Chinese Version Light学术出版中心
Latest Issue
Issue 6 ， 1996
-
CAD/CAE/CAM Technique
Abstract：This paper describes the application and characters of CAD/CAE/CAM technology which used in the R & D of space optical instrument,and takes space remote camera as an example to state the effectiveness of using CAD/CAE/CAM technology in the life of R & D.Keywords：CAD;CAE;CAM;space optical instrument;Concurrent engineering- 30
- |
- 5
- |
- 9
Published：2020-08-12 -
Computer Aided Develop of Laser Cooperative Targets
Abstract：This paper presents the course of develop of laser cooperative targets and acquired achievements in relative works briefly.There is consultation value to consumers and follow up designers.Keywords：Corner reflector;Laser cooperative targets;Blind area;Reliability design;Laser radar cross section;CAD- 45
- |
- 7
- |
- 1
Published：2020-08-12 -
Application of Mechanisms in Optics,Fine Mechanics and Electronics
Abstract：The function and concept of Mechanism-A new CAD technology application has been introduced in this paper.The complicated mechanisms such as trasfer film system on space camera have been kinematic analysed,simulated and animated,which privided scientific basis for designing the products of optics,fine mechanics and electronics.Keywords：Mechanism;Link;Joint;Animation- 36
- |
- 6
- |
- 4
Published：2020-08-12 -
Integrated Design for Space Optical Instrument
Abstract：In this paper,a new thought of integrated design method of the thermal/structural/optical system for spatial optical instrument is presented,and the advantages of this method are explained.Also,a newly designed spatial camera with this method is shown as an example to demonstrate the wide use of this integrated design approach in the engineering practice.Keywords：Integrated design;Thermal design- 34
- |
- 6
- |
- 8
Published：2020-08-12 -
Application of CAD in Design and Manufacture for Optical thin Films
Abstract：The paper introduced applications of computer asisted design(CAD)in a design and manufacture for optical-thin-films and gives a few of typical design examples.Allowance differences of optical thin film thickness are calculated by CAD;film thickness programme controled in coating process is also designed by CAD;as well as a typical instance for a coating process simplified is given,which enhance a coating effeciency and bring some benefits to the people.Keywords：CAD;Optical thin films- 38
- |
- 5
- |
- 1
Published：2020-08-12 -
A Study of CAD and Ergonomics
Abstract：According to ergonomics,this paper applys CAD techniques to study the relationships of interaction of man-machine-environment,and for the optimum effect of CAD.This paper also gives an example for the engineers and man who study CAD tchniques and ergonomics as reference.Keywords：CAD;Ergonomics- 38
- |
- 6
- |
- 0
Published：2020-08-12 -
Design and Calculation of Planetary Gear Drive of the Few Difference in Number of Teeth and the CAD
Abstract：This paper describes the method which is used for designing the drive of the few difference in number of teeth and the algorithm of the CAD.It consist of the operating principle,the parameter selection,the geometrical calculation,the computer block diagram and the tables of modification coefficient.According to given program,the geometrical parameters of 284 internal gear pairs have calculated by the computer and the calculation example has given in this paper.The practice result indicates that the method of the design and the calculation is correct and it is able to provide references.Keywords：The few difference in number of teeth;Modification coefficient;Interference of profile;Contact ratio- 44
- |
- 6
- |
- 0
Published：2020-08-12 -
Computer Simulation of Shrink Ratio Experiment for Aerospace Seal Window
Abstract：The reliability of window has been analyzed by means of CAE in this paper. It is discussed that the experiment of shrinked model is used to verify the ability of bear pressure for real structure. The regular pattern of anti-pressure has been found in theory by computer simulation, and offered scientific accordance for shrink ratio experiment of window.Keywords：Window;Reliability;Shrink ratio- 35
- |
- 4
- |
- 0
Published：2020-08-12 -
A Study on Static Thermal Properties of Primary Mirror
Abstract：The importance of thermal design and thermal analysis of primary mirror is stated in this paper. The deformation of the primary mirror in temperature field and its effect no the image quality of the optical system is analized. The deformation of surface figure of a primary mirror in radial static temperature field, K9 and fused silica responsively, is calculated and analized in detail. It is found that as though the structure is not different, the deflection of the surface figure of the mirror is not only connected with alpha and other thermal and structural paremeter, but also directly connected with the magnitude and direction of the temperature gradient.Keywords：primary mirror;Deformation of surface figure;Static temperature field;Temperature gradient- 36
