Chinese Version Light学术出版中心
Latest Issue
Issue 6 ， 1993
-
Optical Design of Multistage Periscope with Performance of Anti-Nuclear Radiation
Abstract：This paper describles optical design of Multistage periscope with performance of And-nuclear radiation,which is developed successly recently. Overall light path arranging and initial parameter calculating are given;The abberration properties of optical system are investigated;The abberation balancing method and abberration curves is also given. Finally,the results of the periscope optical system is tested.Keywords：Antti-nuclear radiation;Periscope;Multistage- 29
- |
- 5
- |
- 0
Published：2020-08-12 -
Optoelectronic Parallel Adder/Subtractor
Abstract：A space-positon-coding version fitting to parallel MSD algoithm is proposed,and a 3-stage butterfly interconnection model of full-adder/subtractor is built,which is verificated by experiment. Therefore, effectively combination of parallel algorithm and parallel implementing structure is achieved.- 33
- |
- 6
- |
- 0
Published：2020-08-12 -
Precision Analyses of the Instrument for Volume Measurement of Coal Heap
Abstract：On the basis of optical triangulation theory,the analytical formulas of discernment error are derived,and the discernment error for trapezoid cross-section of coal heap with different height are calculated. According to the residue of formulas for double trapezoid integral and central limit theorem, the distribution function which are in accord with Gauss for discernment errors of total volumes are derived. Finally, some conclusions about error estimating for a series of cases are presentedKeywords：Optical triangulation;Discernment error;Residual error- 31
- |
- 5
- |
- 0
Published：2020-08-12 -
Operation Control System for a Measuring Instrument of Coal Heaps
Abstract：Principle of operation control system for a measuring instrument of coal heaps is presented. To assure operation reliability of the instrument, some steps which combined software with hardware together are described in detail in this paper.Keywords：Coal heap;control system;Measuring instrument- 31
- |
- 5
- |
- 0
Published：2020-08-12 -
Consideration for the Parameters of Optical System in CCD TV Tracking and Measuring
Abstract：This paper produces the method about determining the parameters of CCD TV tracking-and-measuring optical system in details according to CCD the intensity of illumination sensitivity and the signal noise ratio essential for the detectable object.Keywords：Tracking and measuring;optical system- 41
- |
- 5
- |
- 0
Published：2020-08-12 -
Two Coordinate and Dual Positioning Technology Research in Feed System of Ultra-Precision Lathe
Abstract：The high accuracy is commonly in conflict with the large-stroke in the feed system of Ultra-precision lathe, so one of the key technologies in presently Ultra-precision-maching is to develope a kind of feed system with better dynamic and stationary characteristic, large-stroke and high accuracy.This paper contributs a new kind of principle and its practical methol. It comprehensively utilizes computer technology,dynamic detection, signal processing, control theory, sensor and micro-displacement technologies etc. to divide the accurate feed into two parts; master feed and compensation feed. The two parts are harmoniously continuously controlled respectively. This method effectively solve the contradiction between the large-stroke and high accuracy. The technique can increase the positioning accuracy of common feed system by ten times and enlarge the stroke of the micro-feed system.Keywords：Ultra-precision lathe;Dual positioning;MPC- 27
- |
- 5
- |
- 0
Published：2020-08-12 -
Research and Manufacture of the Auto-sorter for Small-scale Geometric Dimension
Abstract：The paper introduces principle and property of auto-sorter which used in sorting small-scale geometric dimensional objects, such as piston. This paper also introduces how to use mierocomputer in processing data, controlling and auto-sorting.Keywords：Itelligence;Piston;Geometric dimension;Auto-sort- 40
- |
- 6
- |
- 0
Published：2020-08-12 -
Structure Design and Fabrication of the Micro-plane Mechanism
Abstract：By the design, fabrication and testing of many Micro-plane mechanisms, we have advanced a successful technological process and fabricated many micro-mechanisms which can move freely. We have further studied the problems about the kinematics, dynamics and friction of the mechanism.Keywords：Micro-mechanism;Micro-type;IC technology- 34
- |
- 6
- |
- 0
Published：2020-08-12 -
The Progression of Simulating Human Intelligent Control
Abstract：This paper firstly expounds the idea and method of simulating human intelligent control (SHIC), then, summerize the formation, developments and present status of SHIC systematically, and finally, the further reseach fields are indicated.Keywords：Simulating human intelligent control;intelligent control;Artificial intel-ligence- 44
- |
- 8
- |
- 0
Published：2020-08-12 -
Mathematic Model and Experiment Analysis of the Automatic Supply System with Gas Vibration
Abstract：This paper introduces the design foundation of the automatic supply system in gas dry-powder disperser for size determing-instrument, sets up its mathematic model, prives that the motion of this system is simple harmonic vibration through theory and experiment analysis, and points out the relation of the period and balance point of vibration with the concerned parameters. It has very important direct significance to the design of the system.Keywords：Powder material;Gas vibration;Mathematic model- 31
- |
- 5
- |
- 0
Published：2020-08-12 -
Digital Capacitive Micrometer and Its Accuracy Improving
Abstract：This paper introduced a new type micro-displacement measurement instrument which has a high accuracy, called "digital capacitive micrometer". It can be used for the precision measurement of workpiece shape error and dimensions parameters and the dynamic tast of mechanical vibration and shock. Based on error analysis, improved methods are given for higher accuracy in the paper. Theoretical analysis and experiment show that the improving measures are effective.Keywords：Micro-displacement measurement;Measuring erroe;Frequency drift- 16
- |
- 5
- |
- 0
Published：2020-08-12 -
Hardness Measurement Through Computer Image Processing
Abstract：This paper provides a method of measuring metal hardness by using Quantitative Metallurgical Image Analysis System. The authors discussed the designing clue and the practical proces to measure V-hardness or K-hardness, provided a fast and precise tool of physical and chemistry analysis to factories’ current production and new product development,and effien-ciently ensures product quality and upgrade the level of physical and chemistry test.Keywords：V-hardness;K-hardness;Quantitative metalurgraphy;image processing- 28
- |
- 6
- |
- 0
Published：2020-08-12 -
Research and Application of Mechanical Probe System Employed on Five-meter Leadscrew Grinder
Abstract：This thesis discusses how to arrange and design the mechanical probe system used for great leadscrew workpiece on five-meter-long leadscrow grinder. This measurement is proved to be very successful. It does not need any special five-meter dynamic measuring instruments. The light and portable deflection probe can be easily clamped and released by hand. It is very economic to take measurements of the ball leadscrow and the rectangle, angle leadscrow etc. using the probe of ruby cylinder or ball. This method puts forwards a new thinking having broad prospects for the leadscrew dynamic measurement.Keywords：Deflection probe;Double frequency laser interferometer;Radial grating- 31
- |
- 5
- |
- 0
Published：2020-08-12 -
1KW Grade Axial Flow CO2 Laser with a Turbine
Abstract：1000 watt grade axial flow CO2 laser with a turbine is reported in this paper. Because we have salved the question for pollution from oil. The time of close cycle by working gas overs four hours and it has very visible economic gainings.Keywords：Turbine;Close cycle- 42
- |
- 6
- |
- 0
Published：2020-08-12 -
The LIGA
Abstract：The paper narrates a new technology suitable for the making of micromechanics-the technical composition of LIGA technology. The paper introduces emphatically the making step and method of X-ray lithograph etching in LIGA technology.Keywords：LIGA technology;X-ray lithograph etching- 25
- |
- 5
- |
- 0
Published：2020-08-12
Loading...
0