Issue Ebookcover storyIssue CoverIssue Contents
Online FirstList of IssuesDocument Types
Research on time-domain phase heterodyne Mach-Zehnder interferometric method based on photoelastic modulation AI Introduction
Abstract:Conventional Mach-Zehnder interferometry relies on intensity variations or spatial fringe movement for demodulation, which inherently limits its sensitivity and resolution.To address this issue, this paper proposed a novel time-domain phase heterodyne interferometric technique based on photoelastic modulation. While preserving the advantages of the conventional dual-beam interferometric configuration, the proposed method exploited the high-precision polarization control capability of photoelastic modulation to encode the phase difference between the measurement and reference arms onto a time-domain high-frequency signal. The in-phase and quadrature components at the fundamental and second harmonic frequencies were extracted via digital lock-in amplification, enabling precise determination of the phase difference to be measured. A corresponding experimental setup was established, and zero optical path difference calibration was performed. A graded neutral-density filter was employed as the test sample for experimental validation. The results demonstrate that the maximum standard deviation of the system is 2.8×10⁻⁴ rad,and the measured thin-film thicknesses are in good agreement with those obtained by ellipsometry,with a maximum relative deviation of 0.69%.These findings indicate that the proposed method achieves high-sensitivity and high-precision optical thickness measurement, and is expected to provide a novel technical solution for precision phase measurement applications such as biological sample analysis and micro/nanostructure characterization.Keywords:photoelastic modulation;Mach-Zehnder interferometry;time-domain phase heterodyne;quantitative phase95|34|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14Progressive addition lens surface reconstruction with sparse supervision and residual-gradient constraints AI Introduction
Abstract:To improve the reconstruction accuracy and optical performance of the back surface of progressive addition lenses, we propose a method for surface reconstruction using a sparse supervised residual gradient-constrained physics-informed neural network. A second-order nonlinear partial differential control equation was formulated based on the relationship between the rear-surface sagittal height and the mean curvature, with two-dimensional coordinates as inputs and sagittal height as the output; first- and second-order derivatives were obtained using automatic differentiation. Based on the residuals of the partial differential equation and boundary constraints, a gradient constraint in the residual space and sparse geometric supervision were introduced to construct a joint loss function. Three sets of progressive lenses with an add power of 2 D-0-2 D, -1-1 D, and -2-0 D-were selected. Reconstruction was performed using both the explicit finite difference method and the proposed method, and six lenses were fabricated for testing. Under a 1% sparse supervision ratio, the proposed method can reliably reconstruct the back progressive addition lenses' surfaces of three sets of progressive lenses. The average absolute error for the three sets of lenses ranges from 0.70 to 1.15 μm, the root-mean-square error ranges from 1.20 to 2.47 μm, and the relative L₂ error ranges from 2.99×10⁻⁴ to 6.26×10⁻⁴, with surface reconstruction errors reaching the micrometer level. Compared with the explicit finite difference method, the difference in optical power for the distance zone of the three lens sets obtained by the proposed method is 0.01 D, while the difference in the near zone ranges from 0.02 to 0.04 D; the ADD errors were reduced from 0.09, 0.08, and 0.09 D to 0.06, 0.05, and 0.05 D, respectively, while the absolute values of astigmatism in the distance zone decreased by 0.03, 0.01, and 0.01 D, respectively, and the maximum peripheral astigmatism was approximately 1.25 times the ADD. The fabrication and measurement results showed that the progressive-corridor widths of the three lens groups increased by 0.56, 0.37, and 0.37 mm. The proposed method achieves micrometer-level continuous reconstruction of the rear surface of progressive lenses and demonstrates certain optimization effects in terms of ADD error, astigmatism in the distance zone, and intermediate channel width. The processing and testing results confirmed the feasibility of this method for reconstructing free-form lenses, while also indicating that visual performance metrics, such as spot width, need to be further incorporated into the reconstruction constraints in future work to improve the overall optical performance of the design results.Keywords:freeform progressive addition lenses;residual gradient constraints;sparse supervision;physics-informed neural networks;optical power;astigmatism64|36|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14Laser scanning confocal TSV defect non-destructive inspection AI Introduction