- |
- 6
- |
- 8
Published：2020-08-12 -
Thermal Analysis of Space Optical System
Abstract：This paper takes the analysis of temperature and thermal-induced displacement distribution of space optical systems by the means of CAE,thermal control measure is adopted based on analysis and simulation , the thermal responces are greatly reduced.Keywords：FEM;Space optical system;Thermal control- 56
- |
- 12
- |
- 7
Published：2020-08-12 -
Preliminary analysis and calculation on structure of spaceship optics aimming lens
Abstract：The spaceship optics aimming lens is a kind of optical instrument in the space.In the paper engineering analysis and calculation have been done by using FEA.An important conclusion of being feasible on structure has been obtained.Based on the analysis further optimum design could be approached.Keywords：Optics aimming lens;FEA- 36
- |
- 5
- |
- 1
Published：2020-08-12 -
Research of Several Influence Factors on Dynamical Property of Optical Device
Abstract：This paper probes into some factors that influence on the dynamical properties of space camera ,and finds the methods of improving the dynamical stiffness and reducing response .It also provides certain reference for practical engineering problems.Keywords：Dynamical stiffness;Dynamical response;FEM;space camera- 40
- |
- 7
- |
- 0
Published：2020-08-12 -
Application of CAE in Bio mechanics
Abstract：This paper describes the application of CAE technology in the field of Bio-mechanics,the leg bone of human is taken as an example,the mechanism of broken leg born being curied and the related fixed structure device have been studied by means of FEA.Keywords：Bio-mechanics;FEA- 50
- |
- 7
- |
- 1
Published：2020-08-12 -
Studies on Environment and Structure performance of Horticulture Instrallation(3)Mechanical Performance Anaslysis of Frame of Ellipse Solar Greenhouse's Front Face
Abstract：By means of computer axiliary engineering analysis,the frames in front of greenhouse in different loads were analyzed mechanically.The laws of internal stress's distribution were researched so as to provide the scientific basis for prsctical design.Keywords：Greenhouse;FEM- 32
- |
- 5
- |
- 0
Published：2020-08-12 -
Application of CAD/CAM Technology in Manufacture of Optics Instrument Parts
Abstract：The technological process and primary functions of CAD/CAM are discribed in this paper.It is proved that CAD/CAM system is an effective tool for designing and manufacture optical instrument parts.Keywords：CAD/CAM;Tool path;GPM;MDF- 34
- |
- 5
- |
- 3
Published：2020-08-12 -
NC Milling of Cam Contour Ccurve
Abstract：Cam mechanism is used for various machine and instrument.To mill the cam contour curve , a simply NC milling machine was used in the past. It took a long time to make a program ,and the precision was lower.This paper introduces ,in UWF1202H machining center ,using parameter programming function of TNC426 system to make a NC program directly,and machining high precision cam contour curve quickly.Keywords：Cam contour curve;NC milling- 57
- |
- 6
- |
- 1
Published：2020-08-12 -
Design and Analysis of a High Precision Constant Current Source
Abstract：In this paper,a developed high precision constant current source is proposed and analysed including the circuit composition and working principle description,the frequency and temperature characteristics analysis,the stability compensation method selection and the compensation parameters optimization.The amplitude of its output current possesses high precision and good temperature stability.All given parameters have been adjusted and may be used without being modified.Keywords：Constant current source;stability;Temperature characteristics;frequency characteristics- 40
- |
- 5
- |
- 1
Published：2020-08-12 -
Method of Construction and Realization on Optimized Model of Analogue Circuit
Abstract：According to theory of optimized design,a practicable method on optimized design of circuit is proposed and can improve efficiency of optimized design.Keywords：Analogue circuit;optimization- 69
- |
- 7
- |
- 0
Published：2020-08-12 -
Computer Aided Analysis of Networks Containing Operational Amplifiers
Abstract：Network containing operational amplifiers is topologically analysed by computer.The method of defining common trees between current graph and voltage graph is used for obtaining the all symbolic network function.Keywords：Current graph;Voltage graph;Operational amplifier;Symbolic network function- 37
- |
- 6
- |
- 0
Published：2020-08-12 -
Hardware Description and Realization on Digital System
Abstract：The method and procedure on hardware description and realization of digital system is stated.The detail applied method is provided with the design on programmable logic device.Keywords：Digital system;Hardware description;Programmable logic device- 38
- |
- 6
- |
- 0
Published：2020-08-12
Loading...
0