用公共点和互瞄观测值共同传递坐标和方位；当无公共点时，可利用激光跟踪仪之间的互瞄观测值传递坐标和方位。在上海光源的工程控制网内开展了测量实验，结果表明：当相邻测站有公共点时，该系统能提高坐标转换的精度；当无公共点时，在9 m的距离上，坐标传递精度优于0.22 mm，定向旋转角精度接近1″。该系统可应用于三维工程控制网的测量，尤其适用于通视条件差的精密坐标传递场景。

Abstract

In this work

a two-laser-tracker system was developed

and its measuring and data processing methods were designed to precisely transmit coordinates in a limited space.First

two Leica AT402 laser trackers were modified

and two target seats were respectively installed on their handles to place spherical prisms. Thereafter

the height difference between the adapter center and instrument center was precisely calibrated as vertical eccentricity. Furthermore

the two laser trackers set up survey stations and aimed at the sphere prism on the handle of the other instrument. The observed values should be adjusted to the instrument centers considering the vertical eccentricity to obtain the aiming interaction observation between the instrument centers. Moreover

the two instruments measured the target points in the visible range. When the two laser trackers could observe sufficient common points

the common points and the aiming interaction observation could be used to transmit coordinates and orientation simultaneously. When there was no common point

the aiming interaction observation was utilized to transmit the coordinates and orientation. Measurement experiments were carried out in the engineering control network of the Shanghai Synchrotron Radiation Facility. The experimental results show that when there are enough sufficientpoints in adjacent stations

the accuracy of coordinate transmission can be improved using the aiming interaction observation. When there is no common point

at 9 m

the precision of transmitted coordinate accuracy is better than 0.22 mm

and the precision of the directional rotation angle is approximately 1″. This system can be applied to the measurement of a three-dimensional control network

and is especially suitable for precise coordinate transmission inpoor visibility conditions.

关键词

Keywords

references

OGUNDARE J O. Precision Surveying: The Principles and Geomatics Practice [M]. Hoboken: John Wiley & Sons, Inc., 2016.

李广云, 范百兴.精密工程测量技术及其发展[J].测绘学报, 2017, 46(10): 1742-1751.

LI G Y, FAN B X. The development of precise engineering surveying technology [J]. Acta Geodaetica et Cartographica Sinica , 2017, 46(10): 1742-1751. (in Chinese)

李广云, 李宗春.工业测量系统原理与应用[M].北京:测绘出版社, 2011.

LI G Y, LI Z CH. The Principles and Applications of Industrial Measuring System [M]. Beijing: Surveying and Mapping Press, 2011. (in Chinese)

范百兴, 李广云, 易旺民, 等.激光跟踪仪测量原理与应用[M].北京:测绘出版社, 2017.

FAN B X, LI G Y, YI W M, et al .. The Measurement Principle and Application of Laser Tracker [M]. Beijing:Surveying and Mapping Press, 2017. (in Chinese)

于成浩.三维准直测量技术在上海光源中的应用研究[D].上海: 中国科学院上海应用物理研究所, 2008.

YU CH H. The Application Research of 3D Survey and Alignment Technique in SSRF [D]. Shanghai: Shanghai Institute of Applied Physics, Chinese Academy of Sciences, 2008. (in Chinese)

聂海滨.基于激光跟踪仪的大型设备精密测量关键技术研究[D].武汉: 武汉大学, 2017.

NIE H B. Research on the Key Techniques of Precision Metrology for Large-scale Equipments Based on Laser Tracker [D].Wuhan: Wuhan University, 2017. (in Chinese)

梁静, 王铜, 董岚.基于长度标准装置提高激光跟踪仪测量精度的方法[J].大地测量与地球动力学, 2019, 39(3): 325-330.

LIANG J, WANG T, DONG L. Method to improve the measurement accuracy of laser tracker based on the length standard device [J]. Journal of Geodesy and Geodynamics , 2019, 39(3): 325-330. (in Chinese)

范斌, 季青松, 李明飞, 等. iGPS测量系统与激光跟踪仪在某飞机大部件数字化装配中的对比应用[J].航空制造技术, 2019, 62(5): 57-62.