Abstract:Advanced packaging Through-Silicon Via (TSV) technology is a core support for the development of modern microelectronics and semiconductor packaging, the defect detection of it is crucial for ensuring the performance and reliability of devices. To achieve non-destructive inspection of internal defects in TSVs and in response to the existing bottlenecks of the TSV optical inspection technology, such as the blind areas of the metal layer that could lead to missed detections, etc., this paper built a set of non-destructive testing equipment for TSV defects based on the principle of near-infrared confocal. This equipment employed the 1310 nm near-infrared wavelength laser as the detection light source, and based on this, near-infrared confocal objectives were designed. This objective lens could effectively correct the aberrations caused by deep holes with high aspect ratio, ensuring clear imaging of the internal structure of TSV. The optical detection system established in this article integrated a high-precision displacement stage, which could achieve multi-area scanning, image registration and stitching. Finally, a TSV defect morphology characterization model was built based on the detection data. The experimental results show that the imaging rate of this system at a resolution of 512×512 is 0.33 FPS, the single scan field of view in the xy plane is 100 μm×100 μm, after image stitching, it can be expanded to 1 000 μm×1 000 μm; The z-axis direction can achieve a detection depth of 100 μm, with a defect detection rate of 96%.This technology enables non-destructive and high-precision three-dimensional defect detection of TSV, providing an effective technical means for the quality characterization of advanced packaging TSV.Keywords:Through-Silicon Via(TSV);defect detection;near-infrared confocal;aberration correction63|26|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
Modern Applied Optics
Optimization and verification of satellite micro-vibration induced by flywheel imbalance AI Introduction
Abstract:For the fundamental harmonic response of satellite micro-vibration induced by flywheel imbalance, conventional passive vibration isolation offers limited low-frequency suppression, and discrete-speed testing tends to miss risks associated with structural modal coupling. Taking a small-to-medium-sized remote sensing satellite as the research object, this paper proposed an optimization method for micro-vibration suppression based on a rigid–flexible coupled dynamic model, and verified it through ground low-frequency suspension tests. The theoretical results agreed well with the experimental results in the rotational speed range of 400-2 000 r/min. First, an 8-degree-of-freedom whole-satellite dynamic model incorporating flywheel imbalance and flexible solar array appendages was established, enabling the prediction of the continuous spectrum of optical payload pixel offset induced by the Y-axis flywheel over the 0-2 000 r/min rotational speed range. Analysis revealed that the fundamental harmonic response consisted of a "quasi-static constant-response region" governed by the satellite mass and flywheel position, and a "modal amplification region" dominated by solar array structural modes. For the quasi-static constant-response region, the flywheel mounting position was optimized. After optimization, the fundamental harmonic of the X-direction pixel offset was reduced by 66.7% compared with the initial position and by 90.7% compared with the reference position, effectively suppressing the response over the full speed range. For the modal amplification region, a robust forbidden rotational speed interval of the flywheel during imaging missions was derived based on micro-vibration criteria. This study provided a new approach to micro-vibration suppression for remote sensing satellites through layout optimization without modifying existing vibration isolation schemes.Keywords:flywheel;imbalance;micro-vibration;fundamental harmonic;optimization70|24|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14- Abstract:Cross roller guides are one of the most important components for precision stages because the quality of the linear rail influences the precision of linear motion. In response to the strict quality control requirements, this paper presented a visual measurement method for the geometric parameters of cross roller guideways. In measurement, standard balls were placed in the guide groove, and two imaging systems mounted separately in vertical and horizontal collected images. The vertical and horizontal straightness and parallelism of guide rails were measured simultaneously based on the ball centers, which were determined according to edge detection and arc fitting. Considering the influence of guide surface chamfers on the accuracy of parallelism evaluation, a dual-image parallelism evaluation method was established using two images captured in forward and reverse directions. The measurement system was developed and eight repeated experiments were performed on the cross roller guide with a length of 75 mm. Experimental results show that the standard deviations of straightness and parallelism are 0.000 7 mm and 0.002 8 mm respectively. The proposed method is able to achieve high accurate straightness and parallelism measurement of cross roller guides, and can be applied to on-line measurement.Keywords:cross roller guide;machine vision;Straightness;parallelism41|26|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
A heliostat cleaning attitude calibration method based on image recognition technology AI Introduction
