Chinese Version Light学术出版中心
Latest Issue
Issue 4 ， 1989
-
Pounding and Responsing from CAD/CAM
Abstract：The situation lashed by CAD/CAM tide and the countermeasure adopted by some countries are mentioned briefly in this paper. It shows the urgency and necessity to earry out CAD/CAM technology.- 35
- |
- 6
- |
- 0
Published：2020-08-12 -
Concept Design
Abstract：Concept design is one of the CAD techniques. Its task, contents and method are described in this paper. Also the advantages and draw- backs of concept design in engineering applications are discussed.Its practical applications are illustrated by 3 examples.- 50
- |
- 7
- |
- 0
Published：2020-08-12 -
Concept Design of Remote-Sensing Camera
Abstract：Concept design of a remote-sensing camera is described according to the CAD technique. Its design method and application in optical syst- em, mechanical structure and complex components in a CCD remote-sensing camera, by showing various wireframes and shading pictures, are presented. A reasonable design of a camera truss structure is analyzed and a practical model of the CCD remote-sensing camera is given.- 45
- |
- 10
- |
- 0
Published：2020-08-12 -
Computer-Aided Engineering Analysis of Space Remote-Sensing Camera Structure
Abstract：In order to meet the tight design requirement of space remotesensing camera it is necessary to investigate the complex variation of the- concentricity and optical path difference in the optical system due to temperature, gravitation and random excitation. Different schemes of the camera structures have been analysed and compared by means of Computer-Aided Engineering Analyses. Displacements and deformations of the camera structure, due to the effects of temperature and gravitation, have been calculated separately and the variation of the concentricity and optical path difference in the optical system is given. The dynamic response RMS under random excitation spectrum is estimated. By several design-analysis iteration the optimum scheme and structure have-been obtained.- 43
- |
- 8
- |
- 0
Published：2020-08-12 -
Numerical Method for Opto-Mechanical System Design
Abstract：This paper describes a simulation design method which is based on the background of overall opto-mechanical design and uses available Thermal Analysis Program (TAP), Structural Analysis Program (SAP) and Optical Design Program (ODP). A software package based on the integraty principle is developed, by which the performance of opto-mechanical systems with the effects of thermal and mechanical load can be predicted.- 48
- |
- 7
- |
- 0
Published：2020-08-12 -
Computer Aided Engineering Analysis and Optimum Design
Abstract：This paper deals With the technology of computer aided engineering analysis and optimum design,the importance of which in CAD system is also described with the emphasis on the general method of computer aided engineering analysis and optimum design and with a practical example.- 65
- |
- 7
- |
- 0
Published：2020-08-12 -
Application of E-CAD in PCBD
Abstract：The application of E-CAD in PCBD is described in this paper with an example of T-BOARD and SECMAI programs.- 44
- |
- 6
- |
- 0
Published：2020-08-12 -
Creation of PCBD Engineering Databsae
Abstract：This paper deals with the creation rule of integrated database in PCBD and some examples are also described.- 31
- |
- 7
- |
- 0
Published：2020-08-12 -
Development of a Shoe's Computer Aided Design and Processing System
Abstract：This paper deals with the necessity and feasibility of shoe's computer aided design and processing. The related configuration and functions of the computer system have been mentioned and technological implement scheme has been discussed in detail.The analysis on economical and social benefits has also been estimated. It shows that in order to meet the increasing need the S-CADM system should be repidly equipped with at the available manufacturers.- 35
- |
- 6
- |
- 0
Published：2020-08-12 -
A Computer Aided Shoe Pattern 3-D Design Software System
Abstract：This system supported by the general drawing program S-7k is carried out at Apllo DN3000 work-station. By means of space cttrve and curved-surface fitting, the 3D shoe pattern and upper are constructed in the shoe tree model space interactively. Varied vamps can be picked up from shoe pattern library and then be put together on the surface of shoe tree. Based on such a way the shoe style design can be corupleted and the 3D shoe pattern picture can also be generated.- 46
- |
- 6
- |
- 0
Published：2020-08-12 -
Shoe's 3D Design and 2D Deploying
Abstract：Macroscopic process of shoe's 3D design and 2D deploying, by means of CAD,has been described, and the 3D shoe core and its deploying are depicted in detail. Some other development methods for shoe patch or both core and patch have also been introduced briefly.- 39
- |
- 7
- |
- 0
Published：2020-08-12 -
The CAD Nesting Technology of Shoe Pattern in the S-CADM System
Abstract：By means of some examples of particular vamps and soles, the CAD nesting technology of shoe pattern in the S-CADM system is introduced. The principle and practical methods of the process, including the establishment and retrieve of the data library for the figures of raw material and uppers,the manual and semi-auto nesting and the estimations of nesting rate,are described.- 46
- |
- 9
- |
- 0
Published：2020-08-12 -
Computer Simulation Analysis for Shoe-Tree Operation
Abstract：This paper briefly introduced the simulation and analysis routine of the graver-machine in tbe S-CADM system.The design scheme is inspected and the regular pattern of its operating is illustrated, and a lot of the working data is proyided for implement.- 43
- |
- 6
- |
- 0
Published：2020-08-12 -
Interface Software for Graphics and Finite Element Analysis Program
Abstract：This paper briefly introduces, by some examples, the advanced gra- phic software S7K and the interface software IGFEA for the finite element analysis program SAP6, including the development, guiding id- eology, functions, general structure and flow diagram.- 45
- |
- 6
- |
- 0
Published：2020-08-12 -
The Application of POST Program in CAE System
Abstract：This paper introduces the necessity of developing the POST Program of finite element, including its features, functions and drawbacks,with the emphasis on the transplantation and improyement of POST program.- 34
- |
- 5
- |
- 0
Published：2020-08-12 -
The Application of Redeveloped Software for the Non-Standard Equipment Design Based on the Introduced CAD Package
Abstract：China Aeronautical Project and Design Institute (CAPDI) had introduced a CAD software from Auto-trol Corporation in USA by the end of 1986.According to the work properties of CAPDI some application software packages, such as Mechanical Design, S7K Chinese Characters, Power Lighting, Architecture, HVAC etc., have been developed in succession since 1986. So far the software packages have played an important role in these special design fields. It is necessary to redevelop this foreign CAD technology for our application to the non-standard equipment. During this process the common parts usually found in mechanical design have been concluded and summarised. By using the Application Interface (AI) of S7K supporting-software the Mechanical Design Software has been organically added into S7K, which contains the Standards of China Mechanical Design and Chinese Characters. Because these application softwares developed are used for professional jobs they are convenient to use and easy to learn. It not only greatly increases the working efficiency, but also powerfully ensures the design quality.- 58
- |
- 5
- |
- 0
Published：2020-08-12 -
CAT Technology for Large Optical Instruments
Abstract：This paper mainly describes some fundamental problems of Testing Modal Analysis Technology by means of CAT,including the relationship between CAD and CAT,necessity of CAT research and some tentative ideas of carrying out CAT in our Institute.- 36
- |
- 7
- |
- 0
Published：2020-08-12 -
CAD/CAM Technology and Shoe Tree CAM System
Abstract：This paper presents a survey of development on CAD/CAM technology.By taking the shoe tree-carving machine as an example the way of implementation for CAD/CAM technology is introduced.- 39
- |
- 6
- |
- 0
Published：2020-08-12
Loading...
0