FAN B, JI Q S, LI M F, et al .. iGPS and laser tracker applications comparison in digital assembly of large aircraft parts [J]. Aeronautical Manufacturing Technology , 2019, 62(5): 57-62. (in Chinese)

梁静, 董岚, 罗涛, 等. BEPCII储存环激光跟踪仪测量精度统计及先验误差的确定[J].测绘科学, 2013, 38(6): 182-184.

LIANG J, DONG L, LUO T, et al .. Precision statistics of laser tracker in BEPCII storage ring and calculation of mean square error of unit weight [J]. Science of Surveying ang Mapping , 2013, 38(6):182-184. (in Chinese)

李方, 邹进贵, 王铜, 等.粒子直线加速器精密三维控制网研究[J].地理空间信息, 2018, 16(2): 87-89, 110.

LI F, ZOU J G, WANG T, et al .. Research on precise 3D control network of particle linac[J]. Geospatial Information, 2018, 16(2): 87-89, 110. (in Chinese)

MOISIEIENKO M, ZELINSKY A, MYTSYKOV A, et al .. NSC KIPT experience in use of laser tracker Leica at 401 in equipment alignment of 100 mev/100 kw electron linear accelerator of "Neutron Source" driver [C]// Proceedings of IPAC2017, Copenhagen, Denmark, 2017: 4604-4606.

YUAN J D, HE Y, ZHANG B, et al .. Alignment of beam position monitors in cryomodule of CADS injector Ⅱ [J]. Nuclear Science and Techniques, 2017, 28(6):75.

杨凡.加速器准直测量控制网建立的理论与方法[D].郑州: 解放军信息工程大学, 2014.

YANG F. Theories and Methods of Control Network on Accelerator [D]. Zhengzhou: The PLA Information Engineering University, 2014. (in Chinese)

刘娇月, 杨聚庆, 董登峰, 等.激光跟踪仪的光电瞄准与定位系统[J].光学精密工程, 2015, 23(6): 1558-1564.

LIU J Y, YANG J Q, DONG D F, et al .. Optoelectronic aiming and orientation system of laser tracker [J]. Opt. Precision Eng ., 2015, 23(6):1558-1564. (in Chinese)

李辉, 刘巍, 张洋, 等.激光跟踪仪多基站转站精度模型与误差补偿[J].光学精密工程, 2019, 27(4): 771-783.

LI H, LIU W, ZHANG Y, et al .. Model establishment and error compensation of laser tracker station-transfer [J]. Opt. Precision Eng ., 2019, 27(4): 771-783. (in Chinese)

赵子越, 甘晓川, 马骊群.一种基于多传感系统协同测量的联合平差组网方法[J].传感技术学报, 2019, 32(1):100-105.

ZHAO Z Y, GAN X CH, MA L Q. A combined adjustment network method based on multi-sensor system cooperative measurement[J]. Chinese Journal of Sensors and Actuators , 2019, 32(1):100-105. (in Chinese)

任瑜, 刘芳芳, 张丰, 等.激光跟踪仪多边测量的不确定度评定[J].光学精密工程, 2018, 26(10):2415-2422.

REN Y, LIU F F, ZHANG F, et al .. Evaluation of uncertainty in multilateration with laser tracker[J]. Opt. Precision Eng ., 2018, 26(10): 2415-2422. (in Chinese)

李丽娟, 赵延辉, 林雪竹.加权整体最小二乘在激光跟踪仪转站中的应用[J].光学精密工程, 2015, 23(9): 2570-2577.

LI L J, ZHAO Y H, LIN X ZH. Application of WTLS in coordinate transformation of laser tracker[J]. Opt. Precision Eng ., 2015, 23(9): 2570-2577. (in Chinese)

林嘉睿, 孟伟, 杨凌辉, 等.激光跟踪仪的双面互瞄定向[J].光学精密工程, 2017, 25(10): 2752-2758.

LIN J R, MENG W, YANG L H, et al .. Two-face reciprocal orientation for laser tracker[J]. Opt. Precision Eng ., 2017, 25(10): 2752-2758. (in Chinese)

ALLAN A L. The principles of theodolite intersection systems[J]. Survey Review , 1988, 29(227): 226-234.

浏览量

339

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

激光跟踪仪的双面互瞄定向

激光跟踪仪主动对准式复合传感高精度姿态测量

二维激光跟踪转台轴系设计及动态形变误差修正

激光跟踪仪几何结构误差标定及修正

基于深度学习和PnP模型的激光跟踪仪自动姿态测量