Abstract:Aiming at the industrial pain points that traditional LiDAR navigation was easily disturbed by mirror reflection and the attitude calibration accuracy was insufficient during the mirror cleaning operation of heliostats in tower solar thermal power plants, this paper proposed a heliostat cleaning attitude calibration method based on monocular image contour detection. This method extracted the sub-pixel contour features of the heliostat edge, and combined the global coordinate transformation model of the power plant to realize the non-contact high-precision solution of the relative pose between the cleaning vehicle and the mirror. Full-process field measurement verification was completed in a certain tower solar thermal power plant. The results show that the average solution errors of azimuth and elevation are 1.10° and 0.92° respectively, the average positioning error of the cleaning vehicle in the three directions is less than 0.35 m, which meets the positioning requirement of the cleaning lane; the detection accuracy of deviated heliostats reaches 96.2% under mirror reflection interference,which avoids the ranging failure caused by insufficient echo signal-to-noise ratio on clean mirrors that limits the traditional LiDAR scheme, and the overall cleaning operation efficiency is improved by about 75%.This method does not need to rely on high-precision inertial navigation equipment, and can be directly adapted to the low-cost hardware transformation of existing mainstream heliostat cleaning vehicles, providing an efficient and feasible technical path for the intelligent operation and maintenance of large-scale mirror fields.Keywords:heliostat cleaning;attitude calibration;image recognition;coordinate transformation;solar thermal power plant;cleaning vehicle positioning;contour detection61|22|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
Micro\/Nano Technology and Fine Mechanics
- Abstract:A time-frequency dual-branch fusion object detection network, TFDFusion-YOLO, was proposed for joint splice tower localization and aeolian vibration identification in distributed transmission-line condition monitoring. Vibration data from optical fiber composite overhead ground wires collected by distributed acoustic sensing were converted into cepstrum feature maps and autocorrelation function feature maps, which served as dual inputs to represent the periodic characteristics in the frequency domain and the correlation characteristics in the time domain. A set of branch-adaptive heterogeneous attention enhancement units was constructed to improve the extraction of key information from the two branches. A channel-aware dual-aggregation feature fusion module was further designed, in which dynamic gating vectors adaptively weighted cross-branch complementary features and intra-branch self-attention features. The output layer then performed object localization and category classification. Experiments on field data show that the proposed model achieves a mean average precision of 97.1%, representing an 8.5% improvement over the baseline YOLOv11n and outperforming other comparison methods. By effectively exploiting the complementary time- and frequency-domain information in distributed acoustic sensing vibration signals, TFDFusion-YOLO enables simultaneous splice tower localization and aeolian vibration identification, providing a useful reference for distributed abnormal-state detection and early risk warning in transmission lines.Keywords:transmission lines;distributed optical fiber acoustic sensing;tower localization;aeolian vibration;object detection;feature fusion48|25|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
- Abstract:To address pseudo-relevant matching caused by repetitive background structures in UAV video-text cross-modal retrieval, this paper proposed a video-text retrieval method integrating text discrimination, temporal constraints, and neighborhood suppression. The proposed method adopted the pre-trained CLIP vision-language model as the backbone. Firstly, a text semantic collapse suppression module was introduced to enhance the discriminability of different text descriptions associated with the same video through local matching probability modeling and a text discriminative constraint. Secondly, a temporal structure constraint module was designed to improve the separability of intra-video temporal semantics through frame-to-segment temporal alignment and a non-adjacent segment discriminative constraint. Finally, a pseudo-relevant neighborhood suppression module was proposed to compute neighborhood centrality from the repeated occurrence of candidate videos across the high-scoring neighborhoods of multiple text queries, while reducing the interference of pseudo-relevant matching through neighborhood balance weights and a neighborhood-balanced ranking loss. Experimental results show that the proposed method achieves competitive retrieval performance on the CapERA, MSR-VTT, DiDeMo, and ActivityNet Captions datasets, with R@1 scores of 17.3%, 50.1%, 47.2%, and 45.6%, respectively; it outperforms the compared methods on most key metrics, demonstrating its effectiveness in UAV and general video-text retrieval scenarios.Keywords:video-text retrieval;UAV video-text retrieval;text semantic collapse suppression;temporal structure constraint;pseudo-relevant matching62|27|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
- Abstract:To address the problems of unstable point-cloud representation for long-range objects, image features being susceptible to occlusion and background interference, and local spatial misalignment between point-cloud and image features in multimodal 3D object detection, a multi-stage feature enhancement and fusion method was proposed. In the point-cloud feature extraction stage, neighborhood relationships were established by jointly considering spatial distance and feature distance, and the weights of the two distances were generated from the input features to enhance geometric representation in sparse regions. After image features were projected into the point-cloud space, reliability weights were generated according to point-cloud geometric responses to suppress low-quality image semantics. In the fusion stage, bidirectional deformable cross-attention was used to calibrate the local positions of point-cloud and image features, and modality-guided convolution was introduced to preserve effective geometric and semantic information. On the KITTI validation set, the mAP values of the proposed method for cars, pedestrians, and cyclists reach 91.2%, 68.4%, and 78.5%, respectively. On the nuScenes test set, the proposed method achieves 72.8% mAP and 75.1% NDS. Ablation experiments show that detection performance improves continuously as each functional module is progressively added. The model complexity analysis shows that although the complete model increases the number of parameters, FLOPs, and inference time, its mAP improves from 66.5% to 72.8%. In experiments with five random seeds, all evaluation metrics exhibit small fluctuations. The proposed method improves the fusion quality of point-cloud and image features in complex scenarios, achieves high detection accuracy for long-range and occluded objects, and demonstrates good stability and reproducibility.Keywords:3D object detection;multimodal fusion;dynamic neighborhood enhancement;reliability gating;deformable attention59|26|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
- Abstract:To address low-light degradation, local strong-light interference, insufficient texture representation, and difficulty in structural preservation in infrared and visible image fusion under complex nighttime degraded scenes, an infrared and visible image fusion method based on degradation awareness and structure guidance, named DGSFusion, was proposed. Firstly, a degradation-aware representation module was constructed to model nighttime degradation factors from modal discrepancy, low-light prior, brightness prior, and edge discrepancy, providing degradation-conditioned priors for subsequent fusion. Then, a degradation-conditioned unified cross-modal fusion module was designed to introduce degradation information into the multi-scale feature fusion process, enabling the network to adaptively adjust the fusion strategy according to degradation states in different regions. Furthermore, a geometry-guided phase enhancement module was developed to enhance edge, contour, and structural information from both spatial structure and frequency-domain phase perspectives. Meanwhile, a detail refinement unit was introduced to improve local texture representation and overall visual stability through low-frequency guidance, multi-scale detail extraction, and residual refinement. Experimental results show that the proposed method achieves the best performance in average gradient, spatial frequency, information entropy, multi-scale structural similarity, and visual information fidelity, Compared with the average results of all competing methods, the proposed method improves these metrics by 27.47%, 20.19%, 12.31%, 18.64%, and 35.72%, respectively. Subjective visual comparisons and nighttime pedestrian detection experiments further verify the effectiveness of the proposed method in preserving infrared target responses, retaining visible texture details, and supporting downstream visual tasks.Keywords:infrared and visible image fusion;nighttime degradation awareness;cross-modal fusion;geometry-guided structure enhancement74|35|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
- Abstract:Optical Coherence Tomography Angiography (OCTA) enables the non-invasive, high-resolution visualization of retinal microvascular networks; precise vessel segmentation is crucial for the screening, diagnosis, and therapeutic assessment of retinal diseases. However, OCTA vessel segmentation remains challenging due to issues such as low-contrast capillaries and interference from artifacts and noise, which often lead to blurred boundaries and compromised connectivity. To address these challenges, this paper proposed a retinal vessel segmentation network that synergized frequency and spatial edge information. First, a frequency-spatial initial embedding module was designed to extract spatial statistical information and multi-frequency structural features by combining max pooling, average pooling, identity mapping, and wavelet-domain convolution branches, thereby providing rich shallow representations for subsequent encoding. Second, a multi-scale receptive field-enhanced spatial state block was constructed; this integrated depth-wise convolutions with varying dilation rates and 2D state-space modeling to characterize multi-scale local vessel morphology while establishing long-range spatial dependencies. Subsequently, a cross-domain gated bottleneck module was introduced at the network bottleneck to facilitate deep cross-domain information interaction through bidirectional gating between frequency-domain responses and spatial semantics. In the decoding stage, an edge-guided fusion module was employed to spatially filter skip-connection features using high-level semantic information, thereby reducing the transmission of redundant background information while preserving boundary-related details. Through these designs, the network established a synergistic feature modeling process that integrated shallow frequency-spatial representation, deep cross-domain interaction, and edge recovery during decoding. Experimental results demonstrate that the proposed method achieves Dice coefficients of 87.77%, 85.38%, and 91.81% on the OCTA500-3M, OCTA500-6M, and ROSSA datasets, respectively, validating its effectiveness for OCTA retinal vessel segmentation.Keywords:optical coherence tomography angiography;retinal vessel segmentation;state-space model;frequency-space embedding;edge-guided fusion;cross-domain gating64|29|0<HTML><L-PDF> <WORD> <Meta-XML>Updated:2026-11-14
Information Sciences









